[Sun Oct 23 22:46:23 2011] Detection parameters:
  Position = (123.9, 1077.3) = 1 28 59.79 -73 31 56.2
  Extent = 0.5" x 0.5", rotation angle = 159 degrees
  Source counts = 17.1 +/- 4.2
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0001

[Sun Oct 23 22:46:24 2011] Off-axis axis estimate = 0.52'
[Sun Oct 23 22:47:25 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:25 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 23 22:47:25 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.893
[Sun Oct 23 22:47:25 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.39"
[Sun Oct 23 22:47:25 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6.ximg exists
[Sun Oct 23 22:47:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6.csv
[Sun Oct 23 22:47:25 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Oct 23 22:47:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6.csv
[Sun Oct 23 22:47:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11979_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:47:25 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Oct 23 22:47:25 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Oct 23 22:47:25 2011] Fit fullrun_ccd2_acisf11979_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Oct 23 22:47:35 2011] Spatial fit model total counts = 21.379400, observed total counts = 23.000000
[Sun Oct 23 22:47:35 2011] Offset between fit and detection position for source 7 = 0.924095 pixels
[Sun Oct 23 22:47:35 2011] 21.381800 total counts/ 5.933600 bgd. counts: snr = 6.341891
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.924095 pixels
  Position = (124.8, 1077.7) = 1 28 59.75 -73 31 56.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.4 +/- 4.6
  Background counts = 5.9
  Rate = 0.0004 +/- 0.0001
[Sun Oct 23 22:47:35 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:47:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:47:35 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 22:47:35 2011] Source does appear to be extended
[Sun Oct 23 22:47:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 22:47:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 22:47:59 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct 23 22:47:59 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.159
[Sun Oct 23 22:47:59 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.44"
[Sun Oct 23 22:47:59 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6.ximg exists
[Sun Oct 23 22:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6.csv
[Sun Oct 23 22:47:59 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Oct 23 22:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6.csv
[Sun Oct 23 22:47:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11979_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:47:59 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Oct 23 22:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Oct 23 22:47:59 2011] fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Oct 23 22:47:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6.csv
[Sun Oct 23 22:47:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11979_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 22:48:11 2011] Spatial fit model total counts = 16.435100, observed total counts = 22.000000
[Sun Oct 23 22:48:11 2011] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Oct 23 22:48:11 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 22:48:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 22:48:11 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 22:48:11 2011] Source does appear to be extended
[Sun Oct 23 22:48:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 22:59:46 2011] Not overwriting source region fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.reg
[Sun Oct 23 22:59:46 2011] Extracting stamp from image fullrun_ccd2_acisf11979_pi14-548_cl_sm2.00.img.gz, (105, 1058) - (145, 1098)
[Sun Oct 23 22:59:46 2011] Writing fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7.gif
[Sun Oct 23 23:02:45 2011] ../../acisf11979/products/events/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.evt and ../../acisf11979/products/events/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Oct 23 23:02:45 2011] Size of ../../acisf11979/products/events/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.evt.gz[events] = 16 counts
[Sun Oct 23 23:02:45 2011] Mean chipx,y = (38.81, 991.75)
[Sun Oct 23 23:02:45 2011] Mean tdetx,y = (4052.75, 4047.19)
[Sun Oct 23 23:02:45 2011] chipx,y range = (20.00-55.00, 977.00-1008.00)
[Sun Oct 23 23:02:45 2011] Size of ../../acisf11979/products/events/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 9 counts
[Sun Oct 23 23:02:45 2011] ../../acisf11979/products/images/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.img and ../../acisf11979/products/images/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Oct 23 23:02:45 2011] Not generating rmf since there are only 15 counts
[Sun Oct 23 23:02:45 2011] arf not found, will run specextract
[Sun Oct 23 23:03:16 2011] ../../acisf11979/products/spectra/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7.warf not found
[Sun Oct 23 23:03:16 2011] ../../acisf11979/products/spectra/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7.wrmf not found
[Sun Oct 23 23:03:16 2011] Removal of ../../acisf11979/products/spectra/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7.soff failed
[Sun Oct 23 23:03:22 2011] ../../acisf11979/products/lightcurves/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.lc and ../../acisf11979/products/lightcurves/fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Oct 23 23:06:31 2011] Spectrum 7 has only 15 counts, deleting rmf
[Sun Oct 23 23:06:31 2011] 191.847
[Sun Oct 23 23:16:18 2011] Updating aperture counts using extracted products
[Sun Oct 23 23:16:18 2011] Error reading totcts from fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7_src.pi.gz
[Sun Oct 23 23:16:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 23:16:18 2011] Using photon index=1.80, rate=0.000434, arf fullrun_ccd2_acisf11979_pi14-548_pass1_cl_src7.arf
[Sun Oct 23 23:16:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 23:16:18 2011] Updating source flux to 5.1e-15
[Sun Oct 23 23:16:27 2011] Flag p found in src. 7 procflags, skipping spectral fitting
[Sun Oct 23 23:16:27 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting