[Sat Oct 22 10:08:57 2011] Detection parameters:
  Position = (684.9, 811.6) = 1 27 45.95 -73 32 56.6
  Extent = 1.2" x 0.8", rotation angle = 37 degrees
  Source counts = 1774.2 +/- 42.7
  Background counts = 47.8
  Rate = 0.05 +/- 0.001

[Sat Oct 22 10:08:58 2011] Off-axis axis estimate = 5.70'
[Sat Oct 22 10:09:47 2011] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 10:09:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 10:09:47 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Sat Oct 22 10:09:47 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.988
[Sat Oct 22 10:09:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.49"
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 10:09:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 10:09:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11988_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 10:09:48 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 10:09:48 2011] Fit fullrun_ccd2_acisf11988_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 10:09:58 2011] Spatial fit model total counts = 1820.470000, observed total counts = 1816.000000
[Sat Oct 22 10:09:58 2011] Offset between fit and detection position for source 1 = 0.949276 pixels
[Sat Oct 22 10:09:58 2011] 1818.856000 total counts/ 136.476000 bgd. counts: snr = 144.011096
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.949276 pixels
  Position = (685.6, 812.2) = 1 27 45.93 -73 32 56.5
  Extent = 1.5 (1.4-1.6)", rotation angle = 0
  Source counts = 1682.4 +/- 42.6
  Background counts = 136.5
  Rate = 0.05 +/- 0.001
[Sat Oct 22 10:09:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 10:09:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 10:09:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 10:09:58 2011] Source does appear to be extended
[Sat Oct 22 10:09:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 10:10:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 10:10:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 10:10:19 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sat Oct 22 10:10:19 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sat Oct 22 10:10:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Sat Oct 22 10:10:20 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 10:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 10:10:20 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 10:10:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 10:10:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11988_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 10:10:21 2011] fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 10:10:21 2011] Fit fullrun_ccd2_acisf11988_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 10:10:32 2011] Spatial fit model total counts = 1814.000000, observed total counts = 1814.000000
[Sat Oct 22 10:10:32 2011] Offset between fit and detection position for source 1 = 0.024762 pixels
[Sat Oct 22 10:10:32 2011] 1811.228000 total counts/ 148.108000 bgd. counts: snr = 136.657769
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024762 pixels
  Position = (685.7, 812.2) = 1 27 45.92 -73 32 56.5
  Extent = 1.5 (1.4-1.5)", rotation angle = 0
  Source counts = 1663.1 +/- 42.6
  Background counts = 148.1
  Rate = 0.05 +/- 0.001
[Sat Oct 22 10:10:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 10:10:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 10:10:32 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 10:10:32 2011] Source does appear to be extended
[Sat Oct 22 10:10:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 10:24:24 2011] Not overwriting source region fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 10:24:24 2011] Extracting stamp from image fullrun_ccd2_acisf11988_pi14-548_cl_sm2.00.img.gz, (618, 744) - (754, 880)
[Sat Oct 22 10:24:24 2011] Writing fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 10:24:25 2011] ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.evt and ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 10:24:25 2011] Size of ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1789 counts
[Sat Oct 22 10:24:25 2011] Mean chipx,y = (332.28, 401.67)
[Sat Oct 22 10:24:25 2011] Mean tdetx,y = (3462.67, 3753.72)
[Sat Oct 22 10:24:25 2011] chipx,y range = (305.00-357.00, 375.00-426.00)
[Sat Oct 22 10:24:25 2011] Size of ../../acisf11988/products/events/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 101 counts
[Sat Oct 22 10:24:25 2011] ../../acisf11988/products/images/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.img and ../../acisf11988/products/images/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 10:24:25 2011] rmf not found, will run specextract
[Sat Oct 22 10:24:25 2011] arf not found, will run specextract
[Sat Oct 22 10:24:50 2011] ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 22 10:24:50 2011] ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 22 10:24:50 2011] Removal of ../../acisf11988/products/spectra/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 22 10:24:56 2011] ../../acisf11988/products/lightcurves/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.lc and ../../acisf11988/products/lightcurves/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 10:31:01 2011] Keeping rmf generated by specextract
[Sat Oct 22 10:31:01 2011] 178.889
[Sat Oct 22 10:43:23 2011] Updating aperture counts using extracted products
[Sat Oct 22 10:43:23 2011] Error reading totcts from fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 22 10:43:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 10:43:23 2011] Using photon index=1.80, rate=0.0502, arf fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 10:43:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 10:43:23 2011] Updating source flux to 6.3e-13
[Sat Oct 22 10:43:36 2011] Reading fit data from acisf11988/analysis//spectral/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 22 10:43:36 2011] Spectral fit parameter nH value = 5.4238e+20
[Sat Oct 22 10:43:36 2011] Spectral fit parameter PhoIndex value = 0.628724
[Sat Oct 22 10:43:36 2011] Failed to get F(0.3-8.0) from acisf11988/analysis//spectral/fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 22 10:43:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 10:43:36 2011] Using Nh = 5.4e+20, photon index=0.63, rate=0.0502, arf fullrun_ccd2_acisf11988_pi14-548_pass1_cl_src1.arf
[Sat Oct 22 10:43:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 10:43:36 2011] Updating source flux to 1e-12