[Fri Feb 17 16:09:51 2012] Detection parameters:
  Position = (104.8, 732.1) = 1 28 54.18 -73 33 40.1
  Extent = 0.5" x 0.5", rotation angle = 21 degrees
  Source counts = 25.1 +/- 5.1
  Background counts = 0.9
  Rate = 0.0009 +/- 0.0002

[Fri Feb 17 16:09:52 2012] Off-axis axis estimate = 1.80'
[Fri Feb 17 16:36:01 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:36:01 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Feb 17 16:36:01 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.840
[Fri Feb 17 16:36:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 16:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 16:43:13 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 16:54:40 2012] Spatial fit model total counts = 24.682000, observed total counts = 26.000000
[Fri Feb 17 16:54:40 2012] Offset between fit and detection position for source 6 = 0.904771 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.904771 pixels
  Position = (105.5, 732.7) = 1 28 54.16 -73 33 40.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 24.3 +/- 4.9
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Feb 17 16:54:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:54:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:54:40 2012] Source does appear to be extended
[Fri Feb 17 16:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:15:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:15:03 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Feb 17 17:15:03 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.846
[Fri Feb 17 17:15:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.56"
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 17:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 17:20:48 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 17:30:55 2012] Spatial fit model total counts = 25.119900, observed total counts = 26.000000
[Fri Feb 17 17:30:55 2012] Offset between fit and detection position for source 6 = 0.006214 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.006214 pixels
  Position = (105.5, 732.7) = 1 28 54.16 -73 33 40.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 24.7 +/- 5.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Feb 17 17:30:55 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:30:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:30:55 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 17:30:55 2012] Source does appear to be extended
[Fri Feb 17 17:30:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:43:07 2012] Writing source region out to fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6_src.reg
[Fri Feb 17 17:43:07 2012] Extracting stamp from image fullrun_ccd2_acisf11989_pi14-548_cl_sm2.00.img.gz, (81, 708) - (130, 758)
[Fri Feb 17 17:43:07 2012] Writing fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6.gif
[Fri Feb 17 17:44:17 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6_src.evt.gz[events] = 25 counts
[Fri Feb 17 17:44:17 2012] Mean chipx,y = (288.08, 989.72)
[Fri Feb 17 17:44:17 2012] Mean tdetx,y = (4050.72, 3797.92)
[Fri Feb 17 17:44:17 2012] chipx,y range = (270.00-304.00, 975.00-1008.00)
[Fri Feb 17 17:44:17 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts
[Fri Feb 17 17:44:19 2012] Not generating rmf since there are only 24 counts
[Fri Feb 17 17:44:19 2012] arf not found, will run specextract
[Fri Feb 17 17:44:49 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6.warf not found
[Fri Feb 17 17:44:49 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6.wrmf not found
[Fri Feb 17 17:44:49 2012] Removal of ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6.soff failed
[Fri Feb 17 17:48:26 2012] Spectrum 6 has only 25 counts, deleting rmf
[Fri Feb 17 17:48:26 2012] 196.384
[Fri Feb 17 17:57:26 2012] Updating aperture counts using extracted products
[Fri Feb 17 17:57:26 2012] Error reading totcts from fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Feb 17 17:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:26 2012] Using photon index=1.80, rate=0.000921, arf fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src6.arf
[Fri Feb 17 17:57:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:26 2012] Updating source flux to 1.1e-14
[Fri Feb 17 17:57:31 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting