[Fri Sep 23 20:36:57 2011] Detection parameters:
  Position = (1059.7, 702.2) = 23 42 22.56 -54 10 10.0
  Extent = 2.2" x 0.8", rotation angle = 161 degrees
  Source counts = 39.9 +/- 6.6
  Background counts = 4.1
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 20:36:58 2011] Off-axis axis estimate = 6.71'
[Fri Sep 23 20:37:46 2011] Using EEF radius (= 2.01 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:37:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 20:37:46 2011] Initial guess for spatial extent in simple fitting = 2.01"
[Fri Sep 23 20:37:46 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.963
[Fri Sep 23 20:37:46 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.01"
[Fri Sep 23 20:37:46 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 20:37:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 20:37:46 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 20:37:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 20:37:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11870_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:37:46 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 20:37:46 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 20:37:46 2011] Fit fullrun_ccd3_acisf11870_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 20:37:57 2011] Spatial fit model total counts = 44.351000, observed total counts = 44.000000
[Fri Sep 23 20:37:57 2011] Offset between fit and detection position for source 2 = 1.329660 pixels
[Fri Sep 23 20:37:57 2011] 43.615900 total counts/ 11.281400 bgd. counts: snr = 9.626860
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.329660 pixels
  Position = (1060.8, 702.8) = 23 42 22.52 -54 10 9.9
  Extent = 1.1 (0.9-1.6)", rotation angle = 0
  Source counts = 32.3 +/- 6.6
  Background counts = 11.3
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 20:37:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:37:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:37:57 2011] Source does appear to be extended
[Fri Sep 23 20:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 20:38:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:38:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 20:38:13 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Sep 23 20:38:13 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Fri Sep 23 20:38:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.13"
[Fri Sep 23 20:38:14 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 20:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 20:38:14 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 20:38:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 20:38:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11870_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:38:14 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 20:38:14 2011] fullrun_ccd3_acisf11870_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 20:38:14 2011] Fit fullrun_ccd3_acisf11870_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 20:38:24 2011] Spatial fit model total counts = 38.032000, observed total counts = 37.000000
[Fri Sep 23 20:38:24 2011] Offset between fit and detection position for source 2 = 0.038667 pixels
[Fri Sep 23 20:38:24 2011] 38.368460 total counts/ 7.112560 bgd. counts: snr = 11.719769
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.038667 pixels
  Position = (1060.8, 702.7) = 23 42 22.52 -54 10 9.9
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 31.3 +/- 6.2
  Background counts = 7.1
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 20:38:24 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:38:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:38:24 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:38:24 2011] Source does appear to be extended
[Fri Sep 23 20:38:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 20:41:17 2011] Not overwriting source region fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 23 20:41:17 2011] Extracting stamp from image fullrun_ccd3_acisf11870_pi14-548_cl_sm2.00.img.gz, (1010, 652) - (1111, 753)
[Fri Sep 23 20:41:17 2011] Writing fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2.gif
[Fri Sep 23 20:41:24 2011] ../../acisf11870/products/events/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.evt and ../../acisf11870/products/events/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 23 20:41:24 2011] Size of ../../acisf11870/products/events/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.evt.gz[events] = 37 counts
[Fri Sep 23 20:41:24 2011] Mean chipx,y = (702.03, 202.57)
[Fri Sep 23 20:41:24 2011] Mean tdetx,y = (4929.43, 3763.03)
[Fri Sep 23 20:41:24 2011] chipx,y range = (686.00-723.00, 184.00-225.00)
[Fri Sep 23 20:41:24 2011] Size of ../../acisf11870/products/events/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 22 counts
[Fri Sep 23 20:41:24 2011] ../../acisf11870/products/images/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.img and ../../acisf11870/products/images/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 23 20:41:24 2011] ../../acisf11870/products/spectra/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.pi and ../../acisf11870/products/spectra/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 23 20:41:24 2011] Not generating rmf since there are only 31 counts
[Fri Sep 23 20:41:30 2011] ../../acisf11870/products/lightcurves/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.lc and ../../acisf11870/products/lightcurves/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 23 20:42:34 2011] 181.041
[Fri Sep 23 20:42:41 2011] Updating aperture counts using extracted products
[Fri Sep 23 20:42:41 2011] Error reading totcts from fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 23 20:42:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 20:42:41 2011] Using photon index=1.80, rate=0.00158, arf fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2.arf
[Fri Sep 23 20:42:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 20:42:41 2011] Updating source flux to 2.1e-14
[Fri Sep 23 20:42:49 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 20:42:50 2011] acisf11870/analysis//spectral/fullrun_ccd3_acisf11870_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete