[Mon Oct 17 16:51:15 2011] Detection parameters:
  Position = (1002.8, 698.7) = 14 37 15.24 34 6 53.7
  Extent = 6.8" x 5.9", rotation angle = 100 degrees
  Source counts = 463.8 +/- 26.2
  Background counts = 222.2
  Rate = 0.01 +/- 0.0006

[Mon Oct 17 16:51:15 2011] Off-axis axis estimate = 14.08'
[Mon Oct 17 16:52:19 2011] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:52:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 16:52:19 2011] Initial guess for spatial extent in simple fitting = 8.93"
[Mon Oct 17 16:52:19 2011] source mask rpix=18.1, npix_max = 1390, mask sum = 1369, frac = 0.984
[Mon Oct 17 16:52:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.93"
[Mon Oct 17 16:52:20 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 16:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 16:52:20 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 16:52:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 16:52:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12003_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:52:20 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 16:52:20 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 16:52:20 2011] Fit fullrun_ccd3_acisf12003_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 16:52:29 2011] Spatial fit model total counts = 869.483000, observed total counts = 871.000000
[Mon Oct 17 16:52:29 2011] Offset between fit and detection position for source 9 = 0.690484 pixels
[Mon Oct 17 16:52:29 2011] 869.164000 total counts/ 256.031000 bgd. counts: snr = 38.318493
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.690484 pixels
  Position = (1003.1, 699.3) = 14 37 15.25 34 6 53.7
  Extent = 8.2 (7.8-8.8)", rotation angle = 0
  Source counts = 613.1 +/- 29.5
  Background counts = 256.0
  Rate = 0.01 +/- 0.0007
[Mon Oct 17 16:52:29 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:52:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:52:29 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:52:29 2011] Source does appear to be extended
[Mon Oct 17 16:52:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:52:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 16:52:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 16:52:52 2011] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Oct 17 16:52:52 2011] source mask rpix=16.7, npix_max = 1181, mask sum = 1190, frac = 1.007
[Mon Oct 17 16:52:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.21"
[Mon Oct 17 16:52:52 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 16:52:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 16:52:52 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 16:52:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 16:52:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12003_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 16:52:52 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 16:52:52 2011] fullrun_ccd3_acisf12003_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 16:52:52 2011] Fit fullrun_ccd3_acisf12003_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 16:53:00 2011] Spatial fit model total counts = 832.207000, observed total counts = 833.000000
[Mon Oct 17 16:53:00 2011] Offset between fit and detection position for source 9 = 0.239295 pixels
[Mon Oct 17 16:53:00 2011] 831.894000 total counts/ 219.539000 bgd. counts: snr = 41.328289
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.239295 pixels
  Position = (1003.0, 699.5) = 14 37 15.25 34 6 53.8
  Extent = 8.2 (7.7-8.8)", rotation angle = 0
  Source counts = 612.4 +/- 28.8
  Background counts = 219.5
  Rate = 0.01 +/- 0.0007
[Mon Oct 17 16:53:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 16:53:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 16:53:00 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 16:53:00 2011] Source does appear to be extended
[Mon Oct 17 16:53:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 16:53:51 2011] Not overwriting source region fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.reg
[Mon Oct 17 16:53:51 2011] Extracting stamp from image fullrun_ccd3_acisf12003_pi14-548_cl_sm2.00.img.gz, (627, 324) - (1379, 1075)
[Mon Oct 17 16:53:51 2011] Writing fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9.gif
[Mon Oct 17 16:53:52 2011] ../../acisf12003/products/events/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.evt and ../../acisf12003/products/events/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Oct 17 16:53:52 2011] Size of ../../acisf12003/products/events/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.evt.gz[events] = 779 counts
[Mon Oct 17 16:53:52 2011] Mean chipx,y = (680.75, 274.44)
[Mon Oct 17 16:53:52 2011] Mean tdetx,y = (4857.56, 3741.75)
[Mon Oct 17 16:53:52 2011] chipx,y range = (613.00-746.00, 198.00-351.00)
[Mon Oct 17 16:53:52 2011] Size of ../../acisf12003/products/events/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 2197 counts
[Mon Oct 17 16:53:52 2011] ../../acisf12003/products/images/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.img and ../../acisf12003/products/images/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Oct 17 16:53:52 2011] ../../acisf12003/products/spectra/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.pi and ../../acisf12003/products/spectra/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Oct 17 16:53:55 2011] ../../acisf12003/products/lightcurves/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.lc and ../../acisf12003/products/lightcurves/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Oct 17 16:54:07 2011] Keeping rmf generated by specextract
[Mon Oct 17 16:54:07 2011] 146.471
[Mon Oct 17 16:56:29 2011] Updating aperture counts using extracted products
[Mon Oct 17 16:56:29 2011] Error reading totcts from fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_src.pi.gz
[Mon Oct 17 16:56:29 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 16:56:29 2011] Using photon index=1.80, rate=0.0142, arf fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9.arf
[Mon Oct 17 16:56:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 16:56:29 2011] Updating source flux to 2.2e-13
[Mon Oct 17 16:56:42 2011] Reading fit data from acisf12003/analysis//spectral/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_pl.csv
[Mon Oct 17 16:56:42 2011] Spectral fit parameter nH value = 2.36646e+20
[Mon Oct 17 16:56:42 2011] Spectral fit parameter PhoIndex value = 2.59454
[Mon Oct 17 16:56:42 2011] Failed to get F(0.3-8.0) from acisf12003/analysis//spectral/fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 16:56:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 16:56:42 2011] Using Nh = 2.4e+20, photon index=2.59, rate=0.0142, arf fullrun_ccd3_acisf12003_pi14-548_pass1_cl_src9.arf
[Mon Oct 17 16:56:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 16:56:42 2011] Updating source flux to 2.2e-13