[Mon Oct 24 09:48:55 2011] Detection parameters:
  Position = (1036.5, 352.5) = 17 0 28.80 -46 19 24.6
  Extent = 4.0" x 3.1", rotation angle = 33 degrees
  Source counts = 80.7 +/- 10.2
  Background counts = 24.3
  Rate = 0.003 +/- 0.0004

[Mon Oct 24 09:48:56 2011] Off-axis axis estimate = 9.53'
[Mon Oct 24 09:49:43 2011] Using EEF radius (= 4.02 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 09:49:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 09:49:43 2011] Initial guess for spatial extent in simple fitting = 4.02"
[Mon Oct 24 09:49:43 2011] source mask rpix=8.2, npix_max = 300, mask sum = 289, frac = 0.963
[Mon Oct 24 09:49:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.02"
[Mon Oct 24 09:49:44 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 09:49:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 09:49:44 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 09:49:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 09:49:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12006_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 09:49:44 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 09:49:44 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 09:49:44 2011] Fit fullrun_ccd6_acisf12006_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 09:49:50 2011] Spatial fit model total counts = 168.198000, observed total counts = 168.000000
[Mon Oct 24 09:49:50 2011] Offset between fit and detection position for source 2 = 7.797127 pixels
[Mon Oct 24 09:49:50 2011] 168.158800 total counts/ 45.514800 bgd. counts: snr = 18.179000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.797127 pixels
  Position = (1043.7, 349.4) = 17 0 28.48 -46 19 26.4
  Extent = 4.8 (4.0-5.8)", rotation angle = 0
  Source counts = 122.6 +/- 13.0
  Background counts = 45.5
  Rate = 0.005 +/- 0.0005
[Mon Oct 24 09:49:50 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 09:49:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 09:49:50 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 09:49:50 2011] Source does appear to be extended
[Mon Oct 24 09:49:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 09:49:50 2011] Source is confused with source 3
[Mon Oct 24 09:50:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 09:50:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 09:50:08 2011] Initial guess for spatial extent in simple fitting = 4.83"
[Mon Oct 24 09:50:08 2011] source mask rpix=9.8, npix_max = 426, mask sum = 441, frac = 1.035
[Mon Oct 24 09:50:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.83"
[Mon Oct 24 09:50:09 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 09:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 09:50:09 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 09:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 09:50:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12006_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 09:50:09 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 09:50:09 2011] fullrun_ccd6_acisf12006_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 09:50:09 2011] Fit fullrun_ccd6_acisf12006_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 09:50:15 2011] Spatial fit model total counts = 179.747000, observed total counts = 181.000000
[Mon Oct 24 09:50:15 2011] Offset between fit and detection position for source 2 = 0.088243 pixels
[Mon Oct 24 09:50:15 2011] 179.813000 total counts/ 56.094000 bgd. counts: snr = 16.518789
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.088243 pixels
  Position = (1043.6, 349.4) = 17 0 28.49 -46 19 26.4
  Extent = 4.9 (4.2-5.6)", rotation angle = 0
  Source counts = 123.7 +/- 13.4
  Background counts = 56.1
  Rate = 0.005 +/- 0.0005
[Mon Oct 24 09:50:15 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 09:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 09:50:15 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 09:50:15 2011] Source does appear to be extended
[Mon Oct 24 09:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 09:50:57 2011] Not overwriting source region fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 09:50:57 2011] Extracting stamp from image fullrun_ccd6_acisf12006_pi14-548_cl_sm2.00.img.gz, (821, 127) - (1266, 572)
[Mon Oct 24 09:50:57 2011] Writing fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 09:50:58 2011] ../../acisf12006/products/events/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.evt and ../../acisf12006/products/events/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 09:50:58 2011] Size of ../../acisf12006/products/events/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.evt.gz[events] = 169 counts
[Mon Oct 24 09:50:58 2011] Mean chipx,y = (98.14, 782.51)
[Mon Oct 24 09:50:58 2011] Mean tdetx,y = (2973.14, 2484.51)
[Mon Oct 24 09:50:58 2011] chipx,y range = (62.00-152.00, 737.00-827.00)
[Mon Oct 24 09:50:58 2011] Size of ../../acisf12006/products/events/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 478 counts
[Mon Oct 24 09:50:58 2011] ../../acisf12006/products/images/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.img and ../../acisf12006/products/images/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 09:50:58 2011] ../../acisf12006/products/spectra/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.pi and ../../acisf12006/products/spectra/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 09:51:01 2011] ../../acisf12006/products/lightcurves/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.lc and ../../acisf12006/products/lightcurves/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 09:51:37 2011] Keeping rmf generated by specextract
[Mon Oct 24 09:51:37 2011] 166.095
[Mon Oct 24 09:52:55 2011] Updating aperture counts using extracted products
[Mon Oct 24 09:52:55 2011] Error reading totcts from fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 09:52:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 09:52:55 2011] Using photon index=1.80, rate=0.0048, arf fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 09:52:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 09:52:55 2011] Updating source flux to 7.3e-14
[Mon Oct 24 09:53:00 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Oct 24 09:53:07 2011] Reading fit data from acisf12006/analysis//spectral/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 24 09:53:07 2011] Spectral fit parameter nH value = 2.14726e+14
[Mon Oct 24 09:53:07 2011] Spectral fit parameter PhoIndex value = 2.87828
[Mon Oct 24 09:53:07 2011] Failed to get F(0.3-8.0) from acisf12006/analysis//spectral/fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 09:53:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 09:53:07 2011] Using Nh = 2.1e+14, photon index=2.88, rate=0.0048, arf fullrun_ccd6_acisf12006_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 09:53:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 09:53:08 2011] Updating source flux to 7e-14