[Fri Oct  7 14:16:21 2011] Detection parameters:
  Position = (179.6, 277.4) = 2 20 3.18 57 1 40.4
  Extent = 5.1" x 1.8", rotation angle = 134 degrees
  Source counts = 41.4 +/- 8.3
  Background counts = 27.6
  Rate = 0.0008 +/- 0.0002

[Fri Oct  7 14:16:24 2011] Off-axis axis estimate = 10.17'
[Fri Oct  7 14:17:51 2011] Using EEF radius (= 4.59 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:17:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 14:17:51 2011] Initial guess for spatial extent in simple fitting = 4.59"
[Fri Oct  7 14:17:51 2011] source mask rpix=9.3, npix_max = 386, mask sum = 361, frac = 0.935
[Fri Oct  7 14:17:51 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 4.59"
[Fri Oct  7 14:17:52 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct  7 14:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 14:17:52 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct  7 14:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10.csv
[Fri Oct  7 14:17:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:17:53 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct  7 14:17:53 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct  7 14:17:53 2011] Fit fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct  7 14:18:29 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 52.728435 pixels away
[Fri Oct  7 14:18:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:18:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:18:30 2011] Assessing source extent using major
[Fri Oct  7 14:18:30 2011] Source does appear to be extended
[Fri Oct  7 14:18:30 2011] Computing asymmetry using major and minor axis, asym = 2.79
[Fri Oct  7 14:18:30 2011] Source is asymmetric
[Fri Oct  7 14:19:09 2011] Using EEF radius (= 4.59 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:19:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 14:19:09 2011] Initial guess for spatial extent in simple fitting = 4.59"
[Fri Oct  7 14:19:09 2011] source mask rpix=9.3, npix_max = 386, mask sum = 361, frac = 0.935
[Fri Oct  7 14:19:09 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 4.59"
[Fri Oct  7 14:19:10 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct  7 14:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 14:19:10 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct  7 14:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10.csv
[Fri Oct  7 14:19:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:19:17 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 14:19:17 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 14:19:17 2011] Fit fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 14:19:50 2011] Spatial fit model total counts = 118.169000, observed total counts = 117.000000
[Fri Oct  7 14:19:50 2011] Offset between fit and detection position for source 42 = 7.069493 pixels
[Fri Oct  7 14:19:50 2011] 118.754900 total counts/ 68.334300 bgd. counts: snr = 6.099421
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 7.069493 pixels
  Position = (173.3, 280.6) = 2 20 3.60 57 1 41.7
  Extent = 4.9 (1.1-9.2)", rotation angle = 0
  Source counts = 50.4 +/- 10.9
  Background counts = 68.3
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 14:19:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:19:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:19:50 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:19:50 2011] Source does appear to be extended
[Fri Oct  7 14:19:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:31:38 2011] Not overwriting source region fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.reg
[Fri Oct  7 14:31:38 2011] Extracting stamp from image fullrun_ccd3_acisf12021_pi14-548_cl_sm2.00.img.gz, (0, 59) - (395, 502)
[Fri Oct  7 14:31:38 2011] Writing fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42.gif
[Fri Oct  7 14:32:10 2011] ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.evt and ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Fri Oct  7 14:32:10 2011] Size of ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.evt.gz[events] = 151 counts
[Fri Oct  7 14:32:10 2011] Mean chipx,y = (52.78, 160.79)
[Fri Oct  7 14:32:10 2011] Mean tdetx,y = (4971.21, 3113.78)
[Fri Oct  7 14:32:10 2011] chipx,y range = (6.00-107.00, 103.00-211.00)
[Fri Oct  7 14:32:10 2011] Size of ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 672 counts
[Fri Oct  7 14:32:10 2011] ../../acisf12021/products/images/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.img and ../../acisf12021/products/images/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Fri Oct  7 14:32:10 2011] ../../acisf12021/products/spectra/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.pi and ../../acisf12021/products/spectra/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Fri Oct  7 14:32:10 2011] Not generating rmf since there are only 50 counts
[Fri Oct  7 14:32:13 2011] ../../acisf12021/products/lightcurves/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.lc and ../../acisf12021/products/lightcurves/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Fri Oct  7 14:36:34 2011] 154.23
[Fri Oct  7 14:36:53 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:36:53 2011] Error reading totcts from fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42_src.pi.gz
[Fri Oct  7 14:36:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:36:55 2011] Using photon index=1.80, rate=0.00098, arf fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src42.arf
[Fri Oct  7 14:36:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:36:55 2011] Updating source flux to 1.5e-14
[Fri Oct  7 14:37:26 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting