[Fri Sep 30 00:45:27 2011] Detection parameters:
  Position = (407.8, 150.6) = 6 9 53.59 24 19 41.2
  Extent = 1.5" x 0.5", rotation angle = 142 degrees
  Source counts = 11.7 +/- 3.9
  Background counts = 3.3
  Rate = 0.0002 +/- 7e-05

[Fri Sep 30 00:45:27 2011] Off-axis axis estimate = 6.01'
[Fri Sep 30 00:47:05 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:47:05 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Sep 30 00:47:05 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.955
[Fri Sep 30 00:47:05 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 1.64"
[Fri Sep 30 00:47:06 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19.ximg exists
[Fri Sep 30 00:47:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 00:47:06 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Sep 30 00:47:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 00:47:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12031_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:47:06 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Sep 30 00:47:06 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Sep 30 00:47:06 2011] Fit fullrun_ccd0_acisf12031_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Sep 30 00:47:28 2011] Spatial fit model total counts = 19.731700, observed total counts = 16.000000
[Fri Sep 30 00:47:28 2011] Offset between fit and detection position for source 22 = 0.728506 pixels
[Fri Sep 30 00:47:28 2011] 20.168180 total counts/ 7.036980 bgd. counts: snr = 4.950069
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.728506 pixels
  Position = (407.4, 151.2) = 6 9 53.62 24 19 41.2
  Extent = 1.0" x 1.0", rotation angle = 0
  Source counts = 13.1 +/- 4.5
  Background counts = 7.0
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 00:47:28 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:47:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:47:28 2011] Assessing source extent using major
[Fri Sep 30 00:47:28 2011] Source does appear to be extended
[Fri Sep 30 00:47:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:48:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:48:12 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Fri Sep 30 00:48:12 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Fri Sep 30 00:48:12 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.01"
[Fri Sep 30 00:48:13 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18.ximg exists
[Fri Sep 30 00:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18.csv
[Fri Sep 30 00:48:13 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Sep 30 00:48:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18.csv
[Fri Sep 30 00:48:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12031_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:48:14 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Sep 30 00:48:14 2011] fullrun_ccd0_acisf12031_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Sep 30 00:48:14 2011] Fit fullrun_ccd0_acisf12031_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Sep 30 00:48:36 2011] Spatial fit model total counts = 14.810700, observed total counts = 14.000000
[Fri Sep 30 00:48:36 2011] Offset between fit and detection position for source 22 = 0.610058 pixels
[Fri Sep 30 00:48:36 2011] 14.883300 total counts/ 0.000000 bgd. counts: snr = 671929883209191.375000
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.610058 pixels
  Position = (407.3, 151.8) = 6 9 53.63 24 19 41.5
  Extent = 1.3 (1.1-1.9)", rotation angle = 0
  Source counts = 14.9 +/- 3.9
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Fri Sep 30 00:48:36 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:48:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:48:36 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:48:36 2011] Source does appear to be extended
[Fri Sep 30 00:48:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:49:26 2011] Not overwriting source region fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.reg
[Fri Sep 30 00:49:26 2011] Extracting stamp from image fullrun_ccd0_acisf12031_pi14-548_cl_sm2.00.img.gz, (348, 92) - (467, 211)
[Fri Sep 30 00:49:26 2011] Writing fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22.gif
[Fri Sep 30 00:50:40 2011] ../../acisf12031/products/events/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.evt and ../../acisf12031/products/events/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Fri Sep 30 00:50:40 2011] Size of ../../acisf12031/products/events/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.evt.gz[events] = 15 counts
[Fri Sep 30 00:50:40 2011] Mean chipx,y = (396.87, 892.53)
[Fri Sep 30 00:50:40 2011] Mean tdetx,y = (3953.53, 4735.13)
[Fri Sep 30 00:50:40 2011] chipx,y range = (382.00-419.00, 873.00-908.00)
[Fri Sep 30 00:50:40 2011] Size of ../../acisf12031/products/events/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 60 counts
[Fri Sep 30 00:50:40 2011] ../../acisf12031/products/images/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.img and ../../acisf12031/products/images/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Fri Sep 30 00:50:40 2011] ../../acisf12031/products/spectra/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.pi and ../../acisf12031/products/spectra/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Fri Sep 30 00:50:40 2011] Not generating rmf since there are only 14 counts
[Fri Sep 30 00:50:43 2011] ../../acisf12031/products/lightcurves/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.lc and ../../acisf12031/products/lightcurves/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Fri Sep 30 00:51:31 2011] 182.866
[Fri Sep 30 01:00:17 2011] Updating aperture counts using extracted products
[Fri Sep 30 01:00:17 2011] Error reading totcts from fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_src.pi.gz
[Fri Sep 30 01:00:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 01:00:18 2011] Using photon index=1.80, rate=0.000264, arf fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22.arf
[Fri Sep 30 01:00:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 01:00:18 2011] Updating source flux to 3.5e-15
[Fri Sep 30 01:00:34 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 01:00:35 2011] acisf12031/analysis//spectral/fullrun_ccd0_acisf12031_pi14-548_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete