[Sat Oct 22 14:37:07 2011] Detection parameters:
  Position = (838.3, 449.2) = 6 9 38.77 24 13 34.6
  Extent = 0.7" x 0.5", rotation angle = 39 degrees
  Source counts = 25.9 +/- 5.2
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Sat Oct 22 14:37:09 2011] Off-axis axis estimate = 5.42'
[Sat Oct 22 14:38:33 2011] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:33 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Sat Oct 22 14:38:33 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Sat Oct 22 14:38:33 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.36"
[Sat Oct 22 14:38:34 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8.ximg exists
[Sat Oct 22 14:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 14:38:34 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Oct 22 14:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 14:38:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12030_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:34 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Oct 22 14:38:34 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Oct 22 14:38:34 2011] Fit fullrun_ccd1_acisf12030_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Oct 22 14:38:55 2011] Spatial fit model total counts = 33.526000, observed total counts = 39.000000
[Sat Oct 22 14:38:55 2011] Offset between fit and detection position for source 5 = 0.208637 pixels
[Sat Oct 22 14:38:55 2011] 33.609660 total counts/ 2.915560 bgd. counts: snr = 17.976035
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.208637 pixels
  Position = (838.2, 449.4) = 6 9 38.79 24 13 34.4
  Extent = 1.3 (0.9-1.7)" x 0.6 (0.5-0.7)", rotation angle = 324 (309-339) degrees
  Source counts = 30.7 +/- 5.8
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0001
[Sat Oct 22 14:38:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:38:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:38:55 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:38:55 2011] Source does appear to be extended
[Sat Oct 22 14:38:55 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sat Oct 22 14:39:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:35 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Oct 22 14:39:35 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Sat Oct 22 14:39:35 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.92"
[Sat Oct 22 14:39:36 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8.ximg exists
[Sat Oct 22 14:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8.csv
[Sat Oct 22 14:39:36 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Oct 22 14:39:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8.csv
[Sat Oct 22 14:39:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12030_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:36 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Oct 22 14:39:36 2011] fullrun_ccd1_acisf12030_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Oct 22 14:39:36 2011] Fit fullrun_ccd1_acisf12030_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Oct 22 14:39:55 2011] Spatial fit model total counts = 33.238000, observed total counts = 37.000000
[Sat Oct 22 14:39:55 2011] Offset between fit and detection position for source 5 = 0.172801 pixels
[Sat Oct 22 14:39:55 2011] 32.542210 total counts/ 1.676910 bgd. counts: snr = 23.835026
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.172801 pixels
  Position = (838.3, 449.5) = 6 9 38.79 24 13 34.5
  Extent = 1.2 (0.8-1.5)" x 0.5 (0.4-0.7)", rotation angle = 326 (311-337) degrees
  Source counts = 30.9 +/- 5.7
  Background counts = 1.7
  Rate = 0.0006 +/- 0.0001
[Sat Oct 22 14:39:55 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:55 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:55 2011] Source does appear to be extended
[Sat Oct 22 14:39:55 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Sat Oct 22 14:41:45 2011] Not overwriting source region fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 22 14:41:45 2011] Extracting stamp from image fullrun_ccd1_acisf12030_pi14-548_cl_sm2.00.img.gz, (782, 393) - (895, 506)
[Sat Oct 22 14:41:45 2011] Writing fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5.gif
[Sat Oct 22 14:42:12 2011] ../../acisf12030/products/events/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.evt and ../../acisf12030/products/events/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 22 14:42:14 2011] Size of ../../acisf12030/products/events/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.evt.gz[events] = 30 counts
[Sat Oct 22 14:42:14 2011] Mean chipx,y = (206.07, 434.00)
[Sat Oct 22 14:42:14 2011] Mean tdetx,y = (4698.00, 4313.07)
[Sat Oct 22 14:42:14 2011] chipx,y range = (181.00-223.00, 416.00-455.00)
[Sat Oct 22 14:42:14 2011] Size of ../../acisf12030/products/events/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 35 counts
[Sat Oct 22 14:42:14 2011] ../../acisf12030/products/images/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.img and ../../acisf12030/products/images/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 22 14:42:14 2011] ../../acisf12030/products/spectra/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.pi and ../../acisf12030/products/spectra/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 22 14:42:14 2011] Not generating rmf since there are only 30 counts
[Sat Oct 22 14:42:17 2011] ../../acisf12030/products/lightcurves/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 22 14:43:41 2011] 184.862
[Sat Oct 22 14:49:06 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:06 2011] Error reading totcts from fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 22 14:49:07 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:07 2011] Using photon index=1.80, rate=0.000639, arf fullrun_ccd1_acisf12030_pi14-548_pass1_cl_src5.arf
[Sat Oct 22 14:49:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:07 2011] Updating source flux to 8.3e-15
[Sat Oct 22 14:49:20 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting