[Tue Sep 27 04:25:02 2011] Detection parameters:
  Position = (589.8, 573.2) = 13 30 53.28 -1 55 21.6
  Extent = 0.9" x 0.7", rotation angle = 144 degrees
  Source counts = 122.1 +/- 11.2
  Background counts = 2.9
  Rate = 0.006 +/- 0.0006

[Tue Sep 27 04:25:03 2011] Off-axis axis estimate = 5.24'
[Tue Sep 27 04:26:09 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 04:26:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 04:26:09 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Tue Sep 27 04:26:09 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Tue Sep 27 04:26:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.28"
[Tue Sep 27 04:26:09 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 04:26:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 04:26:09 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 04:26:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 04:26:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11879_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 04:26:09 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 04:26:09 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 04:26:09 2011] Fit fullrun_ccd2_acisf11879_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 04:26:19 2011] Spatial fit model total counts = 133.393000, observed total counts = 131.000000
[Tue Sep 27 04:26:19 2011] Offset between fit and detection position for source 1 = 0.797523 pixels
[Tue Sep 27 04:26:19 2011] 133.247800 total counts/ 12.309800 bgd. counts: snr = 34.469683
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.797523 pixels
  Position = (590.4, 573.7) = 13 30 53.27 -1 55 21.6
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 120.9 +/- 11.5
  Background counts = 12.3
  Rate = 0.006 +/- 0.0006
[Tue Sep 27 04:26:19 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 04:26:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 04:26:19 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 04:26:19 2011] Source does appear to be extended
[Tue Sep 27 04:26:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 04:26:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 04:26:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 04:26:42 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Tue Sep 27 04:26:42 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Tue Sep 27 04:26:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.08"
[Tue Sep 27 04:26:42 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 04:26:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 04:26:42 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 04:26:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 04:26:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11879_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 04:26:42 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 04:26:42 2011] fullrun_ccd2_acisf11879_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 04:26:42 2011] Fit fullrun_ccd2_acisf11879_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 04:26:51 2011] Spatial fit model total counts = 129.424000, observed total counts = 129.000000
[Tue Sep 27 04:26:51 2011] Offset between fit and detection position for source 1 = 0.070382 pixels
[Tue Sep 27 04:26:51 2011] 129.578700 total counts/ 10.935700 bgd. counts: snr = 35.877223
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.070382 pixels
  Position = (590.4, 573.7) = 13 30 53.27 -1 55 21.6
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 118.6 +/- 11.4
  Background counts = 10.9
  Rate = 0.006 +/- 0.0006
[Tue Sep 27 04:26:51 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 04:26:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 04:26:51 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 04:26:51 2011] Source does appear to be extended
[Tue Sep 27 04:26:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 04:35:00 2011] Not overwriting source region fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 04:35:00 2011] Extracting stamp from image fullrun_ccd2_acisf11879_pi14-548_cl_sm2.00.img.gz, (542, 525) - (639, 622)
[Tue Sep 27 04:35:00 2011] Writing fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 04:35:01 2011] ../../acisf11879/products/events/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.evt and ../../acisf11879/products/events/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 04:35:01 2011] Size of ../../acisf11879/products/events/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.evt.gz[events] = 126 counts
[Tue Sep 27 04:35:01 2011] Mean chipx,y = (689.75, 472.89)
[Tue Sep 27 04:35:01 2011] Mean tdetx,y = (3533.89, 3396.25)
[Tue Sep 27 04:35:01 2011] chipx,y range = (673.00-708.00, 453.00-494.00)
[Tue Sep 27 04:35:01 2011] Size of ../../acisf11879/products/events/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 28 counts
[Tue Sep 27 04:35:01 2011] ../../acisf11879/products/images/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.img and ../../acisf11879/products/images/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 04:35:01 2011] rmf not found, will run specextract
[Tue Sep 27 04:35:01 2011] arf not found, will run specextract
[Tue Sep 27 04:35:34 2011] ../../acisf11879/products/spectra/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.warf not found
[Tue Sep 27 04:35:34 2011] ../../acisf11879/products/spectra/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.wrmf not found
[Tue Sep 27 04:35:34 2011] Removal of ../../acisf11879/products/spectra/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.soff failed
[Tue Sep 27 04:35:41 2011] ../../acisf11879/products/lightcurves/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.lc and ../../acisf11879/products/lightcurves/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 04:41:59 2011] Keeping rmf generated by specextract
[Tue Sep 27 04:41:59 2011] 160.981
[Tue Sep 27 05:00:09 2011] Updating aperture counts using extracted products
[Tue Sep 27 05:00:09 2011] Error reading totcts from fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 05:00:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:00:10 2011] Using photon index=1.80, rate=0.006, arf fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 05:00:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:00:10 2011] Updating source flux to 8.9e-14
[Tue Sep 27 05:00:34 2011] Reading fit data from acisf11879/analysis//spectral/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 05:00:34 2011] Spectral fit parameter nH value = 4.76761e+14
[Tue Sep 27 05:00:34 2011] Spectral fit parameter PhoIndex value = 1.96178
[Tue Sep 27 05:00:34 2011] Failed to get F(0.3-8.0) from acisf11879/analysis//spectral/fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 05:00:34 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 05:00:34 2011] Using Nh = 4.8e+14, photon index=1.96, rate=0.006, arf fullrun_ccd2_acisf11879_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 05:00:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 05:00:34 2011] Updating source flux to 9.1e-14