[Tue Sep 27 23:53:24 2011] Detection parameters:
  Position = (499.3, 652.3) = 23 42 43.33 -54 18 42.8
  Extent = 0.5" x 0.5", rotation angle = 153 degrees
  Source counts = 16.2 +/- 4.1
  Background counts = 0.8
  Rate = 0.0003 +/- 8e-05

[Tue Sep 27 23:53:26 2011] Off-axis axis estimate = 4.33'
[Tue Sep 27 23:54:29 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:54:29 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Tue Sep 27 23:54:29 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.867
[Tue Sep 27 23:54:29 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.94"
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17.csv
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17_1.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17.csv
[Tue Sep 27 23:54:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:54:30 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Tue Sep 27 23:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17.csv
[Tue Sep 27 23:54:31 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Sep 27 23:54:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17.csv
[Tue Sep 27 23:54:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:54:43 2011] Spatial fit model total counts = 24.496400, observed total counts = 27.000000
[Tue Sep 27 23:54:43 2011] Offset between fit and detection position for source 3 = 0.121175 pixels
[Tue Sep 27 23:54:43 2011] 24.801020 total counts/ 3.094220 bgd. counts: snr = 12.340144
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.121175 pixels
  Position = (499.2, 652.3) = 23 42 43.36 -54 18 43.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 21.7 +/- 5.0
  Background counts = 3.1
  Rate = 0.0004 +/- 9e-05
[Tue Sep 27 23:54:43 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:54:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:54:43 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:54:43 2011] Source does appear to be extended
[Tue Sep 27 23:54:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:55:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:55:07 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Sep 27 23:55:07 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.796
[Tue Sep 27 23:55:07 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.71"
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src16.ximg exists
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src16_1.ximg exists
[Tue Sep 27 23:55:08 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src16 appears to have run properly
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Sep 27 23:55:08 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Sep 27 23:55:19 2011] Spatial fit model total counts = 26.407400, observed total counts = 27.000000
[Tue Sep 27 23:55:19 2011] Offset between fit and detection position for source 3 = 0.036885 pixels
[Tue Sep 27 23:55:19 2011] 26.679230 total counts/ 3.648730 bgd. counts: snr = 12.056812
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.036885 pixels
  Position = (499.2, 652.3) = 23 42 43.36 -54 18 43.0
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 23.0 +/- 5.2
  Background counts = 3.6
  Rate = 0.0004 +/- 0.0001
[Tue Sep 27 23:55:19 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:55:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:55:19 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:55:19 2011] Source does appear to be extended
[Tue Sep 27 23:55:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:56:45 2011] Not overwriting source region fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.reg
[Tue Sep 27 23:56:45 2011] Extracting stamp from image fullrun_ccd2_acisf12014_pi14-548_cl_sm2.00.img.gz, (469, 622) - (530, 683)
[Tue Sep 27 23:56:45 2011] Writing fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3.gif
[Tue Sep 27 23:57:38 2011] ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.evt and ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Sep 27 23:57:38 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.evt.gz[events] = 25 counts
[Tue Sep 27 23:57:38 2011] Mean chipx,y = (627.68, 568.96)
[Tue Sep 27 23:57:38 2011] Mean tdetx,y = (3629.96, 3458.32)
[Tue Sep 27 23:57:38 2011] chipx,y range = (614.00-647.00, 553.00-585.00)
[Tue Sep 27 23:57:38 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Tue Sep 27 23:57:38 2011] ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.img and ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Sep 27 23:57:38 2011] ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.pi and ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Sep 27 23:57:38 2011] Not generating rmf since there are only 23 counts
[Tue Sep 27 23:57:41 2011] ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.lc and ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Sep 27 23:57:57 2011] 180.839
[Wed Sep 28 00:00:04 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:00:04 2011] Error reading totcts from fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 00:00:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:05 2011] Using photon index=1.80, rate=0.000424, arf fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 00:00:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:05 2011] Updating source flux to 5.6e-15
[Wed Sep 28 00:00:25 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting