[Fri Oct 28 16:14:52 2011] Detection parameters:
  Position = (928.9, 1153.7) = 5 33 25.11 -50 2 18.2
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 21.6 +/- 4.7
  Background counts = 0.4
  Rate = 0.0008 +/- 0.0002

[Fri Oct 28 16:14:53 2011] Off-axis axis estimate = 2.37'
[Fri Oct 28 16:15:35 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:15:35 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Oct 28 16:15:35 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.050
[Fri Oct 28 16:15:35 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.47"
[Fri Oct 28 16:15:36 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct 28 16:15:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 16:15:36 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct 28 16:15:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 16:15:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12002_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:15:36 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct 28 16:15:36 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct 28 16:15:36 2011] Fit fullrun_ccd3_acisf12002_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct 28 16:15:46 2011] Spatial fit model total counts = 22.051100, observed total counts = 24.000000
[Fri Oct 28 16:15:46 2011] Offset between fit and detection position for source 9 = 0.687577 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.687577 pixels
  Position = (929.4, 1154.2) = 5 33 25.11 -50 2 18.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 22.1 +/- 4.7
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 28 16:15:46 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:15:46 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:15:46 2011] Source does appear to be extended
[Fri Oct 28 16:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:16:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:16:11 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct 28 16:16:11 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.150
[Fri Oct 28 16:16:11 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.44"
[Fri Oct 28 16:16:12 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct 28 16:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 16:16:12 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct 28 16:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 16:16:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12002_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:16:12 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct 28 16:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct 28 16:16:12 2011] fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct 28 16:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct 28 16:16:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12002_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:16:24 2011] Spatial fit model total counts = 20.791000, observed total counts = 24.000000
[Fri Oct 28 16:16:24 2011] Offset between fit and detection position for source 9 = 0.039623 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.039623 pixels
  Position = (929.4, 1154.2) = 5 33 25.11 -50 2 18.2
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 20.9 +/- 4.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Oct 28 16:16:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:16:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:16:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:16:24 2011] Source does appear to be extended
[Fri Oct 28 16:16:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:18:27 2011] Not overwriting source region fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 28 16:18:27 2011] Extracting stamp from image fullrun_ccd3_acisf12002_pi14-548_cl_sm2.00.img.gz, (909, 1134) - (949, 1174)
[Fri Oct 28 16:18:27 2011] Writing fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9.gif
[Fri Oct 28 16:18:46 2011] ../../acisf12002/products/events/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.evt and ../../acisf12002/products/events/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 28 16:18:46 2011] Size of ../../acisf12002/products/events/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.evt.gz[events] = 22 counts
[Fri Oct 28 16:18:46 2011] Mean chipx,y = (901.64, 941.27)
[Fri Oct 28 16:18:46 2011] Mean tdetx,y = (4190.73, 3962.64)
[Fri Oct 28 16:18:46 2011] chipx,y range = (886.00-920.00, 925.00-959.00)
[Fri Oct 28 16:18:46 2011] Size of ../../acisf12002/products/events/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 4 counts
[Fri Oct 28 16:18:46 2011] ../../acisf12002/products/images/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.img and ../../acisf12002/products/images/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 28 16:18:46 2011] ../../acisf12002/products/spectra/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.pi and ../../acisf12002/products/spectra/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 28 16:18:46 2011] Not generating rmf since there are only 20 counts
[Fri Oct 28 16:18:51 2011] ../../acisf12002/products/lightcurves/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.lc and ../../acisf12002/products/lightcurves/fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 28 16:19:27 2011] 202.037
[Fri Oct 28 16:19:37 2011] Updating aperture counts using extracted products
[Fri Oct 28 16:19:37 2011] Error reading totcts from fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 28 16:19:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 16:19:37 2011] Using photon index=1.80, rate=0.000762, arf fullrun_ccd3_acisf12002_pi14-548_pass1_cl_src9.arf
[Fri Oct 28 16:19:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 16:19:37 2011] Updating source flux to 8.8e-15
[Fri Oct 28 16:19:46 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting