[Sun Sep 25 19:44:25 2011] Detection parameters:
  Position = (786.8, 575.4) = 2 54 34.07 41 31 10.7
  Extent = 1.0" x 0.7", rotation angle = 159 degrees
  Source counts = 876.7 +/- 30.2
  Background counts = 33.3
  Rate = 0.03 +/- 0.001

[Sun Sep 25 19:44:25 2011] Off-axis axis estimate = 4.83'
[Sun Sep 25 19:45:56 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:45:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 19:45:56 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Sun Sep 25 19:45:56 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.981
[Sun Sep 25 19:45:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.11"
[Sun Sep 25 19:45:56 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 19:45:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 19:45:56 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 19:45:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 19:45:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12018_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:45:56 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 19:45:56 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 19:45:56 2011] Fit fullrun_ccd3_acisf12018_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 19:46:03 2011] Spatial fit model total counts = 911.186000, observed total counts = 910.000000
[Sun Sep 25 19:46:03 2011] Offset between fit and detection position for source 13 = 0.697582 pixels
[Sun Sep 25 19:46:03 2011] 915.921000 total counts/ 115.347000 bgd. counts: snr = 74.541535
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.697582 pixels
  Position = (787.4, 575.7) = 2 54 34.06 41 31 10.6
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 800.6 +/- 30.3
  Background counts = 115.3
  Rate = 0.03 +/- 0.001
[Sun Sep 25 19:46:03 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:46:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:46:03 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:46:03 2011] Source does appear to be extended
[Sun Sep 25 19:46:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:46:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:46:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 19:46:17 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Sun Sep 25 19:46:17 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.235
[Sun Sep 25 19:46:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.86"
[Sun Sep 25 19:46:17 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 19:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 19:46:17 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 19:46:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 19:46:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12018_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:46:17 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 19:46:17 2011] fullrun_ccd3_acisf12018_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 19:46:17 2011] Fit fullrun_ccd3_acisf12018_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 19:46:24 2011] Spatial fit model total counts = 899.447000, observed total counts = 899.000000
[Sun Sep 25 19:46:24 2011] Offset between fit and detection position for source 13 = 0.030429 pixels
[Sun Sep 25 19:46:24 2011] 906.541000 total counts/ 120.305000 bgd. counts: snr = 71.682161
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.030429 pixels
  Position = (787.4, 575.6) = 2 54 34.07 41 31 10.6
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 786.2 +/- 30.1
  Background counts = 120.3
  Rate = 0.03 +/- 0.001
[Sun Sep 25 19:46:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:46:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:46:24 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:46:24 2011] Source does appear to be extended
[Sun Sep 25 19:46:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:48:17 2011] Not overwriting source region fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.reg
[Sun Sep 25 19:48:17 2011] Extracting stamp from image fullrun_ccd3_acisf12018_pi14-548_cl_sm2.00.img.gz, (749, 537) - (826, 614)
[Sun Sep 25 19:48:17 2011] Writing fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13.gif
[Sun Sep 25 19:48:18 2011] ../../acisf12018/products/events/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.evt and ../../acisf12018/products/events/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Sep 25 19:48:18 2011] Size of ../../acisf12018/products/events/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.evt.gz[events] = 865 counts
[Sun Sep 25 19:48:18 2011] Mean chipx,y = (460.75, 694.87)
[Sun Sep 25 19:48:18 2011] Mean tdetx,y = (4437.13, 3521.75)
[Sun Sep 25 19:48:18 2011] chipx,y range = (442.00-482.00, 672.00-716.00)
[Sun Sep 25 19:48:18 2011] Size of ../../acisf12018/products/events/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 178 counts
[Sun Sep 25 19:48:18 2011] ../../acisf12018/products/images/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.img and ../../acisf12018/products/images/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Sep 25 19:48:18 2011] ../../acisf12018/products/spectra/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.pi and ../../acisf12018/products/spectra/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Sep 25 19:48:21 2011] ../../acisf12018/products/lightcurves/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.lc and ../../acisf12018/products/lightcurves/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Sep 25 19:48:49 2011] Keeping rmf generated by specextract
[Sun Sep 25 19:48:49 2011] 178.13
[Sun Sep 25 19:48:52 2011] Updating aperture counts using extracted products
[Sun Sep 25 19:48:52 2011] Error reading totcts from fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Sep 25 19:48:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:48:52 2011] Using photon index=1.80, rate=0.0293, arf fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13.arf
[Sun Sep 25 19:48:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:48:52 2011] Updating source flux to 3.7e-13
[Sun Sep 25 19:49:12 2011] Reading fit data from acisf12018/analysis//spectral/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_pl.csv
[Sun Sep 25 19:49:12 2011] Spectral fit parameter nH value = 2.96942e+21
[Sun Sep 25 19:49:12 2011] Spectral fit parameter PhoIndex value = 1.49927
[Sun Sep 25 19:49:12 2011] Failed to get F(0.3-8.0) from acisf12018/analysis//spectral/fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 19:49:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:49:12 2011] Using Nh = 3e+21, photon index=1.50, rate=0.0293, arf fullrun_ccd3_acisf12018_pi14-548_pass1_cl_src13.arf
[Sun Sep 25 19:49:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:49:12 2011] Updating source flux to 4.4e-13