[Sat Oct 22 14:37:14 2011] Detection parameters:
  Position = (336.8, 918.4) = 6 9 19.22 24 17 22.0
  Extent = 0.5" x 0.5", rotation angle = 166 degrees
  Source counts = 17.3 +/- 4.2
  Background counts = 0.7
  Rate = 0.0004 +/- 9e-05

[Sat Oct 22 14:37:15 2011] Off-axis axis estimate = 2.21'
[Sat Oct 22 14:38:37 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:37 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sat Oct 22 14:38:37 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.115
[Sat Oct 22 14:38:37 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.45"
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35.csv
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35_1.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35.csv
[Sat Oct 22 14:38:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:40 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Sat Oct 22 14:38:40 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Oct 22 14:38:40 2011] Fit fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Sat Oct 22 14:39:05 2011] Spatial fit model total counts = 29.658800, observed total counts = 30.000000
[Sat Oct 22 14:39:05 2011] Offset between fit and detection position for source 36 = 0.725260 pixels
[Sat Oct 22 14:39:05 2011] 31.139900 total counts/ 17.210400 bgd. counts: snr = 3.357686
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.725260 pixels
  Position = (336.8, 919.2) = 6 9 19.24 24 17 22.1
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 13.9 +/- 5.6
  Background counts = 17.2
  Rate = 0.0003 +/- 0.0001
[Sat Oct 22 14:39:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:05 2011] Source does appear to be extended
[Sat Oct 22 14:39:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:39:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:40 2011] Initial guess for spatial extent in simple fitting = 0.34"
[Sat Oct 22 14:39:40 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.695
[Sat Oct 22 14:39:40 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.34"
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35.csv
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35.csv
[Sat Oct 22 14:39:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Oct 22 14:39:42 2011] Fit fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Oct 22 14:40:05 2011] Spatial fit model total counts = 29.733300, observed total counts = 30.000000
[Sat Oct 22 14:40:05 2011] Offset between fit and detection position for source 36 = 0.042688 pixels
[Sat Oct 22 14:40:05 2011] 31.183800 total counts/ 17.540600 bgd. counts: snr = 3.257572
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.042688 pixels
  Position = (336.8, 919.2) = 6 9 19.24 24 17 22.1
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 13.6 +/- 5.6
  Background counts = 17.5
  Rate = 0.0003 +/- 0.0001
[Sat Oct 22 14:40:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:40:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:40:05 2011] Source does appear to be extended
[Sat Oct 22 14:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:45:56 2011] Not overwriting source region fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.reg
[Sat Oct 22 14:45:56 2011] Extracting stamp from image fullrun_ccd3_acisf12030_pi14-548_cl_sm2.00.img.gz, (323, 905) - (351, 933)
[Sat Oct 22 14:45:56 2011] Writing fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36.gif
[Sat Oct 22 14:47:30 2011] ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.evt and ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sat Oct 22 14:47:30 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.evt.gz[events] = 16 counts
[Sat Oct 22 14:47:30 2011] Mean chipx,y = (710.69, 898.69)
[Sat Oct 22 14:47:30 2011] Mean tdetx,y = (4233.31, 3771.69)
[Sat Oct 22 14:47:30 2011] chipx,y range = (697.00-727.00, 887.00-916.00)
[Sat Oct 22 14:47:30 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 14 counts
[Sat Oct 22 14:47:30 2011] ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.img and ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Sat Oct 22 14:47:30 2011] ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.pi and ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sat Oct 22 14:47:30 2011] Not generating rmf since there are only 13 counts
[Sat Oct 22 14:47:33 2011] ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sat Oct 22 14:48:49 2011] 196.061
[Sat Oct 22 14:49:08 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:08 2011] Error reading totcts from fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36_src.pi.gz
[Sat Oct 22 14:49:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:09 2011] Using photon index=1.80, rate=0.000282, arf fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src36.arf
[Sat Oct 22 14:49:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:09 2011] Updating source flux to 3.5e-15
[Sat Oct 22 14:49:33 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting