[Tue Sep 27 04:25:06 2011] Detection parameters:
  Position = (919.6, 340.9) = 13 31 2.50 -1 50 14.7
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 213.9 +/- 14.7
  Background counts = 2.1
  Rate = 0.01 +/- 0.0007

[Tue Sep 27 04:25:06 2011] Off-axis axis estimate = 1.55'
[Tue Sep 27 04:26:10 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 04:26:10 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Sep 27 04:26:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.883
[Tue Sep 27 04:26:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Tue Sep 27 04:26:10 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 04:26:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 04:26:10 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 04:26:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 04:26:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11879_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 04:26:10 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 04:26:10 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 04:26:10 2011] Fit fullrun_ccd3_acisf11879_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 04:26:20 2011] Spatial fit model total counts = 220.063000, observed total counts = 220.000000
[Tue Sep 27 04:26:20 2011] Offset between fit and detection position for source 22 = 0.752333 pixels
[Tue Sep 27 04:26:20 2011] 219.297400 total counts/ 14.480400 bgd. counts: snr = 53.823969
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.752333 pixels
  Position = (920.2, 341.4) = 13 31 2.50 -1 50 14.7
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 204.8 +/- 14.8
  Background counts = 14.5
  Rate = 0.01 +/- 0.0007
[Tue Sep 27 04:26:20 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 04:26:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 04:26:20 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 04:26:20 2011] Source does appear to be extended
[Tue Sep 27 04:26:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 04:26:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 04:26:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 04:26:43 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Sep 27 04:26:43 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.805
[Tue Sep 27 04:26:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.58"
[Tue Sep 27 04:26:43 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 04:26:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 04:26:43 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 04:26:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 04:26:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11879_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 04:26:43 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 04:26:43 2011] fullrun_ccd3_acisf11879_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 04:26:43 2011] Fit fullrun_ccd3_acisf11879_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 04:26:54 2011] Spatial fit model total counts = 215.635000, observed total counts = 220.000000
[Tue Sep 27 04:26:54 2011] Offset between fit and detection position for source 22 = 0.014896 pixels
[Tue Sep 27 04:26:54 2011] 212.508500 total counts/ 4.002500 bgd. counts: snr = 104.220436
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.014896 pixels
  Position = (920.2, 341.4) = 13 31 2.50 -1 50 14.7
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 208.5 +/- 14.6
  Background counts = 4.0
  Rate = 0.01 +/- 0.0007
[Tue Sep 27 04:26:54 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 04:26:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 04:26:54 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 04:26:54 2011] Source does appear to be extended
[Tue Sep 27 04:26:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 04:41:59 2011] Not overwriting source region fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.reg
[Tue Sep 27 04:41:59 2011] Extracting stamp from image fullrun_ccd3_acisf11879_pi14-548_cl_sm2.00.img.gz, (893, 315) - (947, 368)
[Tue Sep 27 04:41:59 2011] Writing fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.gif
[Tue Sep 27 04:42:03 2011] ../../acisf11879/products/events/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.evt and ../../acisf11879/products/events/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Tue Sep 27 04:42:03 2011] Size of ../../acisf11879/products/events/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.evt.gz[events] = 211 counts
[Tue Sep 27 04:42:03 2011] Mean chipx,y = (465.46, 922.05)
[Tue Sep 27 04:42:03 2011] Mean tdetx,y = (4209.95, 3526.46)
[Tue Sep 27 04:42:03 2011] chipx,y range = (447.00-484.00, 904.00-942.00)
[Tue Sep 27 04:42:03 2011] Size of ../../acisf11879/products/events/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 17 counts
[Tue Sep 27 04:42:03 2011] ../../acisf11879/products/images/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.img and ../../acisf11879/products/images/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Tue Sep 27 04:42:03 2011] rmf not found, will run specextract
[Tue Sep 27 04:42:03 2011] arf not found, will run specextract
[Tue Sep 27 04:42:33 2011] ../../acisf11879/products/spectra/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.warf not found
[Tue Sep 27 04:42:33 2011] ../../acisf11879/products/spectra/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.wrmf not found
[Tue Sep 27 04:42:33 2011] Removal of ../../acisf11879/products/spectra/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.soff failed
[Tue Sep 27 04:42:53 2011] ../../acisf11879/products/lightcurves/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.lc and ../../acisf11879/products/lightcurves/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Tue Sep 27 05:00:02 2011] Keeping rmf generated by specextract
[Tue Sep 27 05:00:02 2011] 192.093
[Tue Sep 27 05:00:11 2011] Updating aperture counts using extracted products
[Tue Sep 27 05:00:11 2011] Error reading totcts from fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_src.pi.gz
[Tue Sep 27 05:00:12 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:00:12 2011] Using photon index=1.80, rate=0.0105, arf fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.arf
[Tue Sep 27 05:00:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:00:12 2011] Updating source flux to 1.3e-13
[Tue Sep 27 05:00:39 2011] Reading fit data from acisf11879/analysis//spectral/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_pl.csv
[Tue Sep 27 05:00:39 2011] Spectral fit parameter nH value = 7.52308e+13
[Tue Sep 27 05:00:39 2011] Spectral fit parameter PhoIndex value = 1.92403
[Tue Sep 27 05:00:39 2011] Failed to get F(0.3-8.0) from acisf11879/analysis//spectral/fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 05:00:39 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:00:39 2011] Using Nh = 7.5e+13, photon index=1.92, rate=0.0105, arf fullrun_ccd3_acisf11879_pi14-548_pass1_cl_src22.arf
[Tue Sep 27 05:00:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:00:39 2011] Updating source flux to 1.3e-13