[Fri Oct 28 22:16:52 2011] Detection parameters: Position = (894.3, 828.7) = 1 29 30.19 -73 33 10.7 Extent = 0.5" x 0.5", rotation angle = 90 degrees Source counts = 293.3 +/- 17.2 Background counts = 1.7 Rate = 0.009 +/- 0.0005 [Fri Oct 28 22:16:53 2011] Off-axis axis estimate = 1.97' [Fri Oct 28 22:17:42 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting [Fri Oct 28 22:17:42 2011] Initial guess for spatial extent in simple fitting = 0.43" [Fri Oct 28 22:17:42 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.203 [Fri Oct 28 22:17:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43" [Fri Oct 28 22:17:43 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1.ximg exists [Fri Oct 28 22:17:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1.csv [Fri Oct 28 22:17:43 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1_1.ximg exists [Fri Oct 28 22:17:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1.csv [Fri Oct 28 22:17:43 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11978_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 28 22:17:44 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Fri Oct 28 22:17:44 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Fri Oct 28 22:17:44 2011] Fit fullrun_ccd3_acisf11978_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Fri Oct 28 22:17:53 2011] Spatial fit model total counts = 296.116000, observed total counts = 296.000000 [Fri Oct 28 22:17:53 2011] Offset between fit and detection position for source 1 = 0.705880 pixels [Fri Oct 28 22:17:53 2011] 296.253740 total counts/ 9.754740 bgd. counts: snr = 91.730817 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.705880 pixels Position = (894.8, 829.2) = 1 29 30.19 -73 33 10.7 Extent = 0.5 (0.4-0.5)", rotation angle = 0 Source counts = 286.5 +/- 17.2 Background counts = 9.8 Rate = 0.009 +/- 0.0005 [Fri Oct 28 22:17:53 2011] Vigneting correction estimate = 1.000000 [Fri Oct 28 22:17:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Oct 28 22:17:53 2011] Assessing source extent using major axis lower bound [Fri Oct 28 22:17:53 2011] Source does appear to be extended [Fri Oct 28 22:17:53 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Oct 28 22:18:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Oct 28 22:18:15 2011] Initial guess for spatial extent in simple fitting = 0.48" [Fri Oct 28 22:18:15 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.041 [Fri Oct 28 22:18:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.48" [Fri Oct 28 22:18:15 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1.ximg exists [Fri Oct 28 22:18:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1.csv [Fri Oct 28 22:18:15 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1_1.ximg exists [Fri Oct 28 22:18:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1.csv [Fri Oct 28 22:18:15 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11978_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Oct 28 22:18:15 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Fri Oct 28 22:18:15 2011] fullrun_ccd3_acisf11978_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Fri Oct 28 22:18:15 2011] Fit fullrun_ccd3_acisf11978_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Fri Oct 28 22:18:25 2011] Spatial fit model total counts = 296.291000, observed total counts = 296.000000 [Fri Oct 28 22:18:25 2011] Offset between fit and detection position for source 1 = 0.004023 pixels [Fri Oct 28 22:18:25 2011] 296.465900 total counts/ 9.525900 bgd. counts: snr = 92.968984 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.004023 pixels Position = (894.8, 829.2) = 1 29 30.19 -73 33 10.7 Extent = 0.5 (0.4-0.5)", rotation angle = 0 Source counts = 286.9 +/- 17.2 Background counts = 9.5 Rate = 0.009 +/- 0.0005 [Fri Oct 28 22:18:25 2011] Vigneting correction estimate = 1.000000 [Fri Oct 28 22:18:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Oct 28 22:18:25 2011] Assessing source extent using major axis lower bound [Fri Oct 28 22:18:25 2011] Source does appear to be extended [Fri Oct 28 22:18:25 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Oct 28 22:38:39 2011] Not overwriting source region fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.reg [Fri Oct 28 22:38:39 2011] Extracting stamp from image fullrun_ccd3_acisf11978_pi14-548_cl_sm2.00.img.gz, (873, 807) - (917, 851) [Fri Oct 28 22:38:39 2011] Writing fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.gif [Fri Oct 28 22:38:40 2011] ../../acisf11978/products/events/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.evt and ../../acisf11978/products/events/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Fri Oct 28 22:38:40 2011] Size of ../../acisf11978/products/events/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.evt.gz[events] = 290 counts [Fri Oct 28 22:38:40 2011] Mean chipx,y = (813.15, 830.68) [Fri Oct 28 22:38:40 2011] Mean tdetx,y = (4301.32, 3874.15) [Fri Oct 28 22:38:40 2011] chipx,y range = (793.00-833.00, 813.00-849.00) [Fri Oct 28 22:38:40 2011] Size of ../../acisf11978/products/events/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8 counts [Fri Oct 28 22:38:40 2011] ../../acisf11978/products/images/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.img and ../../acisf11978/products/images/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Fri Oct 28 22:38:40 2011] rmf not found, will run specextract [Fri Oct 28 22:38:40 2011] arf not found, will run specextract [Fri Oct 28 22:39:15 2011] ../../acisf11978/products/spectra/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.warf not found [Fri Oct 28 22:39:15 2011] ../../acisf11978/products/spectra/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.wrmf not found [Fri Oct 28 22:39:15 2011] Removal of ../../acisf11978/products/spectra/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.soff failed [Fri Oct 28 22:39:21 2011] ../../acisf11978/products/lightcurves/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.lc and ../../acisf11978/products/lightcurves/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Fri Oct 28 22:51:55 2011] Keeping rmf generated by specextract [Fri Oct 28 22:51:55 2011] 199.647 [Fri Oct 28 22:51:59 2011] Updating aperture counts using extracted products [Fri Oct 28 22:51:59 2011] Error reading totcts from fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_src.pi.gz [Fri Oct 28 22:51:59 2011] Calculating source flux in energy range 0.30-8.00 [Fri Oct 28 22:51:59 2011] Using photon index=1.80, rate=0.00904, arf fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.arf [Fri Oct 28 22:51:59 2011] Assuming count rate is from the 0.20-8.00 bandpass [Fri Oct 28 22:51:59 2011] Updating source flux to 1e-13 [Fri Oct 28 22:52:15 2011] Reading fit data from acisf11978/analysis//spectral/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_pl.csv [Fri Oct 28 22:52:15 2011] Spectral fit parameter nH value = 1.90678e+20 [Fri Oct 28 22:52:15 2011] Spectral fit parameter PhoIndex value = 1.61569 [Fri Oct 28 22:52:15 2011] Failed to get F(0.3-8.0) from acisf11978/analysis//spectral/fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Fri Oct 28 22:52:15 2011] Calculating source flux in energy range 0.30-8.00 [Fri Oct 28 22:52:15 2011] Using Nh = 1.9e+20, photon index=1.62, rate=0.00904, arf fullrun_ccd3_acisf11978_pi14-548_pass1_cl_src1.arf [Fri Oct 28 22:52:15 2011] Assuming count rate is from the 0.20-8.00 bandpass [Fri Oct 28 22:52:15 2011] Updating source flux to 1.1e-13