[Fri Oct  7 14:16:18 2011] Detection parameters:
  Position = (849.9, 205.4) = 2 18 22.14 56 58 52.3
  Extent = 2.4" x 1.5", rotation angle = 133 degrees
  Source counts = 13.9 +/- 5.0
  Background counts = 11.1
  Rate = 0.0003 +/- 0.0001

[Fri Oct  7 14:16:18 2011] Off-axis axis estimate = 9.51'
[Fri Oct  7 14:17:48 2011] Using EEF radius (= 4.00 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:17:48 2011] Initial guess for spatial extent in simple fitting = 4.00"
[Fri Oct  7 14:17:48 2011] source mask rpix=8.1, npix_max = 298, mask sum = 289, frac = 0.969
[Fri Oct  7 14:17:48 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 4.00"
[Fri Oct  7 14:17:50 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30.ximg exists
[Fri Oct  7 14:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30.csv
[Fri Oct  7 14:17:50 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30_1.ximg exists
[Fri Oct  7 14:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30.csv
[Fri Oct  7 14:17:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:17:51 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Fri Oct  7 14:17:51 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Oct  7 14:17:51 2011] Fit fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Oct  7 14:18:21 2011] Spatial fit model total counts = 57.694900, observed total counts = 57.000000
[Fri Oct  7 14:18:21 2011] Offset between fit and detection position for source 60 = 1.617798 pixels
[Fri Oct  7 14:18:21 2011] 57.485800 total counts/ 47.087100 bgd. counts: snr = 1.515403
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 1.617798 pixels
  Position = (849.6, 207.0) = 2 18 22.19 56 58 52.8
  Extent = 1.0" x 1.0", rotation angle = 0
  Source counts = 10.4 +/- 7.6
  Background counts = 47.1
  Rate = 0.0002 +/- 0.0001
  Deleting source due to low Poisson probability