[Fri Oct 21 04:36:44 2011] Detection parameters:
  Position = (1050.9, 767.6) = 5 51 6.11 -57 8 55.2
  Extent = 1.2" x 0.9", rotation angle = 111 degrees
  Source counts = 104.7 +/- 10.4
  Background counts = 4.3
  Rate = 0.005 +/- 0.0005

[Fri Oct 21 04:36:45 2011] Off-axis axis estimate = 6.71'
[Fri Oct 21 04:37:29 2011] Using EEF radius (= 2.01 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 04:37:29 2011] Initial guess for spatial extent in simple fitting = 2.01"
[Fri Oct 21 04:37:29 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.963
[Fri Oct 21 04:37:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.01"
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 04:37:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 04:37:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 04:37:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 04:37:29 2011] Fit fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 04:37:37 2011] Spatial fit model total counts = 125.580000, observed total counts = 124.000000
[Fri Oct 21 04:37:37 2011] Offset between fit and detection position for source 3 = 1.288236 pixels
[Fri Oct 21 04:37:37 2011] 126.114300 total counts/ 15.068300 bgd. counts: snr = 28.606900
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.288236 pixels
  Position = (1051.6, 768.6) = 5 51 6.10 -57 8 54.9
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 111.0 +/- 11.2
  Background counts = 15.1
  Rate = 0.006 +/- 0.0006
[Fri Oct 21 04:37:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:37:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:37:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:37:37 2011] Source does appear to be extended
[Fri Oct 21 04:37:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:37:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 04:37:55 2011] Initial guess for spatial extent in simple fitting = 1.37"
[Fri Oct 21 04:37:55 2011] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.135
[Fri Oct 21 04:37:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.37"
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 04:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 04:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 04:37:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 04:37:55 2011] Fit fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 04:38:02 2011] Spatial fit model total counts = 118.374000, observed total counts = 119.000000
[Fri Oct 21 04:38:02 2011] Offset between fit and detection position for source 3 = 0.113862 pixels
[Fri Oct 21 04:38:02 2011] 118.057100 total counts/ 21.584700 bgd. counts: snr = 20.764911
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.113862 pixels
  Position = (1051.7, 768.7) = 5 51 6.09 -57 8 54.9
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 96.5 +/- 10.9
  Background counts = 21.6
  Rate = 0.005 +/- 0.0005
[Fri Oct 21 04:38:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:38:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:38:02 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:38:02 2011] Source does appear to be extended
[Fri Oct 21 04:38:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:39:22 2011] Not overwriting source region fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 04:39:22 2011] Extracting stamp from image fullrun_ccd3_acisf11871_pi14-548_cl_sm2.00.img.gz, (1000, 717) - (1104, 821)
[Fri Oct 21 04:39:22 2011] Writing fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 04:39:23 2011] ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.evt and ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 04:39:23 2011] Size of ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.evt.gz[events] = 114 counts
[Fri Oct 21 04:39:23 2011] Mean chipx,y = (262.42, 285.84)
[Fri Oct 21 04:39:23 2011] Mean tdetx,y = (4846.16, 3323.42)
[Fri Oct 21 04:39:23 2011] chipx,y range = (239.00-284.00, 265.00-309.00)
[Fri Oct 21 04:39:23 2011] Size of ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 23 counts
[Fri Oct 21 04:39:23 2011] ../../acisf11871/products/images/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.img and ../../acisf11871/products/images/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 04:39:23 2011] ../../acisf11871/products/spectra/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.pi and ../../acisf11871/products/spectra/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 04:39:23 2011] Not generating rmf since there are only 96 counts
[Fri Oct 21 04:39:26 2011] ../../acisf11871/products/lightcurves/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.lc and ../../acisf11871/products/lightcurves/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 04:40:13 2011] 169.335
[Fri Oct 21 04:40:22 2011] Updating aperture counts using extracted products
[Fri Oct 21 04:40:22 2011] Error reading totcts from fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 04:40:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 04:40:23 2011] Using photon index=1.80, rate=0.00488, arf fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 04:40:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 04:40:23 2011] Updating source flux to 6.8e-14
[Fri Oct 21 04:40:36 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 04:40:37 2011] acisf11871/analysis//spectral/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete