[Fri Feb 17 16:09:53 2012] Detection parameters:
  Position = (810.1, 1016.6) = 1 29 30.18 -73 33 10.7
  Extent = 0.5" x 0.5", rotation angle = 69 degrees
  Source counts = 220.4 +/- 14.9
  Background counts = 1.6
  Rate = 0.008 +/- 0.0006

[Fri Feb 17 16:09:53 2012] Off-axis axis estimate = 2.07'
[Fri Feb 17 16:43:13 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:43:13 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Feb 17 16:43:13 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.777
[Fri Feb 17 16:43:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.44"
[Fri Feb 17 16:54:34 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 16:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 16:54:34 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 16:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 16:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11989_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:54:34 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 16:54:34 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 16:54:34 2012] Fit fullrun_ccd3_acisf11989_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 16:54:41 2012] Spatial fit model total counts = 223.989000, observed total counts = 224.000000
[Fri Feb 17 16:54:41 2012] Offset between fit and detection position for source 3 = 0.748249 pixels
[Fri Feb 17 16:54:41 2012] 223.374750 total counts/ 7.395750 bgd. counts: snr = 79.418269
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.748249 pixels
  Position = (810.6, 1017.1) = 1 29 30.17 -73 33 10.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 216.0 +/- 14.9
  Background counts = 7.4
  Rate = 0.008 +/- 0.0006
[Fri Feb 17 16:54:41 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:54:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:54:41 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:54:41 2012] Source does appear to be extended
[Fri Feb 17 16:54:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:20:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:20:48 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Feb 17 17:20:48 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.056
[Fri Feb 17 17:20:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Fri Feb 17 17:30:50 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 17:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 17:30:50 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 17:30:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 17:30:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11989_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:30:50 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 17:30:50 2012] fullrun_ccd3_acisf11989_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 17:30:50 2012] Fit fullrun_ccd3_acisf11989_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 17:30:56 2012] Spatial fit model total counts = 223.875000, observed total counts = 224.000000
[Fri Feb 17 17:30:56 2012] Offset between fit and detection position for source 3 = 0.000216 pixels
[Fri Feb 17 17:30:56 2012] 223.221780 total counts/ 7.338780 bgd. counts: snr = 79.690492
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000216 pixels
  Position = (810.6, 1017.1) = 1 29 30.17 -73 33 10.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 215.9 +/- 14.9
  Background counts = 7.3
  Rate = 0.008 +/- 0.0006
[Fri Feb 17 17:30:56 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:30:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:30:56 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 17:30:56 2012] Source does appear to be extended
[Fri Feb 17 17:30:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:48:26 2012] Writing source region out to fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 17 17:48:26 2012] Extracting stamp from image fullrun_ccd3_acisf11989_pi14-548_cl_sm2.00.img.gz, (789, 996) - (832, 1039)
[Fri Feb 17 17:48:26 2012] Writing fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.gif
[Fri Feb 17 17:48:28 2012] Size of ../../acisf11989/products/events/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_src.evt.gz[events] = 218 counts
[Fri Feb 17 17:48:28 2012] Mean chipx,y = (866.64, 787.03)
[Fri Feb 17 17:48:28 2012] Mean tdetx,y = (4344.97, 3927.64)
[Fri Feb 17 17:48:28 2012] chipx,y range = (847.00-884.00, 770.00-805.00)
[Fri Feb 17 17:48:28 2012] Size of ../../acisf11989/products/events/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Fri Feb 17 17:48:29 2012] rmf not found, will run specextract
[Fri Feb 17 17:48:29 2012] arf not found, will run specextract
[Fri Feb 17 17:48:55 2012] ../../acisf11989/products/spectra/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 17 17:48:55 2012] ../../acisf11989/products/spectra/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 17 17:48:55 2012] Removal of ../../acisf11989/products/spectra/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 17 17:57:23 2012] Keeping rmf generated by specextract
[Fri Feb 17 17:57:23 2012] 200.438
[Fri Feb 17 17:57:26 2012] Updating aperture counts using extracted products
[Fri Feb 17 17:57:26 2012] Error reading totcts from fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 17 17:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:26 2012] Using photon index=1.80, rate=0.00804, arf fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 17:57:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:27 2012] Updating source flux to 9.2e-14
[Fri Feb 17 17:57:39 2012] Reading fit data from acisf11989/analysis//spectral/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_pl.csv
[Fri Feb 17 17:57:39 2012] Spectral fit parameter nH value = 2.43465e+21
[Fri Feb 17 17:57:39 2012] Spectral fit parameter PhoIndex value = 1.84417
[Fri Feb 17 17:57:39 2012] Failed to get F(0.3-8.0) from acisf11989/analysis//spectral/fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 17:57:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:39 2012] Using Nh = 2.4e+21, photon index=1.84, rate=0.00804, arf fullrun_ccd3_acisf11989_pi14-548_pass1_cl_src3.arf
[Fri Feb 17 17:57:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:39 2012] Updating source flux to 9.1e-14