[Fri Oct  7 19:18:21 2011] Detection parameters:
  Position = (40.1, 985.6) = 6 12 55.04 17 59 30.7
  Extent = 0.7" x 0.5", rotation angle = 13 degrees
  Source counts = 61.2 +/- 8.1
  Background counts = 3.8
  Rate = 0.002 +/- 0.0002

[Fri Oct  7 19:18:25 2011] Off-axis axis estimate = 0.50'
[Fri Oct  7 19:19:49 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:19:49 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct  7 19:19:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.890
[Fri Oct  7 19:19:49 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.39"
[Fri Oct  7 19:19:50 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 19:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 19:19:50 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 19:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7.csv
[Fri Oct  7 19:19:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12022_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:19:51 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 19:19:51 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 19:19:51 2011] Fit fullrun_ccd3_acisf12022_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct  7 19:20:12 2011] Spatial fit model total counts = 66.232500, observed total counts = 67.000000
[Fri Oct  7 19:20:12 2011] Offset between fit and detection position for source 5 = 0.876512 pixels
[Fri Oct  7 19:20:12 2011] 66.809500 total counts/ 13.927500 bgd. counts: snr = 14.170047
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.876512 pixels
  Position = (40.4, 986.5) = 6 12 55.05 17 59 30.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 52.9 +/- 8.2
  Background counts = 13.9
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 19:20:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:20:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:20:12 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:20:12 2011] Source does appear to be extended
[Fri Oct  7 19:20:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:20:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:20:43 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct  7 19:20:43 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.253
[Fri Oct  7 19:20:43 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.41"
[Fri Oct  7 19:20:45 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 19:20:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 19:20:45 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 19:20:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 19:20:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12022_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:20:45 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 19:20:45 2011] fullrun_ccd3_acisf12022_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 19:20:45 2011] Fit fullrun_ccd3_acisf12022_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct  7 19:21:04 2011] Spatial fit model total counts = 67.732700, observed total counts = 67.000000
[Fri Oct  7 19:21:04 2011] Offset between fit and detection position for source 5 = 0.005279 pixels
[Fri Oct  7 19:21:04 2011] 68.309200 total counts/ 14.230400 bgd. counts: snr = 14.335686
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.005279 pixels
  Position = (40.4, 986.5) = 6 12 55.05 17 59 30.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 54.1 +/- 8.3
  Background counts = 14.2
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 19:21:04 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:21:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:21:04 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:21:04 2011] Source does appear to be extended
[Fri Oct  7 19:21:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:27:12 2011] Not overwriting source region fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.reg
[Fri Oct  7 19:27:12 2011] Extracting stamp from image fullrun_ccd3_acisf12022_pi14-548_cl_sm2.00.img.gz, (22, 968) - (59, 1005)
[Fri Oct  7 19:27:12 2011] Writing fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5.gif
[Fri Oct  7 19:27:41 2011] ../../acisf12022/products/events/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.evt and ../../acisf12022/products/events/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct  7 19:27:41 2011] Size of ../../acisf12022/products/events/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.evt.gz[events] = 55 counts
[Fri Oct  7 19:27:41 2011] Mean chipx,y = (999.64, 987.16)
[Fri Oct  7 19:27:41 2011] Mean tdetx,y = (4144.84, 4060.64)
[Fri Oct  7 19:27:41 2011] chipx,y range = (981.00-1016.00, 970.00-1004.00)
[Fri Oct  7 19:27:41 2011] Size of ../../acisf12022/products/events/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 15 counts
[Fri Oct  7 19:27:41 2011] ../../acisf12022/products/images/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.img and ../../acisf12022/products/images/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct  7 19:27:41 2011] ../../acisf12022/products/spectra/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.pi and ../../acisf12022/products/spectra/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct  7 19:27:41 2011] Not generating rmf since there are only 54 counts
[Fri Oct  7 19:27:43 2011] ../../acisf12022/products/lightcurves/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.lc and ../../acisf12022/products/lightcurves/fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct  7 19:30:46 2011] 203.99
[Fri Oct  7 19:31:05 2011] Updating aperture counts using extracted products
[Fri Oct  7 19:31:05 2011] Error reading totcts from fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct  7 19:31:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 19:31:06 2011] Using photon index=1.80, rate=0.0016, arf fullrun_ccd3_acisf12022_pi14-548_pass1_cl_src5.arf
[Fri Oct  7 19:31:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 19:31:06 2011] Updating source flux to 2e-14
[Fri Oct  7 19:31:23 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting