[Tue Oct 18 09:13:36 2011] Detection parameters:
  Position = (605.3, 338.9) = 0 49 48.16 -73 22 11.4
  Extent = 1.4" x 0.8", rotation angle = 30 degrees
  Source counts = 80.3 +/- 9.1
  Background counts = 2.7
  Rate = 0.004 +/- 0.0004

[Tue Oct 18 09:13:36 2011] Off-axis axis estimate = 5.39'
[Tue Oct 18 09:14:10 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 09:14:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 09:14:10 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Tue Oct 18 09:14:10 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Tue Oct 18 09:14:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.35"
[Tue Oct 18 09:14:10 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 09:14:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 09:14:10 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 09:14:10 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 09:14:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11980_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 09:14:11 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 09:14:11 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 09:14:11 2011] Fit fullrun_ccd6_acisf11980_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 09:14:16 2011] Spatial fit model total counts = 101.497000, observed total counts = 103.000000
[Tue Oct 18 09:14:16 2011] Offset between fit and detection position for source 9 = 1.137448 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.137448 pixels
  Position = (606.4, 338.8) = 0 49 48.08 -73 22 11.7
  Extent = 1.8 (1.6-2.0)", rotation angle = 0
  Source counts = 99.1 +/- 10.0
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Tue Oct 18 09:14:16 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 09:14:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 09:14:16 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 09:14:16 2011] Source does appear to be extended
[Tue Oct 18 09:14:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 09:14:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 09:14:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 09:14:31 2011] Initial guess for spatial extent in simple fitting = 1.79"
[Tue Oct 18 09:14:31 2011] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.050
[Tue Oct 18 09:14:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.79"
[Tue Oct 18 09:14:31 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 09:14:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 09:14:31 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 09:14:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 09:14:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11980_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 09:14:31 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 09:14:31 2011] fullrun_ccd6_acisf11980_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 09:14:31 2011] Fit fullrun_ccd6_acisf11980_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 09:14:38 2011] Spatial fit model total counts = 105.595000, observed total counts = 106.000000
[Tue Oct 18 09:14:38 2011] Offset between fit and detection position for source 9 = 0.970561 pixels
[Tue Oct 18 09:14:38 2011] 105.678500 total counts/ 10.774800 bgd. counts: snr = 28.912027
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.970561 pixels
  Position = (605.5, 338.5) = 0 49 48.19 -73 22 11.9
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 94.9 +/- 10.3
  Background counts = 10.8
  Rate = 0.004 +/- 0.0005
[Tue Oct 18 09:14:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 09:14:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 09:14:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 09:14:38 2011] Source does appear to be extended
[Tue Oct 18 09:14:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 09:15:02 2011] Not overwriting source region fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.reg
[Tue Oct 18 09:15:02 2011] Extracting stamp from image fullrun_ccd6_acisf11980_pi14-548_cl_sm2.00.img.gz, (523, 256) - (688, 421)
[Tue Oct 18 09:15:02 2011] Writing fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9.gif
[Tue Oct 18 09:15:03 2011] ../../acisf11980/products/events/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.evt and ../../acisf11980/products/events/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Oct 18 09:15:03 2011] Size of ../../acisf11980/products/events/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.evt.gz[events] = 105 counts
[Tue Oct 18 09:15:03 2011] Mean chipx,y = (626.00, 239.10)
[Tue Oct 18 09:15:03 2011] Mean tdetx,y = (3501.00, 1941.10)
[Tue Oct 18 09:15:03 2011] chipx,y range = (605.00-651.00, 213.00-264.00)
[Tue Oct 18 09:15:03 2011] Size of ../../acisf11980/products/events/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 44 counts
[Tue Oct 18 09:15:03 2011] ../../acisf11980/products/images/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.img and ../../acisf11980/products/images/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Oct 18 09:15:03 2011] ../../acisf11980/products/spectra/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.pi and ../../acisf11980/products/spectra/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Oct 18 09:15:03 2011] Not generating rmf since there are only 94 counts
[Tue Oct 18 09:15:05 2011] ../../acisf11980/products/lightcurves/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.lc and ../../acisf11980/products/lightcurves/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Oct 18 09:15:25 2011] 190.701
[Tue Oct 18 09:16:10 2011] Updating aperture counts using extracted products
[Tue Oct 18 09:16:10 2011] Error reading totcts from fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Oct 18 09:16:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 09:16:10 2011] Using photon index=1.80, rate=0.00417, arf fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9.arf
[Tue Oct 18 09:16:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 09:16:10 2011] Updating source flux to 5.2e-14
[Tue Oct 18 09:16:19 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 09:16:20 2011] acisf11980/analysis//spectral/fullrun_ccd6_acisf11980_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete