[Tue Sep 27 23:53:21 2011] Detection parameters:
  Position = (530.3, 556.3) = 23 41 45.28 -54 17 9.6
  Extent = 1.7" x 1.4", rotation angle = 0 degrees
  Source counts = 98.9 +/- 10.7
  Background counts = 16.1
  Rate = 0.002 +/- 0.0002

[Tue Sep 27 23:53:21 2011] Off-axis axis estimate = 8.19'
[Tue Sep 27 23:54:27 2011] Using EEF radius (= 2.97 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:54:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 23:54:27 2011] Initial guess for spatial extent in simple fitting = 2.97"
[Tue Sep 27 23:54:27 2011] source mask rpix=6.0, npix_max = 170, mask sum = 169, frac = 0.990
[Tue Sep 27 23:54:27 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.97"
[Tue Sep 27 23:54:28 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 23:54:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 23:54:28 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 23:54:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 23:54:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12014_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:54:28 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 23:54:28 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 23:54:28 2011] Fit fullrun_ccd0_acisf12014_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 23:54:40 2011] Spatial fit model total counts = 147.579000, observed total counts = 148.000000
[Tue Sep 27 23:54:40 2011] Offset between fit and detection position for source 4 = 1.058318 pixels
[Tue Sep 27 23:54:40 2011] 148.453100 total counts/ 27.176100 bgd. counts: snr = 23.264026
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.058318 pixels
  Position = (529.4, 555.7) = 23 41 45.36 -54 17 10.1
  Extent = 3.4 (2.8-4.0)", rotation angle = 0
  Source counts = 121.3 +/- 12.2
  Background counts = 27.2
  Rate = 0.002 +/- 0.0002
[Tue Sep 27 23:54:40 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:54:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:54:40 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:54:40 2011] Source does appear to be extended
[Tue Sep 27 23:54:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:55:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 23:55:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 23:55:05 2011] Initial guess for spatial extent in simple fitting = 3.39"
[Tue Sep 27 23:55:05 2011] source mask rpix=6.9, npix_max = 218, mask sum = 225, frac = 1.032
[Tue Sep 27 23:55:05 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.39"
[Tue Sep 27 23:55:06 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 23:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 23:55:06 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 23:55:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 23:55:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12014_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 23:55:06 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 23:55:06 2011] fullrun_ccd0_acisf12014_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 23:55:06 2011] Fit fullrun_ccd0_acisf12014_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 23:55:14 2011] Spatial fit model total counts = 156.190000, observed total counts = 158.000000
[Tue Sep 27 23:55:14 2011] Offset between fit and detection position for source 4 = 0.566495 pixels
[Tue Sep 27 23:55:14 2011] 156.334600 total counts/ 40.421600 bgd. counts: snr = 18.231626
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.566495 pixels
  Position = (529.9, 556.1) = 23 41 45.33 -54 17 9.9
  Extent = 3.3 (2.8-3.8)", rotation angle = 0
  Source counts = 115.9 +/- 12.5
  Background counts = 40.4
  Rate = 0.002 +/- 0.0002
[Tue Sep 27 23:55:14 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 23:55:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 23:55:14 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 23:55:14 2011] Source does appear to be extended
[Tue Sep 27 23:55:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:55:40 2011] Not overwriting source region fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.reg
[Tue Sep 27 23:55:40 2011] Extracting stamp from image fullrun_ccd0_acisf12014_pi14-548_cl_sm2.00.img.gz, (378, 404) - (682, 708)
[Tue Sep 27 23:55:40 2011] Writing fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4.gif
[Tue Sep 27 23:55:47 2011] ../../acisf12014/products/events/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.evt and ../../acisf12014/products/events/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Sep 27 23:55:47 2011] Size of ../../acisf12014/products/events/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.evt.gz[events] = 150 counts
[Tue Sep 27 23:55:47 2011] Mean chipx,y = (627.77, 467.00)
[Tue Sep 27 23:55:47 2011] Mean tdetx,y = (3528.00, 4504.23)
[Tue Sep 27 23:55:47 2011] chipx,y range = (594.00-663.00, 433.00-493.00)
[Tue Sep 27 23:55:47 2011] Size of ../../acisf12014/products/events/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 329 counts
[Tue Sep 27 23:55:47 2011] ../../acisf12014/products/images/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.img and ../../acisf12014/products/images/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Sep 27 23:55:47 2011] ../../acisf12014/products/spectra/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.pi and ../../acisf12014/products/spectra/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Sep 27 23:55:50 2011] ../../acisf12014/products/lightcurves/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.lc and ../../acisf12014/products/lightcurves/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Sep 27 23:56:17 2011] Keeping rmf generated by specextract
[Tue Sep 27 23:56:17 2011] 165.278
[Wed Sep 28 00:00:04 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:00:04 2011] Error reading totcts from fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 28 00:00:04 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:04 2011] Using photon index=1.80, rate=0.00213, arf fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 00:00:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:04 2011] Updating source flux to 3e-14
[Wed Sep 28 00:00:20 2011] Reading fit data from acisf12014/analysis//spectral/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_pl.csv
[Wed Sep 28 00:00:20 2011] Spectral fit parameter nH value = 4.63e+14
[Wed Sep 28 00:00:20 2011] Spectral fit parameter PhoIndex value = 2.09028
[Wed Sep 28 00:00:20 2011] Failed to get F(0.3-8.0) from acisf12014/analysis//spectral/fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 00:00:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:00:20 2011] Using Nh = 4.6e+14, photon index=2.09, rate=0.00213, arf fullrun_ccd0_acisf12014_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 00:00:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:00:20 2011] Updating source flux to 3e-14