[Thu Oct 27 07:05:54 2011] Detection parameters:
  Position = (641.6, 712.6) = 2 54 47.28 41 40 43.0
  Extent = 1.7" x 1.5", rotation angle = 88 degrees
  Source counts = 127.3 +/- 12.4
  Background counts = 26.7
  Rate = 0.006 +/- 0.0006

[Thu Oct 27 07:05:55 2011] Off-axis axis estimate = 6.77'
[Thu Oct 27 07:07:21 2011] Using EEF radius (= 2.04 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:07:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:07:21 2011] Initial guess for spatial extent in simple fitting = 2.04"
[Thu Oct 27 07:07:21 2011] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.936
[Thu Oct 27 07:07:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.04"
[Thu Oct 27 07:07:21 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 07:07:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:07:22 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 07:07:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:07:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12016_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:07:22 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 07:07:22 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:07:22 2011] Fit fullrun_ccd1_acisf12016_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:07:27 2011] Spatial fit model total counts = 184.224000, observed total counts = 185.000000
[Thu Oct 27 07:07:27 2011] Offset between fit and detection position for source 2 = 0.896308 pixels
[Thu Oct 27 07:07:27 2011] 184.747000 total counts/ 69.993000 bgd. counts: snr = 13.716412
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.896308 pixels
  Position = (642.0, 713.4) = 2 54 47.29 41 40 43.1
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 114.8 +/- 13.6
  Background counts = 70.0
  Rate = 0.005 +/- 0.0006
[Thu Oct 27 07:07:27 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:07:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:07:27 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:07:27 2011] Source does appear to be extended
[Thu Oct 27 07:07:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:07:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:07:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:07:40 2011] Initial guess for spatial extent in simple fitting = 1.51"
[Thu Oct 27 07:07:40 2011] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.102
[Thu Oct 27 07:07:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.51"
[Thu Oct 27 07:07:41 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 07:07:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:07:41 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 07:07:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:07:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12016_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:07:41 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 07:07:41 2011] fullrun_ccd1_acisf12016_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:07:41 2011] Fit fullrun_ccd1_acisf12016_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:07:51 2011] Spatial fit model total counts = 154.526000, observed total counts = 156.000000
[Thu Oct 27 07:07:51 2011] Offset between fit and detection position for source 2 = 0.206308 pixels
[Thu Oct 27 07:07:51 2011] 154.549400 total counts/ 42.543400 bgd. counts: snr = 17.172170
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.206308 pixels
  Position = (641.9, 713.6) = 2 54 47.29 41 40 43.2
  Extent = 1.5 (1.2-1.7)", rotation angle = 0
  Source counts = 112.0 +/- 12.4
  Background counts = 42.5
  Rate = 0.005 +/- 0.0006
[Thu Oct 27 07:07:51 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:07:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:07:51 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:07:51 2011] Source does appear to be extended
[Thu Oct 27 07:07:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:08:11 2011] Not overwriting source region fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 27 07:08:11 2011] Extracting stamp from image fullrun_ccd1_acisf12016_pi14-548_cl_sm2.00.img.gz, (574, 646) - (710, 782)
[Thu Oct 27 07:08:11 2011] Writing fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2.gif
[Thu Oct 27 07:08:12 2011] ../../acisf12016/products/events/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.evt and ../../acisf12016/products/events/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 27 07:08:12 2011] Size of ../../acisf12016/products/events/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.evt.gz[events] = 146 counts
[Thu Oct 27 07:08:12 2011] Mean chipx,y = (613.45, 594.58)
[Thu Oct 27 07:08:12 2011] Mean tdetx,y = (4537.42, 4720.45)
[Thu Oct 27 07:08:12 2011] chipx,y range = (592.00-639.00, 573.00-616.00)
[Thu Oct 27 07:08:12 2011] Size of ../../acisf12016/products/events/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 267 counts
[Thu Oct 27 07:08:12 2011] ../../acisf12016/products/images/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.img and ../../acisf12016/products/images/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 27 07:08:12 2011] ../../acisf12016/products/spectra/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.pi and ../../acisf12016/products/spectra/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct 27 07:08:15 2011] ../../acisf12016/products/lightcurves/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.lc and ../../acisf12016/products/lightcurves/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 27 07:08:31 2011] Keeping rmf generated by specextract
[Thu Oct 27 07:08:31 2011] 178.338
[Thu Oct 27 07:09:28 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:09:28 2011] Error reading totcts from fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 27 07:09:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:09:28 2011] Using photon index=1.80, rate=0.00502, arf fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2.arf
[Thu Oct 27 07:09:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:09:28 2011] Updating source flux to 6.3e-14
[Thu Oct 27 07:09:38 2011] Reading fit data from acisf12016/analysis//spectral/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_pl.csv
[Thu Oct 27 07:09:38 2011] Spectral fit parameter nH value = 1.01537e+15
[Thu Oct 27 07:09:38 2011] Spectral fit parameter PhoIndex value = 1.26587
[Thu Oct 27 07:09:38 2011] Failed to get F(0.3-8.0) from acisf12016/analysis//spectral/fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 07:09:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:09:38 2011] Using Nh = 1e+15, photon index=1.27, rate=0.00502, arf fullrun_ccd1_acisf12016_pi14-548_pass1_cl_src2.arf
[Thu Oct 27 07:09:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:09:38 2011] Updating source flux to 7.8e-14