[Tue Oct 18 09:13:35 2011] Detection parameters: Position = (1081.4, 794.3) = 0 51 52.39 -73 10 35.1 Extent = 2.5" x 2.1", rotation angle = 98 degrees Source counts = 649.2 +/- 28.7 Background counts = 173.8 Rate = 0.03 +/- 0.001 [Tue Oct 18 09:13:36 2011] Off-axis axis estimate = 11.55' [Tue Oct 18 09:14:10 2011] Using EEF radius (= 5.94 ")to estimate initial spatial extent for simple fitting [Tue Oct 18 09:14:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Oct 18 09:14:10 2011] Initial guess for spatial extent in simple fitting = 5.94" [Tue Oct 18 09:14:10 2011] source mask rpix=12.1, npix_max = 633, mask sum = 624, frac = 0.986 [Tue Oct 18 09:14:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.94" [Tue Oct 18 09:14:10 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1.ximg exists [Tue Oct 18 09:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1.csv [Tue Oct 18 09:14:10 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1_1.ximg exists [Tue Oct 18 09:14:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1.csv [Tue Oct 18 09:14:10 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11980_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Oct 18 09:14:10 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Tue Oct 18 09:14:10 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Tue Oct 18 09:14:10 2011] Fit fullrun_ccd3_acisf11980_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Tue Oct 18 09:14:15 2011] Spatial fit model total counts = 904.447000, observed total counts = 897.000000 [Tue Oct 18 09:14:15 2011] Offset between fit and detection position for source 2 = 2.057310 pixels [Tue Oct 18 09:14:15 2011] 903.831600 total counts/ 41.311600 bgd. counts: snr = 134.194021 Spatial fit parameters: Offset between fit and detection position for source 2 = 2.057310 pixels Position = (1082.7, 795.9) = 0 51 52.30 -73 10 34.5 Extent = 6.4 (6.1-6.7)", rotation angle = 0 Source counts = 862.5 +/- 30.1 Background counts = 41.3 Rate = 0.04 +/- 0.001 [Tue Oct 18 09:14:15 2011] Vigneting correction estimate = 1.000000 [Tue Oct 18 09:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 18 09:14:15 2011] Assessing source extent using major axis lower bound [Tue Oct 18 09:14:15 2011] Source does appear to be extended [Tue Oct 18 09:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Oct 18 09:14:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Oct 18 09:14:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Oct 18 09:14:30 2011] Initial guess for spatial extent in simple fitting = 6.39" [Tue Oct 18 09:14:30 2011] source mask rpix=13.0, npix_max = 727, mask sum = 726, frac = 0.998 [Tue Oct 18 09:14:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.39" [Tue Oct 18 09:14:31 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass1_src1.ximg exists [Tue Oct 18 09:14:31 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass1_src1_1.ximg exists [Tue Oct 18 09:14:31 2011] Fit fullrun_ccd3_acisf11980_pi14-548_cl_pass1_src1 appears to have run properly [Tue Oct 18 09:14:31 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Tue Oct 18 09:14:31 2011] fullrun_ccd3_acisf11980_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Tue Oct 18 09:14:31 2011] Fit fullrun_ccd3_acisf11980_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Tue Oct 18 09:14:37 2011] Spatial fit model total counts = 907.380000, observed total counts = 906.000000 [Tue Oct 18 09:14:37 2011] Offset between fit and detection position for source 2 = 0.117415 pixels [Tue Oct 18 09:14:37 2011] 906.583200 total counts/ 52.149200 bgd. counts: snr = 118.319056 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.117415 pixels Position = (1082.8, 795.8) = 0 51 52.30 -73 10 34.6 Extent = 6.5 (6.5-13.0)" x 5.8 (5.6-6.2)", rotation angle = 81 (62-90) degrees Source counts = 854.4 +/- 30.1 Background counts = 52.1 Rate = 0.04 +/- 0.001 [Tue Oct 18 09:14:37 2011] Vigneting correction estimate = 1.000000 [Tue Oct 18 09:14:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 18 09:14:37 2011] Assessing source extent using major axis lower bound [Tue Oct 18 09:14:37 2011] Source does appear to be extended [Tue Oct 18 09:14:37 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04 [Tue Oct 18 09:14:56 2011] Not overwriting source region fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.reg [Tue Oct 18 09:14:56 2011] Extracting stamp from image fullrun_ccd3_acisf11980_pi14-548_cl_sm2.00.img.gz, (784, 497) - (1267, 1094) [Tue Oct 18 09:14:56 2011] Writing fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2.gif [Tue Oct 18 09:14:56 2011] ../../acisf11980/products/events/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.evt and ../../acisf11980/products/events/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Tue Oct 18 09:14:56 2011] Size of ../../acisf11980/products/events/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.evt.gz[events] = 889 counts [Tue Oct 18 09:14:56 2011] Mean chipx,y = (549.17, 988.01) [Tue Oct 18 09:14:56 2011] Mean tdetx,y = (4143.99, 3610.17) [Tue Oct 18 09:14:56 2011] chipx,y range = (501.00-605.00, 927.00-1022.00) [Tue Oct 18 09:14:56 2011] Size of ../../acisf11980/products/events/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 376 counts [Tue Oct 18 09:14:56 2011] ../../acisf11980/products/images/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.img and ../../acisf11980/products/images/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Tue Oct 18 09:14:56 2011] ../../acisf11980/products/spectra/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.pi and ../../acisf11980/products/spectra/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Tue Oct 18 09:14:59 2011] ../../acisf11980/products/lightcurves/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.lc and ../../acisf11980/products/lightcurves/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Tue Oct 18 09:15:01 2011] Keeping rmf generated by specextract [Tue Oct 18 09:15:02 2011] 149.765 [Tue Oct 18 09:16:10 2011] Updating aperture counts using extracted products [Tue Oct 18 09:16:10 2011] Error reading totcts from fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_src.pi.gz [Tue Oct 18 09:16:10 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 18 09:16:10 2011] Using photon index=1.80, rate=0.0376, arf fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2.arf [Tue Oct 18 09:16:10 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 18 09:16:10 2011] Updating source flux to 5.9e-13 [Tue Oct 18 09:16:19 2011] Reading fit data from acisf11980/analysis//spectral/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_pl.csv [Tue Oct 18 09:16:19 2011] Spectral fit parameter nH value = 2.58659e+20 [Tue Oct 18 09:16:19 2011] Spectral fit parameter PhoIndex value = 1.14007 [Tue Oct 18 09:16:19 2011] Failed to get F(0.3-8.0) from acisf11980/analysis//spectral/fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Tue Oct 18 09:16:19 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 18 09:16:19 2011] Using Nh = 2.6e+20, photon index=1.14, rate=0.0376, arf fullrun_ccd3_acisf11980_pi14-548_pass1_cl_src2.arf [Tue Oct 18 09:16:19 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 18 09:16:19 2011] Updating source flux to 6.9e-13