[Sat Oct 22 14:37:10 2011] Detection parameters:
  Position = (94.8, 427.9) = 6 9 27.49 24 21 51.8
  Extent = 1.0" x 0.5", rotation angle = 24 degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 1.3
  Rate = 0.0003 +/- 9e-05

[Sat Oct 22 14:37:12 2011] Off-axis axis estimate = 3.48'
[Sat Oct 22 14:38:35 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:35 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sat Oct 22 14:38:35 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.113
[Sat Oct 22 14:38:35 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.69"
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18.ximg exists
[Sat Oct 22 14:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18.csv
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Oct 22 14:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18.csv
[Sat Oct 22 14:38:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Oct 22 14:38:36 2011] Fit fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Oct 22 14:38:59 2011] Spatial fit model total counts = 18.886200, observed total counts = 19.000000
[Sat Oct 22 14:38:59 2011] Offset between fit and detection position for source 21 = 0.639521 pixels
[Sat Oct 22 14:38:59 2011] 19.188720 total counts/ 4.055920 bgd. counts: snr = 7.514059
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.639521 pixels
  Position = (95.4, 428.1) = 6 9 27.49 24 21 51.7
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 15.1 +/- 4.4
  Background counts = 4.1
  Rate = 0.0003 +/- 9e-05
[Sat Oct 22 14:38:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:38:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:38:59 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:38:59 2011] Source does appear to be extended
[Sat Oct 22 14:38:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:39:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:37 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Oct 22 14:39:37 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Sat Oct 22 14:39:37 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.76"
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18.ximg exists
[Sat Oct 22 14:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18.csv
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Oct 22 14:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18.csv
[Sat Oct 22 14:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Oct 22 14:39:40 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Oct 22 14:39:40 2011] Fit fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Oct 22 14:39:59 2011] Spatial fit model total counts = 16.656500, observed total counts = 19.000000
[Sat Oct 22 14:39:59 2011] Offset between fit and detection position for source 21 = 0.973397 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.973397 pixels
  Position = (94.5, 427.8) = 6 9 27.52 24 21 51.6
  Extent = 1.4 (1.0-1.5)" x 0.5 (0.4-0.7)", rotation angle = 351 (336-5) degrees
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Sat Oct 22 14:39:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:59 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:59 2011] Source does appear to be extended
[Sat Oct 22 14:39:59 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.44
[Sat Oct 22 14:43:44 2011] Not overwriting source region fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.reg
[Sat Oct 22 14:43:44 2011] Extracting stamp from image fullrun_ccd2_acisf12030_pi14-548_cl_sm2.00.img.gz, (33, 366) - (156, 490)
[Sat Oct 22 14:43:44 2011] Writing fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21.gif
[Sat Oct 22 14:44:40 2011] ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.evt and ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat Oct 22 14:44:40 2011] Size of ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.evt.gz[events] = 18 counts
[Sat Oct 22 14:44:40 2011] Mean chipx,y = (76.94, 625.39)
[Sat Oct 22 14:44:40 2011] Mean tdetx,y = (3686.39, 4009.06)
[Sat Oct 22 14:44:40 2011] chipx,y range = (51.00-96.00, 607.00-638.00)
[Sat Oct 22 14:44:40 2011] Size of ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 50 counts
[Sat Oct 22 14:44:40 2011] ../../acisf12030/products/images/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.img and ../../acisf12030/products/images/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat Oct 22 14:44:40 2011] ../../acisf12030/products/spectra/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.pi and ../../acisf12030/products/spectra/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat Oct 22 14:44:40 2011] Not generating rmf since there are only 18 counts
[Sat Oct 22 14:44:43 2011] ../../acisf12030/products/lightcurves/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat Oct 22 14:45:54 2011] 192.441
[Sat Oct 22 14:49:07 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:07 2011] Error reading totcts from fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21_src.pi.gz
[Sat Oct 22 14:49:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:08 2011] Using photon index=1.80, rate=0.000374, arf fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src21.arf
[Sat Oct 22 14:49:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:08 2011] Updating source flux to 4.7e-15
[Sat Oct 22 14:49:25 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting