[Sat Oct 22 14:37:15 2011] Detection parameters:
  Position = (840.8, 998.7) = 6 9 1.08 24 18 1.3
  Extent = 2.2" x 1.0", rotation angle = 49 degrees
  Source counts = 27.0 +/- 5.7
  Background counts = 6.0
  Rate = 0.0006 +/- 0.0001

[Sat Oct 22 14:37:15 2011] Off-axis axis estimate = 6.10'
[Sat Oct 22 14:38:37 2011] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:37 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Sat Oct 22 14:38:37 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.043
[Sat Oct 22 14:38:37 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 1.68"
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24.csv
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24_1.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24.csv
[Sat Oct 22 14:38:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:40 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Sat Oct 22 14:38:40 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Oct 22 14:38:40 2011] Fit fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Sat Oct 22 14:39:05 2011] Spatial fit model total counts = 28.143600, observed total counts = 30.000000
[Sat Oct 22 14:39:05 2011] Offset between fit and detection position for source 56 = 2.320538 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 2.320538 pixels
  Position = (839.3, 996.9) = 6 9 1.15 24 18 0.2
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 29.7 +/- 5.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Oct 22 14:39:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:05 2011] Source does appear to be extended
[Sat Oct 22 14:39:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:39:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:40 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Sat Oct 22 14:39:40 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Sat Oct 22 14:39:40 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 1.47"
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24.csv
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24_1.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24.csv
[Sat Oct 22 14:39:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Sat Oct 22 14:39:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24.csv
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Oct 22 14:39:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24.csv
[Sat Oct 22 14:39:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:40:05 2011] Spatial fit model total counts = 23.813500, observed total counts = 28.000000
[Sat Oct 22 14:40:05 2011] Offset between fit and detection position for source 56 = 1.144345 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 1.144345 pixels
  Position = (839.1, 995.8) = 6 9 1.16 24 17 59.7
  Extent = 1.2 (1.0-1.6)", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat Oct 22 14:40:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:40:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:40:05 2011] Source does appear to be extended
[Sat Oct 22 14:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:45:56 2011] Not overwriting source region fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.reg
[Sat Oct 22 14:45:56 2011] Extracting stamp from image fullrun_ccd3_acisf12030_pi14-548_cl_sm2.00.img.gz, (783, 940) - (895, 1052)
[Sat Oct 22 14:45:56 2011] Writing fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56.gif
[Sat Oct 22 14:47:01 2011] ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.evt and ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sat Oct 22 14:47:01 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.evt.gz[events] = 28 counts
[Sat Oct 22 14:47:01 2011] Mean chipx,y = (206.54, 990.04)
[Sat Oct 22 14:47:01 2011] Mean tdetx,y = (4141.96, 3267.54)
[Sat Oct 22 14:47:01 2011] chipx,y range = (190.00-224.00, 966.00-1009.00)
[Sat Oct 22 14:47:01 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 53 counts
[Sat Oct 22 14:47:01 2011] ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.img and ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_bgd.img exist, delete to re-create
[Sat Oct 22 14:47:01 2011] ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.pi and ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sat Oct 22 14:47:01 2011] Not generating rmf since there are only 26 counts
[Sat Oct 22 14:47:04 2011] ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sat Oct 22 14:48:48 2011] 172.505
[Sat Oct 22 14:49:08 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:08 2011] Error reading totcts from fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56_src.pi.gz
[Sat Oct 22 14:49:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:09 2011] Using photon index=1.80, rate=0.000541, arf fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src56.arf
[Sat Oct 22 14:49:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:09 2011] Updating source flux to 7.5e-15
[Sat Oct 22 14:49:33 2011] Source 56 has fewer than 100.000000 counts, skipping spectral fitting