[Sat Oct 22 14:37:12 2011] Detection parameters:
  Position = (94.9, 198.7) = 6 9 27.92 24 11 27.9
  Extent = 1.8" x 0.8", rotation angle = 34 degrees
  Source counts = 46.6 +/- 7.3
  Background counts = 6.4
  Rate = 0.001 +/- 0.0002

[Sat Oct 22 14:37:15 2011] Off-axis axis estimate = 6.92'
[Sat Oct 22 14:38:37 2011] Using EEF radius (= 2.13 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:37 2011] Initial guess for spatial extent in simple fitting = 2.13"
[Sat Oct 22 14:38:37 2011] source mask rpix=4.3, npix_max = 93, mask sum = 100, frac = 1.068
[Sat Oct 22 14:38:37 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.13"
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11.csv
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct 22 14:38:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11.csv
[Sat Oct 22 14:38:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct 22 14:38:39 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct 22 14:38:39 2011] Fit fullrun_ccd3_acisf12030_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct 22 14:39:05 2011] Spatial fit model total counts = 62.007900, observed total counts = 61.000000
[Sat Oct 22 14:39:05 2011] Offset between fit and detection position for source 2 = 0.407305 pixels
[Sat Oct 22 14:39:05 2011] 62.458700 total counts/ 21.651400 bgd. counts: snr = 8.769905
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.407305 pixels
  Position = (94.6, 198.4) = 6 9 27.95 24 11 27.5
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 40.8 +/- 7.9
  Background counts = 21.7
  Rate = 0.0008 +/- 0.0002
[Sat Oct 22 14:39:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:05 2011] Source does appear to be extended
[Sat Oct 22 14:39:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:39:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:40 2011] Initial guess for spatial extent in simple fitting = 1.41"
[Sat Oct 22 14:39:40 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.087
[Sat Oct 22 14:39:40 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.41"
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11.csv
[Sat Oct 22 14:39:41 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct 22 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11.csv
[Sat Oct 22 14:39:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12030_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct 22 14:39:42 2011] fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct 22 14:39:42 2011] Fit fullrun_ccd3_acisf12030_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct 22 14:40:05 2011] Spatial fit model total counts = 49.479700, observed total counts = 50.000000
[Sat Oct 22 14:40:05 2011] Offset between fit and detection position for source 2 = 1.081622 pixels
[Sat Oct 22 14:40:05 2011] 50.107800 total counts/ 31.795700 bgd. counts: snr = 3.247536
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.081622 pixels
  Position = (95.2, 199.3) = 6 9 27.93 24 11 28.0
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 18.3 +/- 7.1
  Background counts = 31.8
  Rate = 0.0004 +/- 0.0001
[Sat Oct 22 14:40:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:40:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:40:05 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:40:05 2011] Source does appear to be extended
[Sat Oct 22 14:40:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:45:55 2011] Not overwriting source region fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 22 14:45:55 2011] Extracting stamp from image fullrun_ccd3_acisf12030_pi14-548_cl_sm2.00.img.gz, (69, 173) - (121, 225)
[Sat Oct 22 14:45:55 2011] Writing fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2.gif
[Sat Oct 22 14:46:28 2011] ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.evt and ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 22 14:46:28 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.evt.gz[events] = 27 counts
[Sat Oct 22 14:46:28 2011] Mean chipx,y = (944.15, 177.89)
[Sat Oct 22 14:46:28 2011] Mean tdetx,y = (4954.11, 4005.15)
[Sat Oct 22 14:46:28 2011] chipx,y range = (928.00-964.00, 161.00-198.00)
[Sat Oct 22 14:46:28 2011] Size of ../../acisf12030/products/events/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 21 counts
[Sat Oct 22 14:46:28 2011] ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.img and ../../acisf12030/products/images/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 22 14:46:28 2011] ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.pi and ../../acisf12030/products/spectra/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 22 14:46:28 2011] Not generating rmf since there are only 18 counts
[Sat Oct 22 14:46:31 2011] ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 22 14:48:48 2011] 179.579
[Sat Oct 22 14:49:08 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:08 2011] Error reading totcts from fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 22 14:49:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:09 2011] Using photon index=1.80, rate=0.000379, arf fullrun_ccd3_acisf12030_pi14-548_pass1_cl_src2.arf
[Sat Oct 22 14:49:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:09 2011] Updating source flux to 5.1e-15
[Sat Oct 22 14:49:33 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting