[Fri Feb 17 16:09:51 2012] Detection parameters:
  Position = (261.6, 1034.9) = 1 28 36.08 -73 31 11.0
  Extent = 0.5" x 0.5", rotation angle = 54 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Fri Feb 17 16:09:52 2012] Off-axis axis estimate = 2.26'
[Fri Feb 17 16:36:01 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:36:01 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Feb 17 16:36:01 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.093
[Fri Feb 17 16:36:01 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.46"
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src6.ximg exists
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Feb 17 16:43:13 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src6 appears to have run properly
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6.csv
[Fri Feb 17 16:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:54:40 2012] Spatial fit model total counts = 10.547600, observed total counts = 12.000000
[Fri Feb 17 16:54:40 2012] Offset between fit and detection position for source 4 = 0.724842 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.724842 pixels
  Position = (262.1, 1035.3) = 1 28 36.07 -73 31 11.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Feb 17 16:54:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:54:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:54:40 2012] Source does appear to be extended
[Fri Feb 17 16:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:15:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:15:03 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Feb 17 17:15:03 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.110
[Fri Feb 17 17:15:03 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.56"
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6.csv
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6.csv
[Fri Feb 17 17:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Feb 17 17:20:48 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Feb 17 17:30:55 2012] Spatial fit model total counts = 11.158900, observed total counts = 12.000000
[Fri Feb 17 17:30:55 2012] Offset between fit and detection position for source 4 = 0.038831 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.038831 pixels
  Position = (262.1, 1035.4) = 1 28 36.08 -73 31 11.0
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Feb 17 17:30:55 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:30:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:30:55 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 17:30:55 2012] Source does appear to be extended
[Fri Feb 17 17:30:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:43:07 2012] Writing source region out to fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4_src.reg
[Fri Feb 17 17:43:07 2012] Extracting stamp from image fullrun_ccd2_acisf11989_pi14-548_cl_sm2.00.img.gz, (237, 1011) - (287, 1060)
[Fri Feb 17 17:43:07 2012] Writing fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4.gif
[Fri Feb 17 17:46:11 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4_src.evt.gz[events] = 11 counts
[Fri Feb 17 17:46:11 2012] Mean chipx,y = (32.82, 775.09)
[Fri Feb 17 17:46:11 2012] Mean tdetx,y = (3836.09, 4053.18)
[Fri Feb 17 17:46:11 2012] chipx,y range = (10.00-43.00, 757.00-790.00)
[Fri Feb 17 17:46:11 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 3 counts
[Fri Feb 17 17:46:12 2012] Not generating rmf since there are only 11 counts
[Fri Feb 17 17:46:12 2012] arf not found, will run specextract
[Fri Feb 17 17:46:38 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4.warf not found
[Fri Feb 17 17:46:38 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4.wrmf not found
[Fri Feb 17 17:46:38 2012] Removal of ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4.soff failed
[Fri Feb 17 17:48:26 2012] Spectrum 4 has only 11 counts, deleting rmf
[Fri Feb 17 17:48:26 2012] 193.505
[Fri Feb 17 17:57:26 2012] Updating aperture counts using extracted products
[Fri Feb 17 17:57:26 2012] Error reading totcts from fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Feb 17 17:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:26 2012] Using photon index=1.80, rate=0.000425, arf fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src4.arf
[Fri Feb 17 17:57:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:26 2012] Updating source flux to 5e-15
[Fri Feb 17 17:57:31 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting