[Sat Oct 22 14:37:10 2011] Detection parameters:
  Position = (626.8, 179.1) = 6 9 8.35 24 19 49.4
  Extent = 0.7" x 0.5", rotation angle = 135 degrees
  Source counts = 23.4 +/- 5.0
  Background counts = 1.6
  Rate = 0.0005 +/- 0.0001

[Sat Oct 22 14:37:12 2011] Off-axis axis estimate = 4.66'
[Sat Oct 22 14:38:34 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:34 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Sat Oct 22 14:38:34 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081
[Sat Oct 22 14:38:34 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.05"
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct 22 14:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13.csv
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct 22 14:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13.csv
[Sat Oct 22 14:38:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12030_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct 22 14:38:36 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct 22 14:38:36 2011] Fit fullrun_ccd2_acisf12030_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Oct 22 14:38:59 2011] Spatial fit model total counts = 26.840200, observed total counts = 27.000000
[Sat Oct 22 14:38:59 2011] Offset between fit and detection position for source 12 = 0.716111 pixels
[Sat Oct 22 14:38:59 2011] 27.210740 total counts/ 5.392540 bgd. counts: snr = 9.395550
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.716111 pixels
  Position = (627.3, 179.6) = 6 9 8.34 24 19 49.4
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 21.8 +/- 5.2
  Background counts = 5.4
  Rate = 0.0005 +/- 0.0001
[Sat Oct 22 14:38:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:38:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:38:59 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:38:59 2011] Source does appear to be extended
[Sat Oct 22 14:38:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:39:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:37 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sat Oct 22 14:39:37 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.687
[Sat Oct 22 14:39:37 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.64"
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct 22 14:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13.csv
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct 22 14:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13.csv
[Sat Oct 22 14:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12030_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct 22 14:39:39 2011] fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct 22 14:39:39 2011] Fit fullrun_ccd2_acisf12030_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Oct 22 14:39:59 2011] Spatial fit model total counts = 26.814300, observed total counts = 27.000000
[Sat Oct 22 14:39:59 2011] Offset between fit and detection position for source 12 = 0.004311 pixels
[Sat Oct 22 14:39:59 2011] 27.189690 total counts/ 5.260290 bgd. counts: snr = 9.561409
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.004311 pixels
  Position = (627.3, 179.6) = 6 9 8.34 24 19 49.4
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 21.9 +/- 5.2
  Background counts = 5.3
  Rate = 0.0005 +/- 0.0001
[Sat Oct 22 14:39:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:59 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:59 2011] Source does appear to be extended
[Sat Oct 22 14:39:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:43:43 2011] Not overwriting source region fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.reg
[Sat Oct 22 14:43:43 2011] Extracting stamp from image fullrun_ccd2_acisf12030_pi14-548_cl_sm2.00.img.gz, (597, 150) - (657, 210)
[Sat Oct 22 14:43:43 2011] Writing fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12.gif
[Sat Oct 22 14:44:26 2011] ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.evt and ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Oct 22 14:44:26 2011] Size of ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.evt.gz[events] = 23 counts
[Sat Oct 22 14:44:26 2011] Mean chipx,y = (606.91, 859.04)
[Sat Oct 22 14:44:26 2011] Mean tdetx,y = (3920.04, 3479.09)
[Sat Oct 22 14:44:26 2011] chipx,y range = (596.00-628.00, 847.00-880.00)
[Sat Oct 22 14:44:26 2011] Size of ../../acisf12030/products/events/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 20 counts
[Sat Oct 22 14:44:26 2011] ../../acisf12030/products/images/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.img and ../../acisf12030/products/images/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Oct 22 14:44:26 2011] ../../acisf12030/products/spectra/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.pi and ../../acisf12030/products/spectra/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Oct 22 14:44:26 2011] Not generating rmf since there are only 21 counts
[Sat Oct 22 14:44:28 2011] ../../acisf12030/products/lightcurves/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Oct 22 14:45:54 2011] 178.884
[Sat Oct 22 14:49:07 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:07 2011] Error reading totcts from fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Oct 22 14:49:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:08 2011] Using photon index=1.80, rate=0.000454, arf fullrun_ccd2_acisf12030_pi14-548_pass1_cl_src12.arf
[Sat Oct 22 14:49:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:08 2011] Updating source flux to 6.1e-15
[Sat Oct 22 14:49:25 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting