[Sat Oct 22 14:37:05 2011] Detection parameters:
  Position = (230.9, 126.8) = 6 10 0.07 24 19 30.9
  Extent = 1.1" x 1.0", rotation angle = 117 degrees
  Source counts = 29.5 +/- 6.0
  Background counts = 6.5
  Rate = 0.0006 +/- 0.0001

[Sat Oct 22 14:37:07 2011] Off-axis axis estimate = 7.43'
[Sat Oct 22 14:38:31 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:38:31 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Sat Oct 22 14:38:31 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.007
[Sat Oct 22 14:38:31 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.45"
[Sat Oct 22 14:38:32 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 22 14:38:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5.csv
[Sat Oct 22 14:38:32 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 22 14:38:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5.csv
[Sat Oct 22 14:38:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12030_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:38:33 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 22 14:38:33 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 22 14:38:33 2011] Fit fullrun_ccd0_acisf12030_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Oct 22 14:38:52 2011] Spatial fit model total counts = 64.432700, observed total counts = 65.000000
[Sat Oct 22 14:38:52 2011] Offset between fit and detection position for source 5 = 3.822480 pixels
[Sat Oct 22 14:38:52 2011] 60.444800 total counts/ 15.507000 bgd. counts: snr = 11.411636
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.822480 pixels
  Position = (234.6, 125.9) = 6 9 59.95 24 19 30.2
  Extent = 2.4 (1.6-3.5)", rotation angle = 0
  Source counts = 44.9 +/- 7.8
  Background counts = 15.5
  Rate = 0.0009 +/- 0.0002
[Sat Oct 22 14:38:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:38:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:38:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:38:52 2011] Source does appear to be extended
[Sat Oct 22 14:38:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:38:52 2011] Source is confused with source 6
[Sat Oct 22 14:39:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 14:39:34 2011] Initial guess for spatial extent in simple fitting = 2.41"
[Sat Oct 22 14:39:34 2011] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.944
[Sat Oct 22 14:39:34 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.41"
[Sat Oct 22 14:39:34 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 22 14:39:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5.csv
[Sat Oct 22 14:39:34 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 22 14:39:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5.csv
[Sat Oct 22 14:39:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12030_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 14:39:35 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 22 14:39:35 2011] fullrun_ccd0_acisf12030_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 22 14:39:35 2011] Fit fullrun_ccd0_acisf12030_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 22 14:39:52 2011] Spatial fit model total counts = 63.602100, observed total counts = 65.000000
[Sat Oct 22 14:39:52 2011] Offset between fit and detection position for source 5 = 1.212542 pixels
[Sat Oct 22 14:39:52 2011] 63.142500 total counts/ 1.099700 bgd. counts: snr = 59.163557
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.212542 pixels
  Position = (235.6, 126.6) = 6 9 59.92 24 19 30.5
  Extent = 2.7 (2.0-3.0)", rotation angle = 0
  Source counts = 62.0 +/- 7.9
  Background counts = 1.1
  Rate = 0.001 +/- 0.0002
[Sat Oct 22 14:39:52 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 14:39:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 14:39:52 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 14:39:52 2011] Source does appear to be extended
[Sat Oct 22 14:39:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:40:34 2011] Not overwriting source region fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.reg
[Sat Oct 22 14:40:34 2011] Extracting stamp from image fullrun_ccd0_acisf12030_pi14-548_cl_sm2.00.img.gz, (112, 3) - (359, 250)
[Sat Oct 22 14:40:34 2011] Writing fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5.gif
[Sat Oct 22 14:40:48 2011] ../../acisf12030/products/events/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.evt and ../../acisf12030/products/events/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct 22 14:40:48 2011] Size of ../../acisf12030/products/events/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.evt.gz[events] = 73 counts
[Sat Oct 22 14:40:48 2011] Mean chipx,y = (223.92, 918.21)
[Sat Oct 22 14:40:48 2011] Mean tdetx,y = (3979.21, 4908.08)
[Sat Oct 22 14:40:48 2011] chipx,y range = (194.00-255.00, 895.00-942.00)
[Sat Oct 22 14:40:48 2011] Size of ../../acisf12030/products/events/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 214 counts
[Sat Oct 22 14:40:48 2011] ../../acisf12030/products/images/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.img and ../../acisf12030/products/images/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct 22 14:40:48 2011] ../../acisf12030/products/spectra/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.pi and ../../acisf12030/products/spectra/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct 22 14:40:48 2011] Not generating rmf since there are only 62 counts
[Sat Oct 22 14:40:52 2011] ../../acisf12030/products/lightcurves/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.lc and ../../acisf12030/products/lightcurves/fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct 22 14:41:44 2011] 171.578
[Sat Oct 22 14:49:06 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:49:06 2011] Error reading totcts from fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct 22 14:49:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 14:49:06 2011] Using photon index=1.80, rate=0.00128, arf fullrun_ccd0_acisf12030_pi14-548_pass1_cl_src5.arf
[Sat Oct 22 14:49:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 14:49:06 2011] Updating source flux to 1.8e-14
[Sat Oct 22 14:49:16 2011] Flag c found in src. 5 procflags, skipping spectral fitting
[Sat Oct 22 14:49:16 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting