[Fri Sep 23 20:36:54 2011] Detection parameters:
  Position = (688.9, 1272.5) = 23 43 32.19 -54 9 57.2
  Extent = 1.1" x 0.6", rotation angle = 34 degrees
  Source counts = 24.8 +/- 5.1
  Background counts = 1.2
  Rate = 0.001 +/- 0.0003

[Fri Sep 23 20:36:56 2011] Off-axis axis estimate = 5.23'
[Fri Sep 23 20:37:44 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:37:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 20:37:44 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Fri Sep 23 20:37:44 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Fri Sep 23 20:37:44 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.28"
[Fri Sep 23 20:37:44 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 23 20:37:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 20:37:45 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 23 20:37:45 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2.csv
[Fri Sep 23 20:37:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11870_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:37:45 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 23 20:37:45 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 23 20:37:45 2011] Fit fullrun_ccd2_acisf11870_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 23 20:37:55 2011] Spatial fit model total counts = 26.543300, observed total counts = 26.000000
[Fri Sep 23 20:37:55 2011] Offset between fit and detection position for source 1 = 0.577227 pixels
[Fri Sep 23 20:37:55 2011] 26.657690 total counts/ 1.014790 bgd. counts: snr = 25.455349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.577227 pixels
  Position = (689.3, 1272.9) = 23 43 32.19 -54 9 57.3
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 25.6 +/- 5.2
  Background counts = 1.0
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 20:37:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:37:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:37:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:37:55 2011] Source does appear to be extended
[Fri Sep 23 20:37:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 20:38:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:38:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 20:38:13 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Sep 23 20:38:13 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.999
[Fri Sep 23 20:38:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.10"
[Fri Sep 23 20:38:13 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 23 20:38:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 20:38:13 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 23 20:38:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2.csv
[Fri Sep 23 20:38:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11870_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:38:13 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 23 20:38:13 2011] fullrun_ccd2_acisf11870_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 23 20:38:13 2011] Fit fullrun_ccd2_acisf11870_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 23 20:38:23 2011] Spatial fit model total counts = 25.774800, observed total counts = 26.000000
[Fri Sep 23 20:38:23 2011] Offset between fit and detection position for source 1 = 0.113158 pixels
[Fri Sep 23 20:38:23 2011] 25.794050 total counts/ 3.031250 bgd. counts: snr = 13.074190
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113158 pixels
  Position = (689.3, 1273.0) = 23 43 32.19 -54 9 57.2
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 22.8 +/- 5.1
  Background counts = 3.0
  Rate = 0.001 +/- 0.0003
[Fri Sep 23 20:38:23 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:38:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:38:23 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:38:23 2011] Source does appear to be extended
[Fri Sep 23 20:38:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 20:39:57 2011] Not overwriting source region fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 20:39:57 2011] Extracting stamp from image fullrun_ccd2_acisf11870_pi14-548_cl_sm2.00.img.gz, (644, 1227) - (735, 1319)
[Fri Sep 23 20:39:57 2011] Writing fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 20:40:03 2011] ../../acisf11870/products/events/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.evt and ../../acisf11870/products/events/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 20:40:03 2011] Size of ../../acisf11870/products/events/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Fri Sep 23 20:40:03 2011] Mean chipx,y = (987.85, 811.31)
[Fri Sep 23 20:40:03 2011] Mean tdetx,y = (3872.31, 3098.15)
[Fri Sep 23 20:40:03 2011] chipx,y range = (975.00-1007.00, 794.00-834.00)
[Fri Sep 23 20:40:03 2011] Size of ../../acisf11870/products/events/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 20 counts
[Fri Sep 23 20:40:03 2011] ../../acisf11870/products/images/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.img and ../../acisf11870/products/images/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 20:40:03 2011] ../../acisf11870/products/spectra/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.pi and ../../acisf11870/products/spectra/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 20:40:03 2011] Not generating rmf since there are only 22 counts
[Fri Sep 23 20:40:07 2011] ../../acisf11870/products/lightcurves/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.lc and ../../acisf11870/products/lightcurves/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 20:41:16 2011] 175.855
[Fri Sep 23 20:42:40 2011] Updating aperture counts using extracted products
[Fri Sep 23 20:42:40 2011] Error reading totcts from fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 20:42:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 20:42:40 2011] Using photon index=1.80, rate=0.00115, arf fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 20:42:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 20:42:41 2011] Updating source flux to 1.6e-14
[Fri Sep 23 20:42:48 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 20:42:49 2011] acisf11870/analysis//spectral/fullrun_ccd2_acisf11870_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete