[Wed Oct 26 07:31:55 2011] Detection parameters:
  Position = (1024.7, 885.0) = 11 42 29.96 50 58 9.1
  Extent = 1.0" x 0.5", rotation angle = 96 degrees
  Source counts = 11.7 +/- 3.6
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0002

[Wed Oct 26 07:31:55 2011] Off-axis axis estimate = 4.06'
[Wed Oct 26 07:32:40 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:32:40 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Oct 26 07:32:40 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Wed Oct 26 07:32:40 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.85"
[Wed Oct 26 07:32:40 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10.ximg exists
[Wed Oct 26 07:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 07:32:40 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Oct 26 07:32:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10.csv
[Wed Oct 26 07:32:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12024_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:32:40 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Oct 26 07:32:40 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Oct 26 07:32:40 2011] Fit fullrun_ccd7_acisf12024_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Oct 26 07:32:47 2011] Spatial fit model total counts = 13.577600, observed total counts = 14.000000
[Wed Oct 26 07:32:47 2011] Offset between fit and detection position for source 14 = 0.735113 pixels
[Wed Oct 26 07:32:47 2011] 13.460350 total counts/ 2.566450 bgd. counts: snr = 6.800126
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.735113 pixels
  Position = (1025.4, 884.7) = 11 42 29.95 50 58 8.7
  Extent = 0.8 (0.4-1.4)", rotation angle = 0
  Source counts = 10.9 +/- 3.7
  Background counts = 2.6
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 07:32:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:32:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:32:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 07:32:47 2011] Source does appear to be extended
[Wed Oct 26 07:32:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 07:33:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:33:05 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Wed Oct 26 07:33:05 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.120
[Wed Oct 26 07:33:05 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.79"
[Wed Oct 26 07:33:05 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10.ximg exists
[Wed Oct 26 07:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 07:33:05 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Oct 26 07:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10.csv
[Wed Oct 26 07:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12024_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:33:06 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Oct 26 07:33:06 2011] fullrun_ccd7_acisf12024_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Oct 26 07:33:06 2011] Fit fullrun_ccd7_acisf12024_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Oct 26 07:33:11 2011] Spatial fit model total counts = 12.385600, observed total counts = 13.000000
[Wed Oct 26 07:33:11 2011] Offset between fit and detection position for source 14 = 0.275578 pixels
[Wed Oct 26 07:33:11 2011] 12.760440 total counts/ 1.707740 bgd. counts: snr = 8.457802
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.275578 pixels
  Position = (1025.3, 884.5) = 11 42 29.96 50 58 8.6
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 11.1 +/- 3.6
  Background counts = 1.7
  Rate = 0.0006 +/- 0.0002
[Wed Oct 26 07:33:11 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:33:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:33:11 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 07:33:11 2011] Source does appear to be extended
[Wed Oct 26 07:33:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 07:34:33 2011] Not overwriting source region fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.reg
[Wed Oct 26 07:34:33 2011] Extracting stamp from image fullrun_ccd7_acisf12024_pi14-548_cl_sm2.00.img.gz, (993, 852) - (1058, 917)
[Wed Oct 26 07:34:33 2011] Writing fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14.gif
[Wed Oct 26 07:34:59 2011] ../../acisf12024/products/events/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.evt and ../../acisf12024/products/events/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Oct 26 07:34:59 2011] Size of ../../acisf12024/products/events/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.evt.gz[events] = 12 counts
[Wed Oct 26 07:34:59 2011] Mean chipx,y = (534.00, 143.00)
[Wed Oct 26 07:34:59 2011] Mean tdetx,y = (4451.00, 1845.00)
[Wed Oct 26 07:34:59 2011] chipx,y range = (520.00-554.00, 127.00-161.00)
[Wed Oct 26 07:34:59 2011] Size of ../../acisf12024/products/events/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 13 counts
[Wed Oct 26 07:34:59 2011] ../../acisf12024/products/images/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.img and ../../acisf12024/products/images/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Oct 26 07:34:59 2011] ../../acisf12024/products/spectra/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.pi and ../../acisf12024/products/spectra/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Oct 26 07:34:59 2011] Not generating rmf since there are only 11 counts
[Wed Oct 26 07:35:02 2011] ../../acisf12024/products/lightcurves/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.lc and ../../acisf12024/products/lightcurves/fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Oct 26 07:35:11 2011] 221.263
[Wed Oct 26 07:35:14 2011] Updating aperture counts using extracted products
[Wed Oct 26 07:35:14 2011] Error reading totcts from fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Oct 26 07:35:14 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 07:35:14 2011] Using photon index=1.80, rate=0.000556, arf fullrun_ccd7_acisf12024_pi14-548_pass1_cl_src14.arf
[Wed Oct 26 07:35:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 07:35:14 2011] Updating source flux to 4.5e-15
[Wed Oct 26 07:35:26 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting