[Fri Oct 21 04:36:43 2011] Detection parameters:
  Position = (814.5, 554.5) = 5 52 7.79 -57 5 6.5
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 21.3 +/- 4.7
  Background counts = 0.7
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 04:36:44 2011] Off-axis axis estimate = 2.89'
[Fri Oct 21 04:37:28 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:28 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 21 04:37:28 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.840
[Fri Oct 21 04:37:28 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.56"
[Fri Oct 21 04:37:28 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 04:37:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 04:37:28 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 04:37:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 04:37:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11871_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:28 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 04:37:28 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 04:37:28 2011] Fit fullrun_ccd2_acisf11871_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 04:37:36 2011] Spatial fit model total counts = 23.564300, observed total counts = 23.000000
[Fri Oct 21 04:37:36 2011] Offset between fit and detection position for source 6 = 0.723756 pixels
[Fri Oct 21 04:37:36 2011] 23.378120 total counts/ 1.885120 bgd. counts: snr = 15.654080
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.723756 pixels
  Position = (814.9, 555.1) = 5 52 7.79 -57 5 6.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 21.5 +/- 4.8
  Background counts = 1.9
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 04:37:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:37:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:37:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:37:36 2011] Source does appear to be extended
[Fri Oct 21 04:37:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:37:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 04:37:53 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 21 04:37:53 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.127
[Fri Oct 21 04:37:53 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.56"
[Fri Oct 21 04:37:54 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 04:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 04:37:54 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 04:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 04:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11871_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 04:37:54 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 04:37:54 2011] fullrun_ccd2_acisf11871_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 04:37:54 2011] Fit fullrun_ccd2_acisf11871_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 04:38:01 2011] Spatial fit model total counts = 23.978700, observed total counts = 23.000000
[Fri Oct 21 04:38:01 2011] Offset between fit and detection position for source 6 = 0.077204 pixels
[Fri Oct 21 04:38:01 2011] 23.620250 total counts/ 1.424650 bgd. counts: snr = 18.595711
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.077204 pixels
  Position = (814.9, 555.2) = 5 52 7.79 -57 5 6.4
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 22.2 +/- 4.9
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002
[Fri Oct 21 04:38:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 04:38:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 04:38:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 04:38:01 2011] Source does appear to be extended
[Fri Oct 21 04:38:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 04:38:47 2011] Not overwriting source region fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.reg
[Fri Oct 21 04:38:47 2011] Extracting stamp from image fullrun_ccd2_acisf11871_pi14-548_cl_sm2.00.img.gz, (789, 530) - (840, 581)
[Fri Oct 21 04:38:47 2011] Writing fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6.gif
[Fri Oct 21 04:38:50 2011] ../../acisf11871/products/events/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.evt and ../../acisf11871/products/events/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct 21 04:38:50 2011] Size of ../../acisf11871/products/events/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.evt.gz[events] = 22 counts
[Fri Oct 21 04:38:50 2011] Mean chipx,y = (453.27, 700.00)
[Fri Oct 21 04:38:50 2011] Mean tdetx,y = (3761.00, 3632.73)
[Fri Oct 21 04:38:50 2011] chipx,y range = (440.00-471.00, 684.00-716.00)
[Fri Oct 21 04:38:50 2011] Size of ../../acisf11871/products/events/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 8 counts
[Fri Oct 21 04:38:50 2011] ../../acisf11871/products/images/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.img and ../../acisf11871/products/images/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct 21 04:38:50 2011] ../../acisf11871/products/spectra/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.pi and ../../acisf11871/products/spectra/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct 21 04:38:50 2011] Not generating rmf since there are only 22 counts
[Fri Oct 21 04:38:53 2011] ../../acisf11871/products/lightcurves/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.lc and ../../acisf11871/products/lightcurves/fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct 21 04:39:22 2011] 193.109
[Fri Oct 21 04:40:22 2011] Updating aperture counts using extracted products
[Fri Oct 21 04:40:22 2011] Error reading totcts from fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct 21 04:40:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 04:40:22 2011] Using photon index=1.80, rate=0.00112, arf fullrun_ccd2_acisf11871_pi14-548_pass1_cl_src6.arf
[Fri Oct 21 04:40:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 04:40:22 2011] Updating source flux to 1.3e-14
[Fri Oct 21 04:40:32 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting