[Fri Oct 14 21:22:56 2011] Detection parameters:
  Position = (63.1, 533.5) = 3 19 48.16 41 30 42.0
  Extent = 1.9" x 1.3", rotation angle = 143 degrees
  Source counts = 19357.2 +/- 153.9
  Background counts = 4333.8
  Rate = 1 +/- 0.009

[Fri Oct 14 21:22:57 2011] Off-axis axis estimate = 7.56'
[Fri Oct 14 21:25:49 2011] Using EEF radius (= 2.53 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:25:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:25:49 2011] Initial guess for spatial extent in simple fitting = 2.53"
[Fri Oct 14 21:25:49 2011] source mask rpix=5.2, npix_max = 127, mask sum = 132, frac = 1.033
[Fri Oct 14 21:25:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.53"
[Fri Oct 14 21:25:49 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 21:25:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 21:25:49 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 21:25:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 21:25:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12025_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:25:49 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 21:25:49 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 21:25:49 2011] Fit fullrun_ccd2_acisf12025_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 21:25:57 2011] Spatial fit model total counts = 24941.600000, observed total counts = 24903.000000
[Fri Oct 14 21:25:57 2011] Offset between fit and detection position for source 21 = 0.781696 pixels
[Fri Oct 14 21:25:57 2011] 24982.660000 total counts/ 4987.360000 bgd. counts: snr = 283.134353
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.781696 pixels
  Position = (63.4, 534.3) = 3 19 48.17 41 30 42.1
  Extent = 2.8 (2.8-2.8)", rotation angle = 0
  Source counts = 19995.3 +/- 158.1
  Background counts = 4987.4
  Rate = 1 +/- 0.009
[Fri Oct 14 21:25:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:25:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:25:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:25:57 2011] Source does appear to be extended
[Fri Oct 14 21:25:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:26:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 21:26:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 21:26:14 2011] Initial guess for spatial extent in simple fitting = 2.81"
[Fri Oct 14 21:26:14 2011] source mask rpix=5.7, npix_max = 154, mask sum = 156, frac = 1.009
[Fri Oct 14 21:26:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.81"
[Fri Oct 14 21:26:15 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 21:26:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 21:26:15 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 21:26:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 21:26:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12025_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 21:26:15 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 21:26:15 2011] fullrun_ccd2_acisf12025_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 21:26:15 2011] Fit fullrun_ccd2_acisf12025_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 21:26:21 2011] Spatial fit model total counts = 25871.100000, observed total counts = 25808.000000
[Fri Oct 14 21:26:21 2011] Offset between fit and detection position for source 21 = 0.045006 pixels
[Fri Oct 14 21:26:21 2011] 25910.270000 total counts/ 6045.970000 bgd. counts: snr = 255.470214
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.045006 pixels
  Position = (63.4, 534.3) = 3 19 48.17 41 30 42.1
  Extent = 2.7 (2.7-2.8)", rotation angle = 0
  Source counts = 19864.3 +/- 161.0
  Background counts = 6046.0
  Rate = 1 +/- 0.009
[Fri Oct 14 21:26:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 21:26:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 21:26:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 21:26:21 2011] Source does appear to be extended
[Fri Oct 14 21:26:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 21:27:10 2011] Not overwriting source region fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.reg
[Fri Oct 14 21:27:10 2011] Extracting stamp from image fullrun_ccd2_acisf12025_pi14-548_cl_sm2.00.img.gz, (0, 409) - (189, 660)
[Fri Oct 14 21:27:10 2011] Writing fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21.gif
[Fri Oct 14 21:27:10 2011] ../../acisf12025/products/events/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.evt and ../../acisf12025/products/events/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri Oct 14 21:27:10 2011] Size of ../../acisf12025/products/events/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.evt.gz[events] = 24499 counts
[Fri Oct 14 21:27:10 2011] Mean chipx,y = (995.06, 989.23)
[Fri Oct 14 21:27:10 2011] Mean tdetx,y = (4050.23, 3090.94)
[Fri Oct 14 21:27:10 2011] chipx,y range = (956.00-1023.00, 952.00-1023.00)
[Fri Oct 14 21:27:10 2011] Size of ../../acisf12025/products/events/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 11034 counts
[Fri Oct 14 21:27:10 2011] ../../acisf12025/products/images/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.img and ../../acisf12025/products/images/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri Oct 14 21:27:10 2011] ../../acisf12025/products/spectra/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.pi and ../../acisf12025/products/spectra/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri Oct 14 21:27:13 2011] ../../acisf12025/products/lightcurves/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.lc and ../../acisf12025/products/lightcurves/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri Oct 14 21:27:20 2011] Keeping rmf generated by specextract
[Fri Oct 14 21:27:20 2011] 161.47
[Fri Oct 14 21:27:45 2011] Updating aperture counts using extracted products
[Fri Oct 14 21:27:45 2011] Error reading totcts from fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_src.pi.gz
[Fri Oct 14 21:27:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 21:27:45 2011] Using photon index=1.80, rate=1.11, arf fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21.arf
[Fri Oct 14 21:27:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 21:27:45 2011] Updating source flux to 1.5e-11
[Fri Oct 14 21:28:01 2011] Reading fit data from acisf12025/analysis//spectral/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_pl.csv
[Fri Oct 14 21:28:01 2011] Spectral fit parameter nH value = 3.21374e+21
[Fri Oct 14 21:28:01 2011] Spectral fit parameter PhoIndex value = 1.79321
[Fri Oct 14 21:28:01 2011] Failed to get F(0.3-8.0) from acisf12025/analysis//spectral/fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 21:28:01 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 21:28:01 2011] Using Nh = 3.2e+21, photon index=1.79, rate=1.11, arf fullrun_ccd2_acisf12025_pi14-548_pass1_cl_src21.arf
[Fri Oct 14 21:28:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 21:28:01 2011] Updating source flux to 1.6e-11