[Tue Sep 27 23:53:24 2011] Detection parameters:
  Position = (214.8, 543.5) = 23 42 59.33 -54 19 36.2
  Extent = 1.9" x 1.1", rotation angle = 131 degrees
  Source counts = 170.4 +/- 13.5
  Background counts = 12.6
  Rate = 0.003 +/- 0.0002

[Tue Sep 27 23:53:26 2011] Off-axis axis estimate = 6.01'
[Tue Sep 27 23:54:29 2011] Using EEF radius (= 1.63 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:54:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 23:54:29 2011] Initial guess for spatial extent in simple fitting = 1.63"
[Tue Sep 27 23:54:29 2011] source mask rpix=3.3, npix_max = 58, mask sum = 53, frac = 0.907
[Tue Sep 27 23:54:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.63"
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 23:54:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 23:54:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 23:54:29 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 23:54:29 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 23:54:43 2011] Spatial fit model total counts = 188.860000, observed total counts = 186.000000
[Tue Sep 27 23:54:43 2011] Offset between fit and detection position for source 1 = 0.371857 pixels
[Tue Sep 27 23:54:43 2011] 190.589800 total counts/ 29.595800 bgd. counts: snr = 29.593385
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.371857 pixels
  Position = (215.1, 543.8) = 23 42 59.34 -54 19 36.3
  Extent = 1.3 (1.2-1.5)", rotation angle = 0
  Source counts = 161.0 +/- 13.8
  Background counts = 29.6
  Rate = 0.003 +/- 0.0003
[Tue Sep 27 23:54:43 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:54:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:54:43 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:54:43 2011] Source does appear to be extended
[Tue Sep 27 23:54:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:55:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:55:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 23:55:07 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Tue Sep 27 23:55:07 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Tue Sep 27 23:55:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.32"
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 23:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 23:55:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 23:55:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12014_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 23:55:08 2011] fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 23:55:08 2011] Fit fullrun_ccd2_acisf12014_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 23:55:19 2011] Spatial fit model total counts = 180.654000, observed total counts = 178.000000
[Tue Sep 27 23:55:19 2011] Offset between fit and detection position for source 1 = 0.028224 pixels
[Tue Sep 27 23:55:19 2011] 182.313700 total counts/ 29.034700 bgd. counts: snr = 28.446182
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028224 pixels
  Position = (215.1, 543.8) = 23 42 59.34 -54 19 36.3
  Extent = 1.2 (1.1-1.5)", rotation angle = 0
  Source counts = 153.3 +/- 13.5
  Background counts = 29.0
  Rate = 0.003 +/- 0.0002
[Tue Sep 27 23:55:19 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:55:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:55:19 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:55:19 2011] Source does appear to be extended
[Tue Sep 27 23:55:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:56:45 2011] Not overwriting source region fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 23:56:45 2011] Extracting stamp from image fullrun_ccd2_acisf12014_pi14-548_cl_sm2.00.img.gz, (158, 487) - (272, 601)
[Tue Sep 27 23:56:45 2011] Writing fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 23:56:50 2011] ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.evt and ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 23:56:50 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.evt.gz[events] = 175 counts
[Tue Sep 27 23:56:50 2011] Mean chipx,y = (933.85, 540.43)
[Tue Sep 27 23:56:50 2011] Mean tdetx,y = (3601.43, 3152.15)
[Tue Sep 27 23:56:50 2011] chipx,y range = (909.00-956.00, 519.00-565.00)
[Tue Sep 27 23:56:50 2011] Size of ../../acisf12014/products/events/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 51 counts
[Tue Sep 27 23:56:50 2011] ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.img and ../../acisf12014/products/images/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 23:56:50 2011] ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.pi and ../../acisf12014/products/spectra/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 23:56:55 2011] ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.lc and ../../acisf12014/products/lightcurves/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 23:57:57 2011] Keeping rmf generated by specextract
[Tue Sep 27 23:57:57 2011] 170.059
[Wed Sep 28 00:00:04 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:00:04 2011] Error reading totcts from fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 00:00:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:04 2011] Using photon index=1.80, rate=0.00282, arf fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:00:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:04 2011] Updating source flux to 4.1e-14
[Wed Sep 28 00:00:32 2011] Reading fit data from acisf12014/analysis//spectral/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 00:00:32 2011] Spectral fit parameter nH value = 4.61205e+15
[Wed Sep 28 00:00:32 2011] Spectral fit parameter PhoIndex value = 1.64017
[Wed Sep 28 00:00:32 2011] Failed to get F(0.3-8.0) from acisf12014/analysis//spectral/fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 00:00:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:32 2011] Using Nh = 4.6e+15, photon index=1.64, rate=0.00282, arf fullrun_ccd2_acisf12014_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:00:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:32 2011] Updating source flux to 4.2e-14