[Sun Oct  2 15:00:17 2011] Detection parameters:
  Position = (263.6, 684.3) = 0 50 47.96 -73 18 17.8
  Extent = 0.7" x 0.5", rotation angle = 93 degrees
  Source counts = 920.1 +/- 30.5
  Background counts = 8.9
  Rate = 0.03 +/- 0.001

[Sun Oct  2 15:00:17 2011] Off-axis axis estimate = 3.36'
[Sun Oct  2 15:01:19 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 15:01:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 15:01:19 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Oct  2 15:01:19 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.888
[Sun Oct  2 15:01:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.66"
[Sun Oct  2 15:01:19 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 15:01:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 15:01:19 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 15:01:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 15:01:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11983_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 15:01:19 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 15:01:19 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 15:01:19 2011] Fit fullrun_ccd6_acisf11983_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 15:01:25 2011] Spatial fit model total counts = 925.000000, observed total counts = 925.000000
[Sun Oct  2 15:01:25 2011] Offset between fit and detection position for source 2 = 0.692459 pixels
[Sun Oct  2 15:01:25 2011] 926.262800 total counts/ 37.002800 bgd. counts: snr = 146.187912
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.692459 pixels
  Position = (264.1, 684.8) = 0 50 47.96 -73 18 17.8
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 889.3 +/- 30.4
  Background counts = 37.0
  Rate = 0.03 +/- 0.001
[Sun Oct  2 15:01:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 15:01:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 15:01:25 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 15:01:25 2011] Source does appear to be extended
[Sun Oct  2 15:01:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 15:01:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 15:01:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 15:01:45 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Sun Oct  2 15:01:45 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783
[Sun Oct  2 15:01:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.87"
[Sun Oct  2 15:01:45 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 15:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 15:01:45 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 15:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 15:01:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11983_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 15:01:45 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 15:01:45 2011] fullrun_ccd6_acisf11983_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 15:01:45 2011] Fit fullrun_ccd6_acisf11983_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 15:01:51 2011] Spatial fit model total counts = 926.142000, observed total counts = 928.000000
[Sun Oct  2 15:01:51 2011] Offset between fit and detection position for source 2 = 0.013087 pixels
[Sun Oct  2 15:01:51 2011] 927.634900 total counts/ 44.253900 bgd. counts: snr = 132.792112
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013087 pixels
  Position = (264.1, 684.8) = 0 50 47.96 -73 18 17.8
  Extent = 0.9 (0.8-0.9)", rotation angle = 0
  Source counts = 883.4 +/- 30.5
  Background counts = 44.3
  Rate = 0.03 +/- 0.001
[Sun Oct  2 15:01:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 15:01:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 15:01:51 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 15:01:51 2011] Source does appear to be extended
[Sun Oct  2 15:01:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 15:02:41 2011] Not overwriting source region fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.reg
[Sun Oct  2 15:02:41 2011] Extracting stamp from image fullrun_ccd6_acisf11983_pi14-548_cl_sm2.00.img.gz, (225, 645) - (304, 724)
[Sun Oct  2 15:02:41 2011] Writing fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2.gif
[Sun Oct  2 15:02:43 2011] ../../acisf11983/products/events/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.evt and ../../acisf11983/products/events/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct  2 15:02:43 2011] Size of ../../acisf11983/products/events/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.evt.gz[events] = 916 counts
[Sun Oct  2 15:02:43 2011] Mean chipx,y = (905.59, 748.17)
[Sun Oct  2 15:02:43 2011] Mean tdetx,y = (3780.59, 2450.17)
[Sun Oct  2 15:02:43 2011] chipx,y range = (883.00-927.00, 727.00-771.00)
[Sun Oct  2 15:02:43 2011] Size of ../../acisf11983/products/events/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 33 counts
[Sun Oct  2 15:02:43 2011] ../../acisf11983/products/images/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.img and ../../acisf11983/products/images/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct  2 15:02:43 2011] ../../acisf11983/products/spectra/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.pi and ../../acisf11983/products/spectra/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct  2 15:02:46 2011] ../../acisf11983/products/lightcurves/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.lc and ../../acisf11983/products/lightcurves/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct  2 15:03:09 2011] Keeping rmf generated by specextract
[Sun Oct  2 15:03:09 2011] 202.698
[Sun Oct  2 15:03:46 2011] Updating aperture counts using extracted products
[Sun Oct  2 15:03:46 2011] Error reading totcts from fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct  2 15:03:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 15:03:46 2011] Using photon index=1.80, rate=0.0301, arf fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 15:03:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 15:03:46 2011] Updating source flux to 3.6e-13
[Sun Oct  2 15:04:08 2011] Reading fit data from acisf11983/analysis//spectral/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_pl.csv
[Sun Oct  2 15:04:08 2011] Spectral fit parameter nH value = 5.37881e+21
[Sun Oct  2 15:04:08 2011] Spectral fit parameter PhoIndex value = 1.01479
[Sun Oct  2 15:04:08 2011] Failed to get F(0.3-8.0) from acisf11983/analysis//spectral/fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Oct  2 15:04:08 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 15:04:08 2011] Using Nh = 5.4e+21, photon index=1.01, rate=0.0301, arf fullrun_ccd6_acisf11983_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 15:04:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 15:04:08 2011] Updating source flux to 5.3e-13