[Mon Oct 31 05:04:38 2011] Detection parameters:
  Position = (1020.9, 904.1) = 0 50 59.13 -73 20 56.1
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 28.8 +/- 5.8
  Background counts = 5.2
  Rate = 0.001 +/- 0.0002

[Mon Oct 31 05:04:39 2011] Off-axis axis estimate = 0.64'
[Mon Oct 31 05:53:53 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 05:53:53 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 31 05:53:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.605
[Mon Oct 31 05:53:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.39"
[Mon Oct 31 06:01:16 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 31 06:01:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 06:01:16 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 31 06:01:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3.csv
[Mon Oct 31 06:01:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11982_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 06:01:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 31 06:01:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 31 06:01:17 2011] Fit fullrun_ccd7_acisf11982_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 31 06:01:22 2011] Spatial fit model total counts = 48.999500, observed total counts = 49.000000
[Mon Oct 31 06:01:22 2011] Offset between fit and detection position for source 2 = 0.719314 pixels
[Mon Oct 31 06:01:22 2011] 49.352700 total counts/ 19.405800 bgd. counts: snr = 6.798077
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.719314 pixels
  Position = (1021.5, 904.6) = 0 50 59.12 -73 20 56.1
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 29.9 +/- 7.0
  Background counts = 19.4
  Rate = 0.001 +/- 0.0003
[Mon Oct 31 06:01:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 06:01:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 06:01:22 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 06:01:22 2011] Source does appear to be extended
[Mon Oct 31 06:01:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 06:40:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 06:40:45 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 31 06:40:45 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.242
[Mon Oct 31 06:40:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.42"
[Mon Oct 31 06:47:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 31 06:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 06:47:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 31 06:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3.csv
[Mon Oct 31 06:47:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11982_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 06:47:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 31 06:47:17 2011] fullrun_ccd7_acisf11982_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 31 06:47:17 2011] Fit fullrun_ccd7_acisf11982_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 31 06:47:21 2011] Spatial fit model total counts = 48.994700, observed total counts = 49.000000
[Mon Oct 31 06:47:21 2011] Offset between fit and detection position for source 2 = 0.006103 pixels
[Mon Oct 31 06:47:21 2011] 49.416300 total counts/ 19.394600 bgd. counts: snr = 6.817025
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006103 pixels
  Position = (1021.5, 904.5) = 0 50 59.12 -73 20 56.1
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 30.0 +/- 7.0
  Background counts = 19.4
  Rate = 0.001 +/- 0.0003
[Mon Oct 31 06:47:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 06:47:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 06:47:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 06:47:21 2011] Source does appear to be extended
[Mon Oct 31 06:47:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 06:55:02 2011] Writing source region out to fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 31 06:55:02 2011] Extracting stamp from image fullrun_ccd7_acisf11982_pi14-548_cl_sm2.00.img.gz, (1003, 886) - (1040, 923)
[Mon Oct 31 06:55:02 2011] Writing fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2.gif
[Mon Oct 31 06:55:38 2011] Size of ../../acisf11982/products/events/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2_src.evt.gz[events] = 32 counts
[Mon Oct 31 06:55:38 2011] Mean chipx,y = (117.28, 547.28)
[Mon Oct 31 06:55:38 2011] Mean tdetx,y = (4034.28, 2249.28)
[Mon Oct 31 06:55:38 2011] chipx,y range = (104.00-139.00, 527.00-562.00)
[Mon Oct 31 06:55:38 2011] Size of ../../acisf11982/products/events/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 32 counts
[Mon Oct 31 06:55:39 2011] Not generating rmf since there are only 30 counts
[Mon Oct 31 06:55:39 2011] arf not found, will run specextract
[Mon Oct 31 06:55:47 2011] ../../acisf11982/products/spectra/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2.warf not found
[Mon Oct 31 06:55:47 2011] ../../acisf11982/products/spectra/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2.wrmf not found
[Mon Oct 31 06:55:47 2011] Removal of ../../acisf11982/products/spectra/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2.soff failed
[Mon Oct 31 06:57:21 2011] Spectrum 2 has only 30 counts, deleting rmf
[Mon Oct 31 06:57:21 2011] 232.268
[Mon Oct 31 06:57:23 2011] Updating aperture counts using extracted products
[Mon Oct 31 06:57:23 2011] Error reading totcts from fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 31 06:57:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 06:57:23 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2.arf
[Mon Oct 31 06:57:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 06:57:23 2011] Updating source flux to 1.2e-14
[Mon Oct 31 06:57:39 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 31 06:57:40 2011] acisf11982/analysis//spectral/fullrun_ccd7_acisf11982_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete