[Fri Oct  7 14:16:18 2011] Detection parameters:
  Position = (514.7, 808.6) = 2 19 43.08 57 6 2.3
  Extent = 1.7" x 1.2", rotation angle = 113 degrees
  Source counts = 101.6 +/- 10.6
  Background counts = 11.4
  Rate = 0.002 +/- 0.0002

[Fri Oct  7 14:16:24 2011] Off-axis axis estimate = 6.03'
[Fri Oct  7 14:17:51 2011] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:17:51 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Fri Oct  7 14:17:51 2011] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.947
[Fri Oct  7 14:17:51 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.65"
[Fri Oct  7 14:17:52 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct  7 14:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 14:17:52 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct  7 14:17:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 14:17:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12021_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:17:53 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct  7 14:17:53 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct  7 14:17:53 2011] Fit fullrun_ccd3_acisf12021_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct  7 14:18:29 2011] Spatial fit model total counts = 111.465000, observed total counts = 112.000000
[Fri Oct  7 14:18:29 2011] Offset between fit and detection position for source 1 = 0.879545 pixels
[Fri Oct  7 14:18:29 2011] 113.467400 total counts/ 34.577200 bgd. counts: snr = 13.416157
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.879545 pixels
  Position = (515.2, 807.9) = 2 19 43.07 57 6 1.7
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 78.9 +/- 10.7
  Background counts = 34.6
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 14:18:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:18:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:18:30 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:18:30 2011] Source does appear to be extended
[Fri Oct  7 14:18:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:19:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:19:09 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Oct  7 14:19:09 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Fri Oct  7 14:19:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.17"
[Fri Oct  7 14:19:10 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct  7 14:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 14:19:10 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct  7 14:19:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 14:19:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12021_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:19:17 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct  7 14:19:17 2011] fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct  7 14:19:17 2011] Fit fullrun_ccd3_acisf12021_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct  7 14:19:50 2011] Spatial fit model total counts = 103.209000, observed total counts = 104.000000
[Fri Oct  7 14:19:50 2011] Offset between fit and detection position for source 1 = 0.156501 pixels
[Fri Oct  7 14:19:50 2011] 105.363200 total counts/ 33.356500 bgd. counts: snr = 12.467595
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156501 pixels
  Position = (515.1, 807.9) = 2 19 43.08 57 6 1.7
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 72.0 +/- 10.3
  Background counts = 33.4
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 14:19:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:19:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:19:50 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:19:50 2011] Source does appear to be extended
[Fri Oct  7 14:19:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:31:38 2011] Not overwriting source region fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 14:31:38 2011] Extracting stamp from image fullrun_ccd3_acisf12021_pi14-548_cl_sm2.00.img.gz, (465, 758) - (565, 857)
[Fri Oct  7 14:31:38 2011] Writing fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 14:31:48 2011] ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.evt and ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 14:31:48 2011] Size of ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.evt.gz[events] = 101 counts
[Fri Oct  7 14:31:48 2011] Mean chipx,y = (654.94, 352.23)
[Fri Oct  7 14:31:48 2011] Mean tdetx,y = (4779.77, 3715.94)
[Fri Oct  7 14:31:48 2011] chipx,y range = (633.00-676.00, 332.00-376.00)
[Fri Oct  7 14:31:48 2011] Size of ../../acisf12021/products/events/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 59 counts
[Fri Oct  7 14:31:48 2011] ../../acisf12021/products/images/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.img and ../../acisf12021/products/images/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 14:31:48 2011] ../../acisf12021/products/spectra/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.pi and ../../acisf12021/products/spectra/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 14:31:48 2011] Not generating rmf since there are only 72 counts
[Fri Oct  7 14:31:51 2011] ../../acisf12021/products/lightcurves/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.lc and ../../acisf12021/products/lightcurves/fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 14:36:34 2011] 171.207
[Fri Oct  7 14:36:53 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:36:53 2011] Error reading totcts from fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 14:36:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:36:55 2011] Using photon index=1.80, rate=0.0014, arf fullrun_ccd3_acisf12021_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 14:36:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:36:55 2011] Updating source flux to 2e-14
[Fri Oct  7 14:37:26 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting