[Tue Sep 27 23:53:24 2011] Detection parameters:
  Position = (702.0, 763.1) = 23 42 31.94 -54 17 48.3
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 18.9 +/- 4.5
  Background counts = 1.1
  Rate = 0.0003 +/- 8e-05

[Tue Sep 27 23:53:26 2011] Off-axis axis estimate = 3.48'
[Tue Sep 27 23:54:29 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:54:29 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Tue Sep 27 23:54:29 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.109
[Tue Sep 27 23:54:29 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.69"
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14.csv
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14.csv
[Tue Sep 27 23:54:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:54:30 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Sep 27 23:54:30 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Sep 27 23:54:30 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Sep 27 23:54:43 2011] Spatial fit model total counts = 20.611600, observed total counts = 21.000000
[Tue Sep 27 23:54:43 2011] Offset between fit and detection position for source 4 = 0.695483 pixels
[Tue Sep 27 23:54:43 2011] 20.406740 total counts/ 1.336340 bgd. counts: snr = 16.496861
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.695483 pixels
  Position = (702.2, 763.8) = 23 42 31.95 -54 17 48.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.1 +/- 4.5
  Background counts = 1.3
  Rate = 0.0004 +/- 8e-05
[Tue Sep 27 23:54:43 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:54:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:54:43 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:54:43 2011] Source does appear to be extended
[Tue Sep 27 23:54:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:55:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:55:07 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Tue Sep 27 23:55:07 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.149
[Tue Sep 27 23:55:07 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.44"
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13.ximg exists
[Tue Sep 27 23:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13.csv
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Sep 27 23:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13.csv
[Tue Sep 27 23:55:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Sep 27 23:55:08 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Sep 27 23:55:19 2011] Spatial fit model total counts = 19.559100, observed total counts = 21.000000
[Tue Sep 27 23:55:19 2011] Offset between fit and detection position for source 4 = 0.033870 pixels
[Tue Sep 27 23:55:19 2011] 19.205510 total counts/ 0.185510 bgd. counts: snr = 44.159775
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.033870 pixels
  Position = (702.3, 763.8) = 23 42 31.95 -54 17 48.2
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 19.0 +/- 4.4
  Background counts = 0.2
  Rate = 0.0004 +/- 8e-05
[Tue Sep 27 23:55:19 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:55:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:55:19 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:55:19 2011] Source does appear to be extended
[Tue Sep 27 23:55:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:56:45 2011] Not overwriting source region fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.reg
[Tue Sep 27 23:56:45 2011] Extracting stamp from image fullrun_ccd2_acisf12014_pi14-548_cl_sm2.00.img.gz, (682, 743) - (723, 784)
[Tue Sep 27 23:56:45 2011] Writing fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4.gif
[Tue Sep 27 23:57:29 2011] ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.evt and ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Sep 27 23:57:29 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.evt.gz[events] = 19 counts
[Tue Sep 27 23:57:29 2011] Mean chipx,y = (402.21, 624.68)
[Tue Sep 27 23:57:29 2011] Mean tdetx,y = (3685.68, 3683.79)
[Tue Sep 27 23:57:29 2011] chipx,y range = (388.00-420.00, 604.00-639.00)
[Tue Sep 27 23:57:29 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 7 counts
[Tue Sep 27 23:57:29 2011] ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.img and ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Sep 27 23:57:29 2011] ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.pi and ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Sep 27 23:57:29 2011] Not generating rmf since there are only 19 counts
[Tue Sep 27 23:57:32 2011] ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.lc and ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Sep 27 23:57:57 2011] 191.21
[Wed Sep 28 00:00:04 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:00:04 2011] Error reading totcts from fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 28 00:00:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:05 2011] Using photon index=1.80, rate=0.00035, arf fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 00:00:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:05 2011] Updating source flux to 4.3e-15
[Wed Sep 28 00:00:25 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting