[Sun Oct 23 22:46:25 2011] Detection parameters:
  Position = (578.1, 658.5) = 1 30 7.85 -73 34 35.4
  Extent = 4.7" x 3.0", rotation angle = 57 degrees
  Source counts = 13.2 +/- 5.6
  Background counts = 17.8
  Rate = 0.0004 +/- 0.0002

[Sun Oct 23 22:46:25 2011] Off-axis axis estimate = 4.98'
[Sun Oct 23 22:47:26 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:26 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Sun Oct 23 22:47:26 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.902
[Sun Oct 23 22:47:26 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.17"
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 23 22:47:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 22:47:26 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 23 22:47:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 22:47:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:47:27 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 23 22:47:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun Oct 23 22:47:27 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 23 22:47:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9.csv
[Sun Oct 23 22:47:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:47:37 2011] Source 14 is offset by 2.244355 and -0.139798 pixels which is larger than
2 X fitted extent = 1.191463 x 1.191463, not incorporating fit results
[Sun Oct 23 22:47:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:47:37 2011] Assessing source extent using major
[Sun Oct 23 22:47:37 2011] Source does appear to be extended
[Sun Oct 23 22:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.54
[Sun Oct 23 22:47:37 2011] Source is asymmetric
[Sun Oct 23 22:47:59 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:59 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Sun Oct 23 22:47:59 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.902
[Sun Oct 23 22:47:59 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.17"
[Sun Oct 23 22:48:00 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 23 22:48:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 22:48:00 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 23 22:48:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 22:48:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:48:01 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 23 22:48:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun Oct 23 22:48:01 2011] fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 23 22:48:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9.csv
[Sun Oct 23 22:48:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11979_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:48:13 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 31.116754 pixels away
[Sun Oct 23 22:48:13 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:48:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:48:13 2011] Assessing source extent using major
[Sun Oct 23 22:48:13 2011] Source does appear to be extended
[Sun Oct 23 22:48:13 2011] Computing asymmetry using major and minor axis, asym = 1.54
[Sun Oct 23 22:48:13 2011] Source is asymmetric
[Sun Oct 23 23:06:32 2011] Not overwriting source region fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.reg
[Sun Oct 23 23:06:32 2011] Extracting stamp from image fullrun_ccd3_acisf11979_pi14-548_cl_sm2.00.img.gz, (364, 444) - (792, 873)
[Sun Oct 23 23:06:32 2011] Writing fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14.gif
[Sun Oct 23 23:10:40 2011] ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.evt and ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Oct 23 23:10:40 2011] Size of ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.evt.gz[events] = 42 counts
[Sun Oct 23 23:10:40 2011] Mean chipx,y = (607.64, 517.64)
[Sun Oct 23 23:10:40 2011] Mean tdetx,y = (4614.36, 3668.64)
[Sun Oct 23 23:10:40 2011] chipx,y range = (572.00-652.00, 479.00-549.00)
[Sun Oct 23 23:10:40 2011] Size of ../../acisf11979/products/events/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 519 counts
[Sun Oct 23 23:10:40 2011] ../../acisf11979/products/images/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.img and ../../acisf11979/products/images/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Oct 23 23:10:40 2011] Not generating rmf since there are only 13 counts
[Sun Oct 23 23:10:40 2011] arf not found, will run specextract
[Sun Oct 23 23:11:05 2011] ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14.warf not found
[Sun Oct 23 23:11:05 2011] ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14.wrmf not found
[Sun Oct 23 23:11:05 2011] Removal of ../../acisf11979/products/spectra/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14.soff failed
[Sun Oct 23 23:11:11 2011] ../../acisf11979/products/lightcurves/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.lc and ../../acisf11979/products/lightcurves/fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Oct 23 23:16:14 2011] Spectrum 14 has only 13 counts, deleting rmf
[Sun Oct 23 23:16:14 2011] 186.369
[Sun Oct 23 23:16:18 2011] Updating aperture counts using extracted products
[Sun Oct 23 23:16:18 2011] Error reading totcts from fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14_src.pi.gz
[Sun Oct 23 23:16:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 23:16:18 2011] Using photon index=1.80, rate=0.000371, arf fullrun_ccd3_acisf11979_pi14-548_pass1_cl_src14.arf
[Sun Oct 23 23:16:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 23:16:18 2011] Updating source flux to 4.5e-15
[Sun Oct 23 23:16:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting