[Sun Sep 25 19:44:23 2011] Detection parameters:
  Position = (657.0, 713.1) = 2 54 47.31 41 40 43.7
  Extent = 1.9" x 1.3", rotation angle = 89 degrees
  Source counts = 125.2 +/- 12.3
  Background counts = 26.8
  Rate = 0.005 +/- 0.0005

[Sun Sep 25 19:44:23 2011] Off-axis axis estimate = 6.78'
[Sun Sep 25 19:45:54 2011] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:45:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 19:45:54 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Sun Sep 25 19:45:54 2011] source mask rpix=4.2, npix_max = 87, mask sum = 100, frac = 1.148
[Sun Sep 25 19:45:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.05"
[Sun Sep 25 19:45:55 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 19:45:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 19:45:55 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 19:45:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 19:45:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12018_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:45:55 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 19:45:55 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 19:45:55 2011] Fit fullrun_ccd1_acisf12018_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 19:46:00 2011] Spatial fit model total counts = 176.978000, observed total counts = 177.000000
[Sun Sep 25 19:46:00 2011] Offset between fit and detection position for source 3 = 0.707487 pixels
[Sun Sep 25 19:46:00 2011] 177.541300 total counts/ 60.378300 bgd. counts: snr = 15.078219
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.707487 pixels
  Position = (657.7, 713.2) = 2 54 47.30 41 40 43.4
  Extent = 1.6 (1.4-1.9)", rotation angle = 0
  Source counts = 117.2 +/- 13.3
  Background counts = 60.4
  Rate = 0.004 +/- 0.0005
[Sun Sep 25 19:46:00 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:46:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:46:00 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:46:00 2011] Source does appear to be extended
[Sun Sep 25 19:46:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:46:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 19:46:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 19:46:14 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Sun Sep 25 19:46:14 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.972
[Sun Sep 25 19:46:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.62"
[Sun Sep 25 19:46:14 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 19:46:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 19:46:14 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 19:46:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 19:46:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12018_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 19:46:16 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 19:46:16 2011] fullrun_ccd1_acisf12018_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 19:46:16 2011] Fit fullrun_ccd1_acisf12018_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 19:46:22 2011] Spatial fit model total counts = 154.999000, observed total counts = 155.000000
[Sun Sep 25 19:46:22 2011] Offset between fit and detection position for source 3 = 0.229606 pixels
[Sun Sep 25 19:46:22 2011] 155.657600 total counts/ 40.831600 bgd. counts: snr = 17.969750
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.229606 pixels
  Position = (657.7, 713.0) = 2 54 47.29 41 40 43.3
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 114.8 +/- 12.5
  Background counts = 40.8
  Rate = 0.004 +/- 0.0005
[Sun Sep 25 19:46:22 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 19:46:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 19:46:22 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 19:46:22 2011] Source does appear to be extended
[Sun Sep 25 19:46:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:47:01 2011] Not overwriting source region fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.reg
[Sun Sep 25 19:47:01 2011] Extracting stamp from image fullrun_ccd1_acisf12018_pi14-548_cl_sm2.00.img.gz, (586, 641) - (730, 785)
[Sun Sep 25 19:47:01 2011] Writing fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3.gif
[Sun Sep 25 19:47:02 2011] ../../acisf12018/products/events/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.evt and ../../acisf12018/products/events/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Sep 25 19:47:02 2011] Size of ../../acisf12018/products/events/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.evt.gz[events] = 145 counts
[Sun Sep 25 19:47:02 2011] Mean chipx,y = (618.08, 595.71)
[Sun Sep 25 19:47:02 2011] Mean tdetx,y = (4536.29, 4725.08)
[Sun Sep 25 19:47:02 2011] chipx,y range = (594.00-640.00, 576.00-617.00)
[Sun Sep 25 19:47:02 2011] Size of ../../acisf12018/products/events/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 310 counts
[Sun Sep 25 19:47:02 2011] ../../acisf12018/products/images/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.img and ../../acisf12018/products/images/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Sep 25 19:47:02 2011] ../../acisf12018/products/spectra/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.pi and ../../acisf12018/products/spectra/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Sep 25 19:47:07 2011] ../../acisf12018/products/lightcurves/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.lc and ../../acisf12018/products/lightcurves/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Sep 25 19:47:34 2011] Keeping rmf generated by specextract
[Sun Sep 25 19:47:34 2011] 182.778
[Sun Sep 25 19:48:52 2011] Updating aperture counts using extracted products
[Sun Sep 25 19:48:52 2011] Error reading totcts from fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Sep 25 19:48:52 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:48:52 2011] Using photon index=1.80, rate=0.00428, arf fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 19:48:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:48:52 2011] Updating source flux to 5.3e-14
[Sun Sep 25 19:49:00 2011] Reading fit data from acisf12018/analysis//spectral/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_pl.csv
[Sun Sep 25 19:49:00 2011] Spectral fit parameter nH value = 3.52069e+13
[Sun Sep 25 19:49:00 2011] Spectral fit parameter PhoIndex value = 1.55222
[Sun Sep 25 19:49:00 2011] Failed to get F(0.3-8.0) from acisf12018/analysis//spectral/fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 19:49:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 19:49:00 2011] Using Nh = 3.5e+13, photon index=1.55, rate=0.00428, arf fullrun_ccd1_acisf12018_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 19:49:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 19:49:00 2011] Updating source flux to 6e-14