[Fri Oct 28 22:16:50 2011] Detection parameters:
  Position = (1037.3, 975.5) = 1 29 4.14 -73 23 30.3
  Extent = 3.3" x 2.6", rotation angle = 90 degrees
  Source counts = 106.4 +/- 11.3
  Background counts = 20.6
  Rate = 0.003 +/- 0.0004

[Fri Oct 28 22:16:50 2011] Off-axis axis estimate = 8.71'
[Fri Oct 28 22:17:40 2011] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:17:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 22:17:40 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Oct 28 22:17:40 2011] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.054
[Fri Oct 28 22:17:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.35"
[Fri Oct 28 22:17:41 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 22:17:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 22:17:41 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 22:17:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 22:17:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11978_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:17:41 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 22:17:41 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 22:17:41 2011] Fit fullrun_ccd1_acisf11978_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 22:17:51 2011] Spatial fit model total counts = 130.899000, observed total counts = 131.000000
[Fri Oct 28 22:17:51 2011] Offset between fit and detection position for source 2 = 2.004396 pixels
[Fri Oct 28 22:17:51 2011] 130.396600 total counts/ 19.379600 bgd. counts: snr = 25.218374
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.004396 pixels
  Position = (1038.3, 977.2) = 1 29 4.08 -73 23 29.7
  Extent = 3.4 (2.8-4.0)", rotation angle = 0
  Source counts = 111.0 +/- 11.4
  Background counts = 19.4
  Rate = 0.003 +/- 0.0004
[Fri Oct 28 22:17:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:17:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:17:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:17:51 2011] Source does appear to be extended
[Fri Oct 28 22:17:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:18:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 22:18:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 22:18:13 2011] Initial guess for spatial extent in simple fitting = 3.37"
[Fri Oct 28 22:18:13 2011] source mask rpix=6.9, npix_max = 216, mask sum = 225, frac = 1.040
[Fri Oct 28 22:18:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.37"
[Fri Oct 28 22:18:13 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 22:18:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 22:18:13 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 22:18:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 22:18:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11978_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 22:18:14 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 22:18:14 2011] fullrun_ccd1_acisf11978_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 22:18:14 2011] Fit fullrun_ccd1_acisf11978_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 22:18:23 2011] Spatial fit model total counts = 134.276000, observed total counts = 134.000000
[Fri Oct 28 22:18:23 2011] Offset between fit and detection position for source 2 = 0.246960 pixels
[Fri Oct 28 22:18:23 2011] 133.657700 total counts/ 30.035700 bgd. counts: snr = 18.907456
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.246960 pixels
  Position = (1038.6, 977.2) = 1 29 4.05 -73 23 29.7
  Extent = 3.1 (2.7-3.7)", rotation angle = 0
  Source counts = 103.6 +/- 11.6
  Background counts = 30.0
  Rate = 0.003 +/- 0.0004
[Fri Oct 28 22:18:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 22:18:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 22:18:23 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 22:18:23 2011] Source does appear to be extended
[Fri Oct 28 22:18:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 22:25:58 2011] Not overwriting source region fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 28 22:25:58 2011] Extracting stamp from image fullrun_ccd1_acisf11978_pi14-548_cl_sm2.00.img.gz, (896, 835) - (1133, 1120)
[Fri Oct 28 22:25:58 2011] Writing fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.gif
[Fri Oct 28 22:25:59 2011] ../../acisf11978/products/events/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.evt and ../../acisf11978/products/events/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 28 22:25:59 2011] Size of ../../acisf11978/products/events/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.evt.gz[events] = 125 counts
[Fri Oct 28 22:25:59 2011] Mean chipx,y = (964.04, 946.65)
[Fri Oct 28 22:25:59 2011] Mean tdetx,y = (4185.35, 5071.04)
[Fri Oct 28 22:25:59 2011] chipx,y range = (926.00-1001.00, 909.00-988.00)
[Fri Oct 28 22:25:59 2011] Size of ../../acisf11978/products/events/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 178 counts
[Fri Oct 28 22:25:59 2011] ../../acisf11978/products/images/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.img and ../../acisf11978/products/images/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 28 22:25:59 2011] rmf not found, will run specextract
[Fri Oct 28 22:25:59 2011] arf not found, will run specextract
[Fri Oct 28 22:26:31 2011] ../../acisf11978/products/spectra/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.warf not found
[Fri Oct 28 22:26:31 2011] ../../acisf11978/products/spectra/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.wrmf not found
[Fri Oct 28 22:26:31 2011] Removal of ../../acisf11978/products/spectra/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.soff failed
[Fri Oct 28 22:26:37 2011] ../../acisf11978/products/lightcurves/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.lc and ../../acisf11978/products/lightcurves/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 28 22:34:24 2011] Keeping rmf generated by specextract
[Fri Oct 28 22:34:24 2011] 168.712
[Fri Oct 28 22:51:58 2011] Updating aperture counts using extracted products
[Fri Oct 28 22:51:58 2011] Error reading totcts from fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 28 22:51:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 22:51:58 2011] Using photon index=1.80, rate=0.00326, arf fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.arf
[Fri Oct 28 22:51:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 22:51:58 2011] Updating source flux to 4.4e-14
[Fri Oct 28 22:52:07 2011] Reading fit data from acisf11978/analysis//spectral/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct 28 22:52:07 2011] Spectral fit parameter nH value = 9.10396e+14
[Fri Oct 28 22:52:07 2011] Spectral fit parameter PhoIndex value = 1.56
[Fri Oct 28 22:52:07 2011] Failed to get F(0.3-8.0) from acisf11978/analysis//spectral/fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 22:52:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 22:52:07 2011] Using Nh = 9.1e+14, photon index=1.56, rate=0.00326, arf fullrun_ccd1_acisf11978_pi14-548_pass1_cl_src2.arf
[Fri Oct 28 22:52:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 22:52:07 2011] Updating source flux to 4.9e-14