[Fri Sep 30 00:45:28 2011] Detection parameters:
  Position = (972.3, 982.2) = 6 9 33.88 24 17 58.2
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 55.3 +/- 7.5
  Background counts = 0.7
  Rate = 0.001 +/- 0.0001

[Fri Sep 30 00:45:30 2011] Off-axis axis estimate = 1.45'
[Fri Sep 30 00:47:06 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:06 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 30 00:47:06 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.898
[Fri Sep 30 00:47:06 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.39"
[Fri Sep 30 00:47:07 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 00:47:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 00:47:07 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 00:47:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 00:47:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12031_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:07 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 00:47:07 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 00:47:07 2011] Fit fullrun_ccd1_acisf12031_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 00:47:31 2011] Spatial fit model total counts = 56.999300, observed total counts = 58.000000
[Fri Sep 30 00:47:31 2011] Offset between fit and detection position for source 3 = 0.653530 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.653530 pixels
  Position = (972.7, 982.6) = 6 9 33.88 24 17 58.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 56.6 +/- 7.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Fri Sep 30 00:47:31 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:31 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:47:31 2011] Source does appear to be extended
[Fri Sep 30 00:47:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:14 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Sep 30 00:48:14 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.261
[Fri Sep 30 00:48:14 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.41"
[Fri Sep 30 00:48:14 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 00:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 00:48:14 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 00:48:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 00:48:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12031_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:15 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 00:48:15 2011] fullrun_ccd1_acisf12031_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 00:48:15 2011] Fit fullrun_ccd1_acisf12031_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 00:48:39 2011] Spatial fit model total counts = 55.582200, observed total counts = 57.000000
[Fri Sep 30 00:48:39 2011] Offset between fit and detection position for source 3 = 0.036071 pixels
[Fri Sep 30 00:48:39 2011] 55.580800 total counts/ 0.000000 bgd. counts: snr = 184140331366.214233
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.036071 pixels
  Position = (972.8, 982.6) = 6 9 33.88 24 17 58.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 55.6 +/- 7.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Fri Sep 30 00:48:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:39 2011] Source does appear to be extended
[Fri Sep 30 00:48:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:51:32 2011] Not overwriting source region fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 00:51:32 2011] Extracting stamp from image fullrun_ccd1_acisf12031_pi14-548_cl_sm2.00.img.gz, (954, 964) - (992, 1002)
[Fri Sep 30 00:51:32 2011] Writing fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 00:51:42 2011] ../../acisf12031/products/events/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.evt and ../../acisf12031/products/events/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 00:51:42 2011] Size of ../../acisf12031/products/events/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.evt.gz[events] = 57 counts
[Fri Sep 30 00:51:42 2011] Mean chipx,y = (74.72, 974.32)
[Fri Sep 30 00:51:42 2011] Mean tdetx,y = (4157.68, 4181.72)
[Fri Sep 30 00:51:42 2011] chipx,y range = (56.00-91.00, 957.00-991.00)
[Fri Sep 30 00:51:42 2011] Size of ../../acisf12031/products/events/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Fri Sep 30 00:51:42 2011] ../../acisf12031/products/images/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.img and ../../acisf12031/products/images/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 00:51:42 2011] ../../acisf12031/products/spectra/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.pi and ../../acisf12031/products/spectra/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 00:51:42 2011] Not generating rmf since there are only 55 counts
[Fri Sep 30 00:51:45 2011] ../../acisf12031/products/lightcurves/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 00:53:19 2011] 198.946
[Fri Sep 30 01:00:18 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:18 2011] Error reading totcts from fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 01:00:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:18 2011] Using photon index=1.80, rate=0.000985, arf fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 01:00:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:18 2011] Updating source flux to 1.2e-14
[Fri Sep 30 01:00:35 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 01:00:36 2011] acisf12031/analysis//spectral/fullrun_ccd1_acisf12031_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete