[Fri Feb 17 16:09:51 2012] Detection parameters:
  Position = (693.9, 818.7) = 1 27 45.96 -73 32 56.5
  Extent = 1.3" x 0.9", rotation angle = 39 degrees
  Source counts = 1332.9 +/- 37.0
  Background counts = 33.1
  Rate = 0.05 +/- 0.001

[Fri Feb 17 16:09:52 2012] Off-axis axis estimate = 5.70'
[Fri Feb 17 16:36:01 2012] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:36:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 16:36:01 2012] Initial guess for spatial extent in simple fitting = 1.49"
[Fri Feb 17 16:36:01 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Fri Feb 17 16:36:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.49"
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 16:43:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 16:43:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 16:43:13 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 16:43:13 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 16:54:40 2012] Spatial fit model total counts = 1366.010000, observed total counts = 1366.000000
[Fri Feb 17 16:54:40 2012] Offset between fit and detection position for source 1 = 0.711317 pixels
[Fri Feb 17 16:54:40 2012] 1367.945000 total counts/ 121.675000 bgd. counts: snr = 112.982574
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.711317 pixels
  Position = (694.4, 819.2) = 1 27 45.95 -73 32 56.6
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 1246.3 +/- 37.0
  Background counts = 121.7
  Rate = 0.05 +/- 0.001
[Fri Feb 17 16:54:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 16:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 16:54:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 16:54:40 2012] Source does appear to be extended
[Fri Feb 17 16:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:15:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:15:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 17:15:03 2012] Initial guess for spatial extent in simple fitting = 1.48"
[Fri Feb 17 17:15:03 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Fri Feb 17 17:15:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.48"
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 17:20:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 17:20:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11989_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 17:20:48 2012] fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 17:20:48 2012] Fit fullrun_ccd2_acisf11989_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 17:30:55 2012] Spatial fit model total counts = 1370.000000, observed total counts = 1370.000000
[Fri Feb 17 17:30:55 2012] Offset between fit and detection position for source 1 = 0.064501 pixels
[Fri Feb 17 17:30:55 2012] 1369.265000 total counts/ 118.625000 bgd. counts: snr = 114.827049
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.064501 pixels
  Position = (694.5, 819.2) = 1 27 45.95 -73 32 56.5
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 1250.6 +/- 37.0
  Background counts = 118.6
  Rate = 0.05 +/- 0.001
[Fri Feb 17 17:30:55 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:30:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:30:55 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 17:30:55 2012] Source does appear to be extended
[Fri Feb 17 17:30:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:43:07 2012] Writing source region out to fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 17 17:43:07 2012] Extracting stamp from image fullrun_ccd2_acisf11989_pi14-548_cl_sm2.00.img.gz, (627, 751) - (762, 887)
[Fri Feb 17 17:43:07 2012] Writing fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.gif
[Fri Feb 17 17:43:09 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1355 counts
[Fri Feb 17 17:43:09 2012] Mean chipx,y = (333.78, 397.90)
[Fri Feb 17 17:43:09 2012] Mean tdetx,y = (3458.90, 3752.22)
[Fri Feb 17 17:43:09 2012] chipx,y range = (308.00-358.00, 372.00-423.00)
[Fri Feb 17 17:43:09 2012] Size of ../../acisf11989/products/events/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 63 counts
[Fri Feb 17 17:43:10 2012] rmf not found, will run specextract
[Fri Feb 17 17:43:10 2012] arf not found, will run specextract
[Fri Feb 17 17:43:34 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 17 17:43:34 2012] ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 17 17:43:34 2012] Removal of ../../acisf11989/products/spectra/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 17 17:48:26 2012] Keeping rmf generated by specextract
[Fri Feb 17 17:48:26 2012] 178.736
[Fri Feb 17 17:57:26 2012] Updating aperture counts using extracted products
[Fri Feb 17 17:57:26 2012] Error reading totcts from fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 17 17:57:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:26 2012] Using photon index=1.80, rate=0.0466, arf fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 17:57:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:26 2012] Updating source flux to 5.9e-13
[Fri Feb 17 17:57:36 2012] Reading fit data from acisf11989/analysis//spectral/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_pl.csv
[Fri Feb 17 17:57:36 2012] Spectral fit parameter nH value = 3.01865e+20
[Fri Feb 17 17:57:36 2012] Spectral fit parameter PhoIndex value = 0.531272
[Fri Feb 17 17:57:36 2012] Failed to get F(0.3-8.0) from acisf11989/analysis//spectral/fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 17:57:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 17:57:36 2012] Using Nh = 3e+20, photon index=0.53, rate=0.0466, arf fullrun_ccd2_acisf11989_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 17:57:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 17:57:36 2012] Updating source flux to 1e-12