[Fri Oct  7 14:16:15 2011] Detection parameters:
  Position = (295.9, 826.2) = 2 18 55.48 57 3 58.1
  Extent = 0.6" x 0.5", rotation angle = 132 degrees
  Source counts = 29.1 +/- 5.6
  Background counts = 1.9
  Rate = 0.0006 +/- 0.0001

[Fri Oct  7 14:16:18 2011] Off-axis axis estimate = 3.02'
[Fri Oct  7 14:17:48 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:17:48 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct  7 14:17:48 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.408
[Fri Oct  7 14:17:48 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.58"
[Fri Oct  7 14:17:50 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct  7 14:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 14:17:50 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct  7 14:17:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13.csv
[Fri Oct  7 14:17:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12021_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:17:51 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct  7 14:17:51 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct  7 14:17:51 2011] Fit fullrun_ccd2_acisf12021_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct  7 14:18:21 2011] Spatial fit model total counts = 35.777900, observed total counts = 36.000000
[Fri Oct  7 14:18:21 2011] Offset between fit and detection position for source 13 = 0.788734 pixels
[Fri Oct  7 14:18:21 2011] 35.848420 total counts/ 6.877220 bgd. counts: snr = 11.047399
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.788734 pixels
  Position = (296.5, 826.7) = 2 18 55.47 57 3 58.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 29.0 +/- 6.0
  Background counts = 6.9
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 14:18:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:18:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:18:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:18:21 2011] Source does appear to be extended
[Fri Oct  7 14:18:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:19:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:19:07 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Oct  7 14:19:07 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.731
[Fri Oct  7 14:19:07 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.62"
[Fri Oct  7 14:19:08 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct  7 14:19:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13.csv
[Fri Oct  7 14:19:08 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct  7 14:19:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13.csv
[Fri Oct  7 14:19:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12021_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:19:08 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct  7 14:19:08 2011] fullrun_ccd2_acisf12021_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct  7 14:19:08 2011] Fit fullrun_ccd2_acisf12021_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct  7 14:19:42 2011] Spatial fit model total counts = 35.815800, observed total counts = 36.000000
[Fri Oct  7 14:19:42 2011] Offset between fit and detection position for source 13 = 0.006341 pixels
[Fri Oct  7 14:19:42 2011] 35.885590 total counts/ 6.889890 bgd. counts: snr = 11.046570
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.006341 pixels
  Position = (296.5, 826.7) = 2 18 55.48 57 3 58.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 29.0 +/- 6.0
  Background counts = 6.9
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 14:19:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:19:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:19:42 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:19:42 2011] Source does appear to be extended
[Fri Oct  7 14:19:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:28:42 2011] Not overwriting source region fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.reg
[Fri Oct  7 14:28:42 2011] Extracting stamp from image fullrun_ccd2_acisf12021_pi14-548_cl_sm2.00.img.gz, (268, 798) - (325, 855)
[Fri Oct  7 14:28:42 2011] Writing fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13.gif
[Fri Oct  7 14:29:23 2011] ../../acisf12021/products/events/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.evt and ../../acisf12021/products/events/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Oct  7 14:29:23 2011] Size of ../../acisf12021/products/events/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.evt.gz[events] = 31 counts
[Fri Oct  7 14:29:23 2011] Mean chipx,y = (409.10, 888.16)
[Fri Oct  7 14:29:23 2011] Mean tdetx,y = (3949.16, 3676.90)
[Fri Oct  7 14:29:23 2011] chipx,y range = (392.00-426.00, 872.00-904.00)
[Fri Oct  7 14:29:23 2011] Size of ../../acisf12021/products/events/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 20 counts
[Fri Oct  7 14:29:23 2011] ../../acisf12021/products/images/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.img and ../../acisf12021/products/images/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Oct  7 14:29:23 2011] ../../acisf12021/products/spectra/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.pi and ../../acisf12021/products/spectra/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Oct  7 14:29:23 2011] Not generating rmf since there are only 28 counts
[Fri Oct  7 14:29:26 2011] ../../acisf12021/products/lightcurves/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.lc and ../../acisf12021/products/lightcurves/fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Oct  7 14:31:37 2011] 190.137
[Fri Oct  7 14:36:52 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:36:52 2011] Error reading totcts from fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Oct  7 14:36:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:36:53 2011] Using photon index=1.80, rate=0.000564, arf fullrun_ccd2_acisf12021_pi14-548_pass1_cl_src13.arf
[Fri Oct  7 14:36:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:36:53 2011] Updating source flux to 7.1e-15
[Fri Oct  7 14:37:12 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting