[Sat Sep 24 12:58:30 2011] Detection parameters:
  Position = (619.8, 740.3) = 5 40 5.98 -69 20 5.8
  Extent = 0.5" x 0.5", rotation angle = 37 degrees
  Source counts = 301.7 +/- 18.8
  Background counts = 51.3
  Rate = 0.01 +/- 0.0007

[Sat Sep 24 12:58:36 2011] Off-axis axis estimate = 1.73'
[Sat Sep 24 12:59:39 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 12:59:39 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 12:59:39 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.279
[Sat Sep 24 12:59:39 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.41"
[Sat Sep 24 12:59:48 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11.ximg exists
[Sat Sep 24 12:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 12:59:48 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Sep 24 12:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 12:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00119_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:59:52 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 12:59:52 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 12:59:52 2011] Fit fullrun_ccd7_acisf00119_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 13:00:06 2011] Spatial fit model total counts = 1347.880000, observed total counts = 1348.000000
[Sat Sep 24 13:00:06 2011] Offset between fit and detection position for source 7 = 3.061985 pixels
[Sat Sep 24 13:00:06 2011] Warning, changing simple spatial fit ID from 11 to 5
[Sat Sep 24 13:00:06 2011] 1318.110000 total counts/ 900.452000 bgd. counts: snr = 13.918439
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.061985 pixels
  Position = (617.3, 738.6) = 5 40 6.26 -69 20 6.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 417.7 +/- 36.3
  Background counts = 900.5
  Rate = 0.02 +/- 0.001
[Sat Sep 24 13:00:06 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 13:00:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 13:00:06 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 13:00:06 2011] Source does appear to be extended
[Sat Sep 24 13:00:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 13:00:06 2011] Source is confused with source 4
[Sat Sep 24 13:00:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 13:00:29 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sat Sep 24 13:00:29 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sat Sep 24 13:00:29 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.50"
[Sat Sep 24 13:00:29 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11.ximg exists
[Sat Sep 24 13:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 13:00:30 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Sep 24 13:00:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 13:00:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00119_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 13:00:30 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep 24 13:00:30 2011] fullrun_ccd7_acisf00119_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep 24 13:00:30 2011] Fit fullrun_ccd7_acisf00119_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Sep 24 13:00:37 2011] Spatial fit model total counts = 1346.620000, observed total counts = 1348.000000
[Sat Sep 24 13:00:37 2011] Offset between fit and detection position for source 7 = 0.076020 pixels
[Sat Sep 24 13:00:37 2011] Warning, changing simple spatial fit ID from 11 to 5
[Sat Sep 24 13:00:37 2011] 1328.492000 total counts/ 882.249000 bgd. counts: snr = 15.023663
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.076020 pixels
  Position = (617.3, 738.7) = 5 40 6.26 -69 20 6.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 446.2 +/- 36.4
  Background counts = 882.2
  Rate = 0.02 +/- 0.001
[Sat Sep 24 13:00:37 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 13:00:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 13:00:37 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 13:00:37 2011] Source does appear to be extended
[Sat Sep 24 13:00:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 13:03:43 2011] Not overwriting source region fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.reg
[Sat Sep 24 13:03:43 2011] Extracting stamp from image fullrun_ccd7_acisf00119_pi14-548_cl_sm2.00.img.gz, (549, 670) - (686, 807)
[Sat Sep 24 13:03:43 2011] Writing fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7.gif
[Sat Sep 24 13:04:17 2011] ../../acisf00119/products/events/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.evt and ../../acisf00119/products/events/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Sep 24 13:04:17 2011] Size of ../../acisf00119/products/events/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.evt.gz[events] = 2113 counts
[Sat Sep 24 13:04:17 2011] Mean chipx,y = (428.22, 500.80)
[Sat Sep 24 13:04:17 2011] Mean tdetx,y = (4345.22, 2202.80)
[Sat Sep 24 13:04:17 2011] chipx,y range = (400.00-454.00, 473.00-529.00)
[Sat Sep 24 13:04:17 2011] Size of ../../acisf00119/products/events/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 230 counts
[Sat Sep 24 13:04:17 2011] ../../acisf00119/products/images/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.img and ../../acisf00119/products/images/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Sep 24 13:04:17 2011] ../../acisf00119/products/spectra/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.pi and ../../acisf00119/products/spectra/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Sep 24 13:04:20 2011] ../../acisf00119/products/lightcurves/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.lc and ../../acisf00119/products/lightcurves/fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Sep 24 13:04:58 2011] Keeping rmf generated by specextract
[Sat Sep 24 13:04:58 2011] 244.352
[Sat Sep 24 13:05:05 2011] Updating aperture counts using extracted products
[Sat Sep 24 13:05:05 2011] Error reading totcts from fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Sep 24 13:05:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 13:05:05 2011] Using photon index=1.80, rate=0.016, arf fullrun_ccd7_acisf00119_pi14-548_pass1_cl_src7.arf
[Sat Sep 24 13:05:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 13:05:05 2011] Updating source flux to 1.3e-13
[Sat Sep 24 13:05:09 2011] Flag c found in src. 7 procflags, skipping spectral fitting