[Sat Oct 22 10:08:57 2011] Detection parameters:
  Position = (297.6, 766.9) = 1 28 30.79 -73 33 19.3
  Extent = 0.7" x 0.5", rotation angle = 31 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Sat Oct 22 10:08:58 2011] Off-axis axis estimate = 2.76'
[Sat Oct 22 10:09:47 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 10:09:47 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Oct 22 10:09:47 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.189
[Sat Oct 22 10:09:47 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.54"
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9.csv
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9_1.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9.csv
[Sat Oct 22 10:09:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9.csv
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9.csv
[Sat Oct 22 10:09:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 10:09:58 2011] Spatial fit model total counts = 13.147500, observed total counts = 15.000000
[Sat Oct 22 10:09:58 2011] Offset between fit and detection position for source 3 = 0.615165 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.615165 pixels
  Position = (298.1, 767.4) = 1 28 30.80 -73 33 19.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Oct 22 10:09:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 10:09:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 10:09:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 10:09:58 2011] Source does appear to be extended
[Sat Oct 22 10:09:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 10:10:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 10:10:19 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Oct 22 10:10:19 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.088
[Sat Oct 22 10:10:19 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.81"
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9.ximg exists
[Sat Oct 22 10:10:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9.csv
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Oct 22 10:10:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9.csv
[Sat Oct 22 10:10:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Oct 22 10:10:21 2011] Fit fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Oct 22 10:10:32 2011] Spatial fit model total counts = 14.498400, observed total counts = 15.000000
[Sat Oct 22 10:10:32 2011] Offset between fit and detection position for source 3 = 0.093869 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.093869 pixels
  Position = (298.1, 767.5) = 1 28 30.80 -73 33 19.3
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Oct 22 10:10:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 10:10:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 10:10:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 10:10:32 2011] Source does appear to be extended
[Sat Oct 22 10:10:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 10:24:25 2011] Not overwriting source region fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 22 10:24:25 2011] Extracting stamp from image fullrun_ccd2_acisf11988_pi14-548_cl_sm2.00.img.gz, (261, 730) - (336, 805)
[Sat Oct 22 10:24:25 2011] Writing fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3.gif
[Sat Oct 22 10:29:21 2011] ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.evt and ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 22 10:29:22 2011] Size of ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.evt.gz[events] = 15 counts
[Sat Oct 22 10:29:22 2011] Mean chipx,y = (287.07, 788.80)
[Sat Oct 22 10:29:22 2011] Mean tdetx,y = (3849.80, 3798.93)
[Sat Oct 22 10:29:22 2011] chipx,y range = (272.00-306.00, 775.00-806.00)
[Sat Oct 22 10:29:22 2011] Size of ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 10 counts
[Sat Oct 22 10:29:22 2011] ../../acisf11988/products/images/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.img and ../../acisf11988/products/images/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 22 10:29:22 2011] Not generating rmf since there are only 14 counts
[Sat Oct 22 10:29:22 2011] arf not found, will run specextract
[Sat Oct 22 10:29:56 2011] ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3.warf not found
[Sat Oct 22 10:29:56 2011] ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3.wrmf not found
[Sat Oct 22 10:29:56 2011] Removal of ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3.soff failed
[Sat Oct 22 10:30:02 2011] ../../acisf11988/products/lightcurves/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.lc and ../../acisf11988/products/lightcurves/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 22 10:31:01 2011] Spectrum 3 has only 14 counts, deleting rmf
[Sat Oct 22 10:31:01 2011] 192.843
[Sat Oct 22 10:43:23 2011] Updating aperture counts using extracted products
[Sat Oct 22 10:43:23 2011] Error reading totcts from fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 22 10:43:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 10:43:23 2011] Using photon index=1.80, rate=0.000436, arf fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 10:43:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 10:43:23 2011] Updating source flux to 5.1e-15
[Sat Oct 22 10:43:31 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting