[Fri Oct  7 14:16:09 2011] Detection parameters:
  Position = (245.8, 405.7) = 2 19 43.10 57 10 54.6
  Extent = 2.1" x 1.2", rotation angle = 81 degrees
  Source counts = 57.7 +/- 8.2
  Background counts = 10.3
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 14:16:13 2011] Off-axis axis estimate = 7.16'
[Fri Oct  7 14:17:45 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:17:45 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Fri Oct  7 14:17:45 2011] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.951
[Fri Oct  7 14:17:45 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 2.28"
[Fri Oct  7 14:17:46 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 14:17:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 14:17:46 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 14:17:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6.csv
[Fri Oct  7 14:17:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12021_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:17:46 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 14:17:46 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 14:17:46 2011] Fit fullrun_ccd1_acisf12021_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 14:18:16 2011] Spatial fit model total counts = 74.837700, observed total counts = 75.000000
[Fri Oct  7 14:18:16 2011] Offset between fit and detection position for source 4 = 1.619052 pixels
[Fri Oct  7 14:18:16 2011] 74.807100 total counts/ 27.127700 bgd. counts: snr = 9.154282
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.619052 pixels
  Position = (245.7, 407.3) = 2 19 43.14 57 10 55.1
  Extent = 1.6 (1.2-2.4)", rotation angle = 0
  Source counts = 47.7 +/- 8.6
  Background counts = 27.1
  Rate = 0.0009 +/- 0.0002
[Fri Oct  7 14:18:16 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:18:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:18:16 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:18:16 2011] Source does appear to be extended
[Fri Oct  7 14:18:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:19:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 14:19:04 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Fri Oct  7 14:19:04 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Fri Oct  7 14:19:04 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.56"
[Fri Oct  7 14:19:05 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 14:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 14:19:05 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 14:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 14:19:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12021_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 14:19:06 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 14:19:06 2011] fullrun_ccd1_acisf12021_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 14:19:06 2011] Fit fullrun_ccd1_acisf12021_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 14:19:37 2011] Spatial fit model total counts = 59.173700, observed total counts = 60.000000
[Fri Oct  7 14:19:37 2011] Offset between fit and detection position for source 4 = 0.787797 pixels
[Fri Oct  7 14:19:37 2011] 59.655460 total counts/ 9.046560 bgd. counts: snr = 16.826166
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.787797 pixels
  Position = (245.6, 406.5) = 2 19 43.15 57 10 54.7
  Extent = 1.7 (1.1-2.3)", rotation angle = 0
  Source counts = 50.6 +/- 7.7
  Background counts = 9.0
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 14:19:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 14:19:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 14:19:37 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 14:19:37 2011] Source does appear to be extended
[Fri Oct  7 14:19:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 14:23:58 2011] Not overwriting source region fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.reg
[Fri Oct  7 14:23:58 2011] Extracting stamp from image fullrun_ccd1_acisf12021_pi14-548_cl_sm2.00.img.gz, (170, 330) - (322, 483)
[Fri Oct  7 14:23:58 2011] Writing fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4.gif
[Fri Oct  7 14:24:22 2011] ../../acisf12021/products/events/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.evt and ../../acisf12021/products/events/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct  7 14:24:22 2011] Size of ../../acisf12021/products/events/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.evt.gz[events] = 68 counts
[Fri Oct  7 14:24:22 2011] Mean chipx,y = (181.82, 196.71)
[Fri Oct  7 14:24:22 2011] Mean tdetx,y = (4935.29, 4288.82)
[Fri Oct  7 14:24:22 2011] chipx,y range = (161.00-203.00, 170.00-218.00)
[Fri Oct  7 14:24:22 2011] Size of ../../acisf12021/products/events/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 130 counts
[Fri Oct  7 14:24:22 2011] ../../acisf12021/products/images/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.img and ../../acisf12021/products/images/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct  7 14:24:22 2011] ../../acisf12021/products/spectra/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.pi and ../../acisf12021/products/spectra/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct  7 14:24:22 2011] Not generating rmf since there are only 50 counts
[Fri Oct  7 14:24:26 2011] ../../acisf12021/products/lightcurves/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.lc and ../../acisf12021/products/lightcurves/fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct  7 14:28:39 2011] 173.528
[Fri Oct  7 14:36:50 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:36:50 2011] Error reading totcts from fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct  7 14:36:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:36:51 2011] Using photon index=1.80, rate=0.000984, arf fullrun_ccd1_acisf12021_pi14-548_pass1_cl_src4.arf
[Fri Oct  7 14:36:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 14:36:51 2011] Updating source flux to 1.4e-14
[Fri Oct  7 14:37:08 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting