[Sun Oct 23 22:46:24 2011] Detection parameters:
  Position = (603.1, 801.5) = 1 30 4.88 -73 33 25.1
  Extent = 3.0" x 2.2", rotation angle = 4 degrees
  Source counts = 24.5 +/- 6.2
  Background counts = 14.5
  Rate = 0.0007 +/- 0.0002

[Sun Oct 23 22:46:25 2011] Off-axis axis estimate = 4.34'
[Sun Oct 23 22:47:26 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:26 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Sun Oct 23 22:47:26 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.864
[Sun Oct 23 22:47:26 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.94"
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5.ximg exists
[Sun Oct 23 22:47:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5.csv
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Oct 23 22:47:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5.csv
[Sun Oct 23 22:47:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Oct 23 22:47:26 2011] Fit fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Oct 23 22:47:37 2011] Spatial fit model total counts = 21.563600, observed total counts = 23.000000
[Sun Oct 23 22:47:37 2011] Offset between fit and detection position for source 2 = 1.573351 pixels
[Sun Oct 23 22:47:37 2011] 22.330520 total counts/ 2.829220 bgd. counts: snr = 11.593917
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.573351 pixels
  Position = (602.0, 800.3) = 1 30 5.07 -73 33 25.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 19.5 +/- 4.7
  Background counts = 2.8
  Rate = 0.0005 +/- 0.0001
[Sun Oct 23 22:47:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:47:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 22:47:37 2011] Source does appear to be extended
[Sun Oct 23 22:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 22:47:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:59 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Oct 23 22:47:59 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.137
[Sun Oct 23 22:47:59 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.68"
[Sun Oct 23 22:48:00 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5.ximg exists
[Sun Oct 23 22:48:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5.csv
[Sun Oct 23 22:48:00 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Oct 23 22:48:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5.csv
[Sun Oct 23 22:48:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:48:01 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Oct 23 22:48:01 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Oct 23 22:48:01 2011] Fit fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Oct 23 22:48:13 2011] Spatial fit model total counts = 22.260800, observed total counts = 24.000000
[Sun Oct 23 22:48:13 2011] Offset between fit and detection position for source 2 = 0.087840 pixels
[Sun Oct 23 22:48:13 2011] 23.406230 total counts/ 3.512630 bgd. counts: snr = 10.614442
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.087840 pixels
  Position = (601.9, 800.3) = 1 30 5.08 -73 33 26.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 19.9 +/- 4.8
  Background counts = 3.5
  Rate = 0.0006 +/- 0.0001
[Sun Oct 23 22:48:13 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:48:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:48:13 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 22:48:13 2011] Source does appear to be extended
[Sun Oct 23 22:48:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 23:06:32 2011] Not overwriting source region fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 23 23:06:32 2011] Extracting stamp from image fullrun_ccd3_acisf11979_pi14-548_cl_sm2.00.img.gz, (572, 770) - (632, 830)
[Sun Oct 23 23:06:32 2011] Writing fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2.gif
[Sun Oct 23 23:08:24 2011] ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.evt and ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 23 23:08:24 2011] Size of ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.evt.gz[events] = 20 counts
[Sun Oct 23 23:08:24 2011] Mean chipx,y = (750.90, 534.60)
[Sun Oct 23 23:08:24 2011] Mean tdetx,y = (4597.40, 3811.90)
[Sun Oct 23 23:08:24 2011] chipx,y range = (738.00-772.00, 518.00-551.00)
[Sun Oct 23 23:08:24 2011] Size of ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 16 counts
[Sun Oct 23 23:08:24 2011] ../../acisf11979/products/images/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.img and ../../acisf11979/products/images/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 23 23:08:24 2011] Not generating rmf since there are only 19 counts
[Sun Oct 23 23:08:24 2011] arf not found, will run specextract
[Sun Oct 23 23:08:49 2011] ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2.warf not found
[Sun Oct 23 23:08:49 2011] ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2.wrmf not found
[Sun Oct 23 23:08:49 2011] Removal of ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2.soff failed
[Sun Oct 23 23:08:55 2011] ../../acisf11979/products/lightcurves/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.lc and ../../acisf11979/products/lightcurves/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 23 23:16:14 2011] Spectrum 2 has only 20 counts, deleting rmf
[Sun Oct 23 23:16:14 2011] 172.284
[Sun Oct 23 23:16:18 2011] Updating aperture counts using extracted products
[Sun Oct 23 23:16:18 2011] Error reading totcts from fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 23 23:16:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 23:16:18 2011] Using photon index=1.80, rate=0.000559, arf fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src2.arf
[Sun Oct 23 23:16:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 23:16:18 2011] Updating source flux to 7.4e-15
[Sun Oct 23 23:16:32 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting