[Fri Oct 21 04:36:44 2011] Detection parameters:
  Position = (1013.9, 1029.4) = 5 51 8.39 -57 6 46.4
  Extent = 1.4" x 1.1", rotation angle = 178 degrees
  Source counts = 33.0 +/- 6.5
  Background counts = 9.0
  Rate = 0.002 +/- 0.0003

[Fri Oct 21 04:36:45 2011] Off-axis axis estimate = 6.24'
[Fri Oct 21 04:37:29 2011] Using EEF radius (= 1.75 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:29 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Fri Oct 21 04:37:29 2011] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.091
[Fri Oct 21 04:37:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.75"
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 04:37:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 04:37:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 04:37:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11871_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 04:37:29 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 04:37:29 2011] Fit fullrun_ccd3_acisf11871_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 04:37:37 2011] Spatial fit model total counts = 49.099500, observed total counts = 49.000000
[Fri Oct 21 04:37:37 2011] Offset between fit and detection position for source 2 = 2.004813 pixels
[Fri Oct 21 04:37:37 2011] 49.369600 total counts/ 25.772700 bgd. counts: snr = 4.648095
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.004813 pixels
  Position = (1015.9, 1029.7) = 5 51 8.30 -57 6 46.5
  Extent = 1.3 (0.9-2.3)", rotation angle = 0
  Source counts = 23.6 +/- 7.0
  Background counts = 25.8
  Rate = 0.001 +/- 0.0004
[Fri Oct 21 04:37:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:37:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:37:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:37:37 2011] Source does appear to be extended
[Fri Oct 21 04:37:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:37:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:55 2011] Initial guess for spatial extent in simple fitting = 1.32"
[Fri Oct 21 04:37:55 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.887
[Fri Oct 21 04:37:55 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.32"
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 04:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 04:37:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 04:37:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11871_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:55 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 04:37:56 2011] fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 04:37:56 2011] Fit fullrun_ccd3_acisf11871_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 04:38:02 2011] Spatial fit model total counts = 34.781500, observed total counts = 37.000000
[Fri Oct 21 04:38:02 2011] Offset between fit and detection position for source 2 = 1.025504 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.025504 pixels
  Position = (1016.9, 1029.5) = 5 51 8.24 -57 6 46.6
  Extent = 1.6 (1.3-2.1)", rotation angle = 0
  Source counts = 33.1 +/- 5.8
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct 21 04:38:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:38:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:38:02 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:38:02 2011] Source does appear to be extended
[Fri Oct 21 04:38:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:39:22 2011] Not overwriting source region fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 04:39:22 2011] Extracting stamp from image fullrun_ccd3_acisf11871_pi14-548_cl_sm2.00.img.gz, (945, 957) - (1089, 1102)
[Fri Oct 21 04:39:22 2011] Writing fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 04:39:26 2011] ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.evt and ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 04:39:26 2011] Size of ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.evt.gz[events] = 55 counts
[Fri Oct 21 04:39:26 2011] Mean chipx,y = (85.51, 481.45)
[Fri Oct 21 04:39:26 2011] Mean tdetx,y = (4650.55, 3146.51)
[Fri Oct 21 04:39:26 2011] chipx,y range = (61.00-110.00, 456.00-506.00)
[Fri Oct 21 04:39:26 2011] Size of ../../acisf11871/products/events/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 117 counts
[Fri Oct 21 04:39:26 2011] ../../acisf11871/products/images/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.img and ../../acisf11871/products/images/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 04:39:26 2011] ../../acisf11871/products/spectra/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.pi and ../../acisf11871/products/spectra/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 04:39:26 2011] Not generating rmf since there are only 33 counts
[Fri Oct 21 04:39:29 2011] ../../acisf11871/products/lightcurves/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.lc and ../../acisf11871/products/lightcurves/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 04:40:13 2011] 176.09
[Fri Oct 21 04:40:22 2011] Updating aperture counts using extracted products
[Fri Oct 21 04:40:22 2011] Error reading totcts from fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 04:40:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 04:40:23 2011] Using photon index=1.80, rate=0.00168, arf fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 04:40:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 04:40:23 2011] Updating source flux to 2.2e-14
[Fri Oct 21 04:40:36 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 04:40:37 2011] acisf11871/analysis//spectral/fullrun_ccd3_acisf11871_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete